Search results for: 'Roll e'

TT-1040 COMPUTERIZED TENSILE TESTING MACHINE, 150KN COMPUTERIZED TENSILE TESTING MACHINE KEY SPECIFICATION: CAPACITY: KGF 3000, 5000, 10000, 15000 KN 30, 50, 100, 150 UNIT: LOAD N, KN, G, KG, TON, LB DISPLACEMENT: mm, CM, INCH LOAD RESOLUTION: 1/20,000 LOAD ACCURACY: ±1% (±0.5% OPTIONAL) LOAD AMPLIFICATION: X 1, X 2, X 5, X 10 AUTO RANGE TESTING WIDTH (mm): 560 (800 OPTIONAL) CROSSHEAD TRAVEL (mm): 980 (1480 OPTIONAL) TESTING STROKE: CROSSHEAD TRAVEL MINUS UPPER/LOWER GRIPS AND GRIPPING LENGTH TEST SPEED RANGE (mm/MIN): 0.5~500 OR 0.2~200, 0.2~200 OR 0.5~500 MAXIMUM FORCE AT FULL SPEED (KGF): 1000, 2000 MAXIMUM SPEED AT FULL LOAD (mm/MIN): 100, 50 SPEED ACCURACY: ±0.5% SERVO CONTROL DISPLACEMENT RESOLUTION: 0.001 DRIVING METHOD: AC SERVO MOTOR POWER SPECIFICATIONS: 3Ø, 220VAC, 50/60Hz (380/415V OPTIONAL) CONSUMPTION: 3000 KGF 30 KN 5000 KGF 50 KN 10000 KGF 100 KN 15000 KGF 150 KN 2 KVA, 3 KVA, 5 KVA, 10 KVA DIMENSIONS FRAME (mm): 1300 X 600 X 2130 1540 X 600 X 2130 1300 X 600 X 2630 1540 X 600 X 2630 CONTROL BOX (mm) COMPUTER TYPE 1200 X 600 X 740 MICRO-COMPUTER TYPE 660 X 600 X 740 WEIGHT (KG) FRAME 800, CONTROL BOX 100 FRAME 1200, CONTROL BOX 100 STANDARD ACCESSORIES: TENSILE GRIPS X 1 SET, NECESSARY TOOLS X 1 SET, OPERATIONAL MANUAL X 1 COPY, CERTIFICATE OF CALIBRATION X 1 COPY Learn More

TT-1002 CNC DUAL FAST WIRE (HORIZONTAL & VERTICAL) CONTOUR CUTTER, CUT SPEED 10 METERS PER MINUTE MAXIMUM BUN SIZE: LENGTH 3000mm x WIDTH 2200mm x HEIGHT 1300mm MAIN FEATURES OF CONTOUR CUTTER: 1. ELIMINATES THE NEED TO MAKE, REPAIR AND STORE TEMPLATES; 2. INTEGRATED DESIGN & CUTTING PROGRAM. JUST DESIGN AND CUT; 3. COST SAVINGS BY AUTOMATICALLY ARRANGING THE PRODUCT (NESTING OF SHAPES TO MAXIMIZE MATERIAL USAGE) 4. SUPPORTS NUMERIC INSTRUMENTS; 5. HIGHER MATERIAL UTILIZATION RESULTING FROM COMPUTER AIDED NESTING OF SHAPES; 6. CUT SPEED CAN BE SET TO ARRIVE AT THE BEST CUT SPEED FOR DIFFERENT FOAMS; 7. CAN PRE-CUT ON THE COMPUTER TO CHECK CUTTING COURSE; Learn More

J-4354 MATSUSHITA TECMIC POCKET COIL PLANT WITH 2 COILERS FEEDING 1 ASSEMBLER, YEAR 2011- CAPACITY 5000 TO 6000 COILS PER HOUR TOTAL (EACH COILER MAKES 3000 COILS PER HOUR) MAKE: MATSUSHITA TECMIC YEAR: 2011 2 COILERS FEEDING 1 ASSEMBLER AS FOLLOWS: VOLTAGE: 480 VOLTS, 3-PHASE CURRENTLY CONNECTED TO A 600 VOLT SUPPLY WITH A TRANSFORMER DOWNSTEPPING TO 480 VOLTS, 3-PHASE, TO RUN ENTIRE SETUP. TOTAL REQUIRED FLOORSPACE: 53 FEET x 23 FEET FOR TWO COILERS, TURNTABLE, POCKET COIL MACHINES AND ASSEMBLER (15,900mm x 6900mm) CURRENTLY RUNNING UNTIL AUGUST 31ST. STATUS: CURRENTLY RUNNING QUANTITY: 2 COILERS FEEDING 1 ASSEMBLER Learn More

YY-1966 MELTBLOWN LINE, PRODUCTION SPEED MAXIMUM 100 METERS PER MINUTE 1750mm final trim width (68 inches) DETAILS: CONTAINERS TO SHIP APPROXIMATELY: 15 CONTAINERS 40” OT (THERE MAY BE NEEDED SOME HC OR OUT OF GAUGE CONTAINERS) IT HAS COOLING CALENDER IT HAS WINDER WITH SLITTERS IT PRODUCES 1 TO 5 MICRON (EVEN UNDER 1 MICRON) RANGE OF GSM: IT PRODUCES 15 TO 300 GSM STATUS: ASSEMBLED, IT CAN RUN PRODUCTION YEAR: THE LINE HAS BEEN PRODUCED IN SEPTEMBER 2020 AND IT HAS BEEN IN PRODUCTION ONLY FOR ONE YEAR. QUANTITY: 1 Learn More

T-7027 HOT MELT LAMINATION MACHINE, WORKING WIDTH 1800mm, YEAR 2004 CONSISTS OF FOLLOWING UNITS; FABRIC ENTRY, LAMINATION, LINING ENTRY, EXIT, MITSU BRAND HEATING-CHEMICAL MARIO COTTA BRAND SIDE CUTTING FABRIC AND LINING CENTERING FEATURE INVERTORS UNDERUTILISED SITUATION: INSTALLED AND RUNNING QUANTITY: 1 Learn More

V-1996 MICROFIBER OPENER WITH 4 FILLING FANS FOR PILLOWS AND CUSHIONS A. MICROFIBER OPENER B. OPENING DRUM 900mm WORKING WIDTH C. FEED SUCTION FAN D. RECEIVING BOX – METAL FABRICATION E. FILLING FANS AT EXIT (FAN-1112) QUANTITY: 1 SET Learn More

T-8541 WET WIPES MACHINE, CAPACITY 5 TO 30 PIECES PER PACK WET WIPES MACHINE CAPACITY: 5 TO 30 PIECES PER PACK DRIVE MODE: AUTOMATIC FOLDING: 300 TO 400 PIECES PER MINUTE (STABLE SPEED) PACKAGING: 40 BAGS PER MINUTE (STABLE SPEED) MACHINE SIZE (L X W X H): 5000mm X 1200mm X 2100mm QUANTITY: 1 Learn More

YY-1366 BAG CLOSING MACHINE HEAD, INSTRUCTION MANUAL FOR OPENRATOR SAFETY: - THIS MANUAL BOOK CONTAINS INSTRUCTIONS AND PRECAUTIONS FOR USING THE BAG CLOSING MACHINE HEAD. BE SURE TO READ AND UNDERSTAND THE MANUAL BOOK BEFORE USING THE MACHINES. - KEEP THIS MANUAL BOOK NEAR THE SEWING MACHINE FOR REFERENCE. BE SURE TO ATTACH THIS MANUAL BOOK TO THE MACHINE WHEN LENDING OR TRANSFER IT TO ANOTHER PERSON OR COMPANY. - PLEASE CONTACT THIS MANUAL BOOK FROM US IF IT LOST. - THE CONTENTS OF THIS MANUAL BOOK ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE FOR IMPROVEMENT AND SAFETY PURPOSE. Learn More

T-7951PRE AND FINISH – NEEDLER, WIDTH 2800mm TO 2900mm ITEM 001 PRE - NEEDLER QUANTITY: 1 ITEM 002 FINISH - NEEDLER QUANTITY: 1 Learn More

J-3416 DORNIER PTSL8 EASY LENO RAPIER LOOM, WORKING WIDTH 2200mm, YEAR 2005 WITH TWO WARP SHAFTS, UPPER AND LOWER 8 COLORS QUANTITY: 1 Learn More