Search results for: 'Fra'

T-9753 BRUNO MODEL FH250-T TOGGLE DIE CUTTING PRESS BELT-FEED FOR SHEET AND ROLLED MATERIALS, 78” X 54”, 250 TON-YEAR 2003 78” X 54” BRUNO FH 250-T YEAR: 2003 QUANTITY: 1 Learn More

T-9752 KARL MAYER CARBON MACHINES BIAXIAL AND MULTIAXIAL PROPERTIES: SINCE ALL FIBERS POINT IN ONE DIRECTION, THE SCRIM CAN BE IDEALLY DRAPED GOOD SOAKABILITY WITH LITTLE RESIN CONSUMPTION CAN BE DRAPED VERY WELL AROUND CURVES AND EDGES EASY TO CUT ELECTRICALLY CONDUCTIVE, INFUSIBLE HIGH STRENGTH AND RIGIDITY DUE TO GRAPHITE-LIKE FIBER STRUCTURE BIOCOMPATIBLE TRANSPARENT TO X-RAYS LOW SPECIFIC WEIGHT IDEAL FOR SURFACE USE (LITTLE FIBER IMPRINTS) IDEAL FOR PROCESSING WITH EPOXY RESIN! TEXTILE SEMI-FINISHED PRODUCTS MADE OF PRE-SPREAD AND PLANE-PARALLEL LAID FIBERS FORM THE GROUP OF UNIDIRECTIONAL FABRICS. THE FIBERS ARE USUALLY LAID AT 0°, MORE RARELY AT 90°. BY LAYING THE UD FABRICS ALONG THE LINES OF FORCE ACTING IN THE COMPONENT, THE LIGHTWEIGHT POTENTIAL OF THE CARBON FIBER IS OPTIMALLY EXPLOITED. UD FABRICS CONSIST OF ONE OR MORE SUPERIMPOSED FIBER LAYERS FIXED WITH AN EPOXY-COMPATIBLE BINDER THREAD. THE SPECIAL SPREADING TECHNIQUE PRODUCES FABRICS WITH HIGH FIBER PARALLELISM, WITHOUT KNOTS AND FIBER TWIST. SPREAD FIBERS ABSORB THE RESIN BETTER, RESULTING IN HIGHEST LAMINATE STRENGTHS. QUANTITY: 3 LINES Learn More

J-4214 PICANOL OPTIMAX-4-P-540 LOOM, WIDTH 5400mm, 4 COLORS, STAUBLI CAM BOX, YEAR 2011 POSITIVE RAPIER SYSTEM (GPG) WITH GROB KFW5600 WARP STOP MOTION BARS 1100mm WARP BEAM BACKREST DIRECT WARP CONTROL ELSY L&R MECHANICAL CLAMP MAXIMUM MECHANICAL SPEED: 280 RPM OPTISPEED LIGHT CURTAIN 1 BEAM 1000mm – Q4 6 HEALD FRAMES STEEL HEDDLE XLF XTRA LIGHT 152 “11”, TYPE “C” LED ILLUMINATION ABOVE THE FABRIC & BELOW TOP BEAM (BACK SIDE) INCLUDING BATCHING MOTION NEUENHAUSER OPTIWINDER DW3225 QUANTITY: 1 Learn More

T-9599 PERSPIROMETER / PERSPIRATION FASTNESS TESTER KEY SPECIFICATION: WEIGHTS: A: 3.63KG (8LB), B: 0.45 (1LB), C: 0.90KG (2LB, PALLET) AATCC LOAD: A+C=10LB ISO LOAD: A+B+C=11LB DIMENSIONS: 165 X 75 X 145mm (L X W X H) WEIGHT: 8 KG Learn More

T-9674 HEAVY DUTY INCLINED FEED CONVEYOR – NEW, 36” WIDE X 20’ LONG 460V/3PH/60Hz NOTE THE FRONT LEGS ARE SET BACK 80”. THERE IS A TWO YEAR WARRANTY ON THE MOTOR AND GEARBOX. QUANTITY: 1 Learn More

YY-1834 AUTOMATIC ANGLE FOAM CUTTING MACHINE WITH CONVEYOR, CUTTING ANGLE 16 TO 60° THE MACHINE IS WITH TOUCH SCREEN & PLC AUTO CONTROL, THE CUTTING BLADE CAN MOVE UP & DOWN AUTOMATICALLY, WITH AUTOMATIC CONVEYOR AND POSITIONING BAR TO LOAD THE FOAM SHEET. WITH MOTOR TO ADJUST THE ANGLE, WITH A METER TO SHOW THE ANGLE WITH TOUCH SCREEN AND MOTOR TO CONTROL THE BELT AND BLADE FRAME UP AND DOWN, AND VACUUM MOTOR TO SUCK THE FOAM SHEET DOWN. HOT NEW FEATURE: CONVEYOR HAS PERFORATIONS AND MATERIAL BEING CUT STAYS STABLE IN ITS POSITION DUE TO THE SUCTION MOTOR PROVIDING SUCTION THROUGH CONVEYOR PERFORATIONS, ALLOWS MACHINE TO GIVE CLEAN CUTS EVERY TIME. QUANTITY: 1 Learn More

V-2003 DOUBLE SHAFT SHREDDER, TWO MOTORS, TOTAL 11KW, 1200mm (48 INCHES) WORKING WIDTH FOR DENSE PLASTIC WASTE SUCH AS INJECTION PLASTIC WASTE, ONE 5.5KW MOTOR FOR EACH OF THE TWO ROLLS (ONE ON EACH SIDE) QUANTITY: 1 Learn More

J-4109 HIGH-SPEED ELECTRONIC BAR TACKING SEWING MACHINE, LIFT HEIGHT 117mm, THROAT 280mm HIGH QUALITY DIE STEEL GUARANTEES RIGIDITY, REDUCES DEFORMATION AND MAKES THE HEAD SEPARATION SMOOTH QUANTITY: 1 Learn More

T-9324 THIBEAU CA6 WOOL CARD OR ACRYLIC, WORKING WIDTH 2500mm, YEAR 1994 1ST MODEL, BREAST CYLINDER WITH 2 COUPLES OF WORKERS/STRIPPERS, 2ND MODEL, DRUM WITH 5 COUPLES OF WORKERS/STRIPPERS, COMBER, AUTOMATIC DELIVERY 1000 X 1200mm, WITH DRAFTING HEAD. QUANTITY: 2 SETS Learn More

J-4121 HIGH-SPEED CROSS LAPPER, INPUT WIDTH 2900mm, OUTPUT WIDTH 4500mm, 80 METERS/MINUTE APPLICATION: USED TO FOLD EVENLY AND LAP THE FIBER WEBS INTO CERTAIN WIDTH AND THICKNESS INPUT WIDTH: 2900mm OUTPUT WIDTH: 4500mm SPEED: 80 METERS PER MINUTE QUANTITY: 1 Learn More