Search results for: 'Died'

R-3247 DIEDRICH IR-12 ROASTER WITH AFTERBURNER - 12 KILOS

HERE IS A ROASTER/AFTERBURNER/PROFILER PACKAGE THAT CONSIST OF A 2006 MACHINE - THAT WAS SENT IN TO THE DIEDRICH FACTORY FOR A COMPLETE REBUILD, UPDATE TO "SAME AS" NEW CONDITION. PLUS THE BIGGEST PROFILER AVAILABLE WAS ADDED AND A NEW AFTERBURNER WITH OVERSIZED MODULATING BURNER. ALL OF THIS IN 2013. SO THIS IS A TOTALLY UNUSUAL PACKAGE.

THE AFTERBURNER TAKES UP 42" SQUARE ON THE BASE WITH A ROUND TOP OF 36" DIAMETER. AND 85" TALL THERE IS SOME FLEXIBILITY ON PLACING THE ROASTER AND AFTERBURNER AS THE 2 ARE CONNECTED WITH PIPING THAT WOULD BE LOCALLY SUPPLIED IF DIFFERENT THAN THE ONE THAT COME WITH THE MACHINE.
IR 12 DIEDRICH COFFEE ROASTER
FULLY REBUILT AND UPGRADED BY DEIDRICH MANUFACTURING IN 2013
FULLY AUTOMATED WITH LASTEST PC BASED TECHNOLOGY
STATE OF THE ART AFTERBURNER BUILT IN 2013
DIMENSIONS: WIDTH 30" X DEPTH 55" X HEIGHT 77"
1000 POUNDS PLUS CRATING ON THE ROASTER
1500 POUNDS FOR THE AFTERBURNER
120 VOLT ELECTRICAL
BLACK AND BRASS IN COLOR.

QUANTITY: 1

Learn More

TT-3212 DIEDRICH CR-70 FULLY AUTOMATED ROASTER, 70 KILO, YEAR 2023 QUANTITY: 1 Learn More

TT-1587 DIEDRICH CR-70 MINI-PLANT, FULLY AUTOMATED ROASTER SYSTEM CR-70 PACKAGE QUANTITY: 1 Learn More

R-3263 DIEDRICH IR-24U ROASTER & EQUIPMENT - 24 KILOS, YEAR 2008

VERY UNUSUAL THAT WE GET SUCH A COMPLETE ROASTING LINE AND HAVE ALL OF IT BE FROM THE SAME DIEDRICH MANUFACTURER. ALL COORDINATED ACCORDING TO COLOR AND IMAGE. NOTICE THAT THERE IS A COFFEE BAG ATTACHED TO THE OUTLET AIR OF THE DE-STONER - BUT THAT CAN BE VENTED TO THE OUTSIDE WORLD AS WELL - JUST A LONG AS YOU ARE NOT BLOWING COFFEE DUST ALL OVER THE PLANT. IN THE FACE OF THE ROASTER - SOME OF THE ORIGINAL PAINT HAS PEELED BACK DUE TO HEAT - AND THE GOOD NEWS IS THAT MOST ANY AUTO PARTS STORE HAS HIGH TEMP PAINT FOR MOTORCYCLE EXHAUST AND ENGINE BLOCKS - SO TOUCH UP FOR THAT AREA IS SIMPLE.

MECHANICALLY - THIS MACHINE HAS BEEN ALL MAINTAINED BY THE SAME PERSON SINCE IT WAS NEW 6.5 YEARS AGO - SO THAT IS REALLY GOOD. THE LAST USE WAS JUNE OF 2015 (REPLACED BY LARGER MACHINE) AND HAS BEEN SITTING EVER SINCE AND NOW IS IN THE WAY OF GREEN STORAGE SO ANXIOUS TO GET IT OUT OF THE WAY. FULL CRATING WILL BE NEEDED AND I THINK THAT IT WOULD ALL FIT INTO A 20 FOOT CONTAINER. A MODEST FEE FOR CRATING, BLOCKING AND CONTAINER LOADING WILL BE NEEDED.

ELECTRICAL ON THIS EQUIPMENT IS 230 VOLT 50/60HZ AS THE MOTORS ARE ALL DUAL VOLTAGE.
NATURAL GAS

QUANTITY: 1

Learn More

R-3248 DIEDRICH IR-12 ROASTER - 12 KILOS

HERE IS THE CLASSIC DIEDRICH IR12. USED, 1989 WITH SOME NICE UPGRADES TO THE MANUAL ELECTRONICS. THE MACHINE HAS BEEN IN CONSTANT MECHANICAL WATCHFULNESS - AND THIS IT IS IN VERY NICE CONDITION. ONCE THIS MACHINE GETS RE-INSTALLED YOU WILL NEED TO ADJUST THE DRUM (THIS IS NORMAL ACTIVITY. AND AS WE TESTED IT DURING OUR REVIEW THE HIGH TEMP LIMIT SWITCH DID NOT SEEM TO SHUT ENGAGE AS WE WOULD HAVE EXPECTED, BUT WE DID NOT HAVE OUR TOOL KIT WITH US FOR ACTUAL DETAIL ANALYSIS. WE DID FIND THAT THE BEARINGS WERE NEW AND EVERYTHING SEEMS TO WORK GREAT. THE HIGH TEMP THING MIGHT HAVE JUST BEEN SET HIGHER THAN NORMAL. AS THIS IS SOMETHING TO CHECK DURING INSTALL. THAT DOES NOT STOP THE RUNNING OF THE MACHINE. IT IS NOW SITTING IN STORAGE - JUST WAITING FOR A NEW HOME.
29" WIDE
51" DEEP - BUT LEAVE ROOM IN THE BACK TO GET AROUND THE MACHINE FOR CLEANING AND REPAIR PLUS YOU HAVE TO RUN EXHAUST VENT TO THE OUTSIDE WORLD.
71" TALL
4" EXHAUST OUTLET - BUT YOU WILL WANT TO TRANSITION TO 5 OR 6" VENT TUBING DEPENDING ON YOUR INSTALLATION
NATURAL GAS
110 VOLT ELECTRICAL - 16 AMPS
ALLOW FOR A CRATED WEIGHT OF 1500 POUNDS. (60" X 42" X 78")
THIS IS A MANUAL WORK-HORSE

QUANTITY: 1

Learn More

P-5066 DIEDRICH IR ROASTER 12 KILOS

DIEDRICH
IR ROASTER
12 KILOS
AVERAGE 75 POUNDS PER HOUR. MAXIMUM 24 POUNDS PER BATCH

QUANTITY: 1

Learn More

MAKE: SAURER MODEL: TERRY MATIC S-D-400S USEFUL WIDTH: 2450mm ELECTRONIC RAPIER FOR 10 TO 12 FRAMES FIMTESSILE DOBBY-PLASTIC FILM SYSTEM 4 COLOR WEFT SELECTOR ROJ FEEDERS BIJUR CENTRALIZED LUBRICATION BRAKE CLUTCH UNIT EP825HT Learn More

R-3259 PRIMO 35 ROASTER TOP CONDITION 2009 - 15 KILOS

35 # PER BATCH
35 LBS. CAPACITY, CARBON STEEL DRUM, INFRARED CERAMIC BURNERS.
ROAST AND COOL AT THE SAME TIME - AS EACH FUNCTION HAS INDEPENDENT FANS, MOTORS AND CONTROL.
EXTRA SET OF BURNERS INCLUDED AS SPARES FOR FUTURE USE WHEN NEEDED
PROPANE HEAT - 96,000 BTU
220 VOLT 60HZ SINGLE PHASE ELECTRICAL
WIRED FOR CROPSTER OR ARTISEN PROFILE TRACKING
REMOTE CHAFF COLLECTOR
MAIN ROASTER BODY - 30" X 66" X 73" TALL - PLUS ROOM FOR PIPES AND MOTOR SERVICE IN THE BACK.
ALLOW ANOTHER 36" SQUARE AREA FOR CHAFF COLLECTION - AND KEEP IN MIND THAT THE LOCATION IS VERY USABE TO FIT YOUR FACILITY.

THIS PRIMO 35 IS A GOOD LOOKING ROASTER - AND IT HAS BEEN USED SPARINGLY SINCE 2009 AS THIS IS A "SMALL BATCH" USE BY A MUCH LARGER INSTITUTIONAL-TYPE OPERATION - BUT HIS WHOLE BEAN BUSINESS HAS GROWN AND IT IS NOT COST EFFECTIVE TO HAVE A DEDICATED ROASTMASTER JUST DOING 15 KILO PER BATCH. SO A LARGE MACHINE IS BEING INSTALLED. GOOD NEWS FOR THE BUYER.

ANYBODY LIKING DIEDRICH ROASTERS WILL BE HAPPY WITH THIS AS THEY ARE INTERNALLY SIMILAR AS THE OWNER OF PRIMO USED TO BE SHOP FOREMAN BACK WHEN DIEDRICH WAS LOCATED IN CALIFORNIA. ANOTHER THING THAT IS NICE ABOUT THIS MACHINE IS THE EASE OF WORKING ON IT IF AND WHEN IT REQUIRES ATTENTION. MOST EVERY PART IN THE MACHINE IS "OFF THE SHELF" AND THAT MAKES REPAIRS AND MAINTENANCE REAL EASY. MAKE SURE YOU LUBE ON SCHEDULE AND MAKE SURE YOU USE HIGH TEMP GREASE (LINK) AS EXAMPLE, ALTHOUGH THERE ARE OTHER SELECTIONS IN THAT SAME AREA OF THE WEB STORE.

LOTS OF PEOPLE USE THIS MACHINE AS A "STARTER MACHINE" SINCE IT IS SO EASY TO OPERATE. EVEN IF YOU DO NOT USE FANCY PROFILE TRACKING - IT IS STILL GREAT FOR MANUAL ROASTING AND HANDS-ON DEVELOPMENT.

QUANTITY: 1

Learn More

R-3276 GOTHOT CAST IRON ROASTER ASSEMBLY PROJECT - 120 KILOS

THIS INCLUDES A LEFT-SIDE DUMP ROASTER, LOADER, DE-STONER, AFTERBURNER.
IT IS CURRENTLY IN STORAGE IN 8 PALLETS AND WILL REQUIRE ASSEMBLY AND RE-PAINTING AND SOME REBUILDING OF THE DRUM "DUMP DOOR" ASSEMBLY.
THE ROASTER WAS WORKING UNTIL THE DAY IT WAS DISCONNECTED. HOWEVER THE MOTORS AND FAN BLADES AS WELL AS SOME CONNECTING TUBES ARE OLD ENOUGH TO WARRANT RELACING. THIS IS A PROJECT - BUT GOTHOT IS WORTH PRESERVING
AFTERBURNER WAS BUILT BY DIEDRICH AND IS MUCH NEWER THAN THE ROASTER.
IT IS 3 PHASE POWER AND NATURAL GAS.

QUANTITY: 1

Learn More