Search results for: 'beam p'

LOOM #7 PU 85VSD 150KR D1 6 GROB HORGEN HEALD FRAMES 3 TECNO MATEX PREFEEDERS 1 SULZER RUTI WARP BEAM BEAM DIAM: 80CM BEAM LENGHT: 97 INCHES (APPROX. 246CM) 1 CLOTH ROLL: 85 1/2 INCHES STAUBLI HEAD: YEAR 1985 MAX. HEALD FRAME CAP: 16 FRAMES LOOM #8 PU 85VSD 150KR D1 6 GROB HORGEN HEALD FRAMES 3 TECNO MATEX PREFEEDERS 1 SULZER RUTI WARP BEAM BEAM DIAM: 80CM BEAM LENGHT: 98 INCHES (APPROX. 249CM) 1 CLOTH ROLL: 85 1/2 INCHES STAUBLI HEAD: YEAR 1985 MAX. HEALD FRAME CAP: 16 FRAMES LOOM #9 PU 85VSD 150KR D1 6 GROB HORGEN HEALD FRAMES 1 SAVI TEC-B PREFEEDER 3 TECNO MATEX PREFEEDERS 1 SULZER RUTI WARP BEAM BEAM DIAM: 80CM BEAM LENGHT: 97 INCHES (APPROX. 246CM) 1 CLOTH ROLL: 85 1/2 INCHES STAUBLI HEAD: YEAR 1985 MAX. HEALD FRAME CAP: 17 FRAMES LOOM #10 PU 85VSD 150KR D1 4 GROB HORGEN HEALD FRAMES 3 TECNO MATEX PREFEEDERS 1 SULZER RUTI WARP BEAM BEAM DIAM: 80CM BEAM LENGHT: 98 1/2 INCHES (APPROX. 250CM) 1 CLOTH ROLL: 85 1/2 INCHES STAUBLI HEAD: YEAR 1985 MAX. HEALD FRAME CAP: 17 FRAMES LOOM #11 PU 85VSD 150KR D1 6 GROB HORGEN HEALD FRAMES 4 TECNO MATEX PREFEEDERS 1 SULZER RUTI WARP BEAM BEAM DIAM: 80CM BEAM LENGHT: 98 1/2 INCHES (APPROX. 250CM) 1 CLOTH ROLL: 85 1/2 INCHES STAUBLI HEAD: YEAR 1985 MAX. HEALD FRAME CAP: 17 FRAMES LOOM #12 PU 85VSD 150KR D1 6 GROB HORGEN HEALD FRAMES 4 TECNO MATEX PREFEEDERS 1 SULZER RUTI WARP BEAM BEAM DIAM: 80CM BEAM LENGHT: 98 1/2 INCHES (APPROX. 250CM) 1 CLOTH ROLL: 85 1/2 INCHES STAUBLI HEAD: YEAR 1985 MAX. HEALD FRAME CAP: 17 FRAMES LOOM #13 PU 85VSD 120KR D1 6 GROB HORGEN HEALD FRAMES 4 TECNO MATEX PREFEEDERS 1 SULZER RUTI WARP BEAM BEAM DIAM: 80CM BEAM LENGHT: 97 INCHES (APPROX. 246CM) 1 CLOTH ROLL: 85 1/2 INCHES STAUBLI HEAD: YEAR 1981 MAX. HEALD FRAME CAP: 17 FRAMES LOOM #14 PU 85VSD 120KR D1 6 GROB HORGEN HEALD FRAMES 4 TECNO MATEX PREFEEDERS 1 SULZER RUTI WARP BEAM BEAM DIAM: 80CM BEAM LENGHT: 97 INCHES (APPROX. 246CM) 1 CLOTH ROLL: 85 1/2 INCHES STAUBLI HEAD: YEAR 1981 MAX. HEALD FRAME CAP: 17 FRAMES LOOM #15 PU 85VSD 120KR D1 6 GROB HORGEN HEALD FRAMES 4 SAVI TEC-B PREFEEDERS 1 SULZER RUTI WARP BEAM BEAM DIAM: 80CM BEAM LENGHT: 98 1/2 INCHES (APPROX. 250CM) 1 CLOTH ROLL: 85 1/2 INCHES STAUBLI HEAD: YEAR 1981 MAX. HEALD FRAME CAP: 17 FRAMES LOOM #16 PU 85VSD 120KR D1 6 GROB HORGEN HEALD FRAMES 4 TECNO MATEX PREFEEDERS 1 SULZER RUTI WARP BEAM BEAM DIAM: 80CM BEAM LENGHT: 97 INCHES (APPROX. 246CM) 1 CLOTH ROLL: 85 1/2 INCHES STAUBLI HEAD: YEAR 1981 MAX. HEALD FRAME CAP: 17 FRAMES LOOM #17 PU 85VSD 120KR D1 6 GROB HORGEN HEALD FRAMES 4 TECNO MATEX PREFEEDERS 1 SULZER RUTI WARP BEAM BEAM DIAM: 80CM BEAM LENGHT: 98 1/2 INCHES (APPROX. 250CM) 1 CLOTH ROLL: 85 1/2 INCHES STAUBLI HEAD: YEAR 1981 MAX. HEALD FRAME CAP: 17 FRAMES LOOM #18 PU 85VSD 120KR D1 6 GROB HORGEN HEALD FRAMES 1 SAVI TEC-B PREFEEDER 3 TECNO MATEX PREFEEDERS 1 SULZER RUTI WARP BEAM BEAM DIAM: 80CM BEAM LENGHT: 98 1/2 INCHES (APPROX. 250CM) 1 CLOTH ROLL: 85 1/2 INCHES STAUBLI HEAD: YEAR 1981 MAX. HEALD FRAME CAP: 17 FRAMES LOOM #19 PU 85VSD 150KR D1 6 GROB HORGEN HEALD FRAMES 4 TECNO MATEX PREFEEDERS 1 SULZER RUTI WARP BEAM BEAM DIAM: 80CM BEAM LENGHT: 98 1/2 INCHES (APPROX. 250CM) 1 CLOTH ROLL: 85 1/2 INCHES (217CM) STAUBLI HEAD: YEAR 1987 MAX. HEALD FRAME CAP: 17 FRAMES LOOM #20 PU 85VSD 150KR D1 6 GROB HORGEN HEALD FRAMES 3 TECNO MATEX PREFEEDERS 1 SULZER RUTI WARP BEAM BEAM DIAM: 80CM BEAM LENGHT: 97 INCHES (APPROX. 247CM) 1 CLOTH ROLL: 85 3/4 INCHES (218CM) STAUBLI HEAD: YEAR 1987 MAX. HEALD FRAME CAP: 17 FRAMES LOOM #21 PU 85VSD 150KR D1 6 GROB HORGEN HEALD FRAMES 2 TECNO MATEX PREFEEDERS 1 SULZER RUTI WARP BEAM BEAM DIAM: 80CM BEAM LENGHT: 98 1/2 INCHES (APPROX. 250CM) 1 CLOTH ROLL: 85 3/4 INCHES (218CM) STAUBLI HEAD: YEAR 1987 MAX. HEALD FRAME CAP: 17 FRAMES LOOM #22 PU 85VSD 150KR D1 14 GROB HORGEN HEALD FRAMES 4 TECNO MATEX PREFEEDERS 1 SULZER RUTI WARP BEAM BEAM DIAM: 80CM BEAM LENGHT: 97 1/2 INCHES (APPROX. 247CM) 1 CLOTH ROLL: 85 1/2 INCHES STAUBLI HEAD: YEAR 1987 MAX. HEALD FRAME CAP: 17 FRAMES LOOM #23 PU 85VSD 150KR D1 6 GROB HORGEN HEALD FRAMES 4 TECNO MATEX PREFEEDERS 1 SULZER RUTI WARP BEAM BEAM DIAM: 80CM BEAM LENGHT: 97 1/2 INCHES (APPROX. 247CM) 1 CLOTH ROLL: 85 3/4 INCHES (218CM) STAUBLI HEAD: YEAR 1987 MAX. HEALD FRAME CAP: 17 FRAMES LOOM #24 PU 85VSD 150KR D1 6 GROB HORGEN HEALD FRAMES 2 TECNO MATEX PREFEEDERS 1 SULZER RUTI WARP BEAM BEAM DIAM: 80CM BEAM LENGHT: 98 1/2 INCHES (APPROX. 250CM) 1 CLOTH ROLL: 85 1/2 INCHES STAUBLI HEAD: YEAR 1987 MAX. HEALD FRAME CAP: 17 FRAMES TOTAL QUANTITY: 18 EXTRA CLOTH ROLLS: 13 EXTRA WARP BEAMS: 1- A) 14 2- B) 16 3- C) 1 TOTAL: 31 EXTRA WARP BEAMS Learn More

TT-8282 BEAM WINDER OF BEAM DYEING MACHINE, WIDTH 3660mm, WITH PAD FOULARD 1. WINDER OF BEAM DYEING MACHINE IS SUITABLE FOR RAW MATERIALS OF FABRIC SPOOLS OR A-SHAPED FRAMES. 2. IT UNDERGOES WIDENING FOR DE-CREASING WRINKLES, LASER ALIGNMENT, WATER TANK IMMERSION, WATER REMOVAL BY ROLLING, TENSION CONTROL, AND THE WINDING IS DONE ON THE AXIAL WINDING DRUM OR THE DEDICATED EQUIPMENT OF THE A-SHAPED FRAME. 3. MAIN PARAMETERS: 4. MATERIAL: STAINLESS STEEL 304 5. WIDTH OF FABRIC: 3660mm QUANTITY: 1 SET Learn More

MACHINE FEATURES: - WITH NC SERVICE ROLLER, AUTOMATIC ADDING OIL DEVICE, BACKING YARN STORAGE DEVICE, DEVICE YARN NEEDLE, YARN COLLECTING PLAT AND AUTO STOP DEVICE. -THE MAIN MOTOR IS CONTROLLED BY INVERTER AND PLC. -THE CREEL IS CONTROLLED BY PNEUMATIC, AND ITS POSITION IS ACCURACY CONTROLLED BY PHOTOELECTRIC SENSOR AND THE PLC AUTOMATICALLY. -THE MAIN BRAKE ADEPTS PNEUMATIC BUTTERFLY BRAKE. THE BREAKING TRAY WITH MIDDLE UNOCCUPIED HAS A NICE HEAT-DISSIPATED FUNCTION. ON THE OTHER HAND, THE USING OF BREAK PINCER WITH AUTO-COMPENSATION AND THE HOOFED PIECE MAKES THE BUTTERFLY BRAKE STABLE AND LAST A LONG LIFE. -THE BRAKE OF POSITIVE ROLLER AND SPEED ROLLER CAN MAKE DIFFERENT BRAKE PRESSURES ACCORDING TO DIFFERENT SPEEDS (MORE THAN 200 M/MIN). THESE DIFFERENT PRESSURES, TOGETHER WITH THE MAIN BEAM BREAK, GUARANTEES THE YARN TENSION IN THE BREAKING TIME IS THE SAME AS THE TENSION UNDER THE CONSTANT SPEED. -WITH TOUCH SCREEN. ALL THE ELECTRICAL TROUBLES AND WRONG OPERATION INFORMATION ARE DISPLAYED ON THE SCREEN. THE PNEUMATIC PART, AORTIC, IS MADE IN TAIWAN. -THE POSITIVE ROLLER IS COVERED BY HIGH-HARDNESS COATING, SO THE SMOOTH SURFACE IMPROVES THE ABSORPTION TO THE YARN. THE AC HIGH-SPEED SERVO SYSTEM PROVIDES A POWER TO THE ABOVE ROLLER, MATCHING WITH THE PLC, BOTH OF WHICH SERVICE FOR THE MAIN WINDING SYSTEM, TO ENSURE THE CONSTANT TENSION OF YARN. -WITH REMOTE DEBUGGING TO MONITOR THE CURRENT WORKING CONDITIONS. CONSISTS OF: (1) COMPUTER CONTROLLED COPY WARPING MACHINE FOR 30”X42” INCH AND 21”X42” BEAM (2) ROTATION OPEN CREEL WITH 1400 POSITIONS AND KFD OIL HYDRAULIC TENSIONER (1) COMPUTER CONTROLLED COPY WARPING MACHINE FOR 30”X42” INCH AND 21”X42” BEAM TECHNICAL DATA: LINE SPEED 0 TO 1000M/MIN MAX. TENSION OF LINE 1000N BRAKE TORQUE 3200NM UP AND DOWN OF BEAM PNEUMATIC CONTROL TIGHT AND RELEASE OF BEAM PNEUMATIC CONTROL DIAMETER OF SPEED ROLLER Ø120mm POWER OF MAIN MOTOR 15KW CONTROL TYPE OF MAIN MOTOR INVERTER CONTROL MONITORING WAY IMMEDIATE MONITOR BY MICROCOMPUTER CONTROLLED TOUCH SCREEN CONTROL TYPE OF POSITIVE YARN-SEND ROLLER AC HIGH-SPEED SERVO CONTROL SYSTEM OF MITSUBISHI DIAMETER OF POSITIVE YARN-SEND ROLLER Ø100mm PRESSURE OF PNEUMATIC SOURCE 6 BAR MAIN PARTS： MAIN MOTOR SIEMENS OF GERMANGY HIGH-SPEED SERVO SYSTEM MITSUBISHI OF JAPAN CONVERTER EMERSON OF USA TEST COMPONENTS A AUTONICS OF SOUTH KOREA TEST COMPONENTS B KOYO OF JAPAN PNEUMATIC COMPONENTS AIRTAC OF TAIWAN PLC OMRON OF JAPAN TOUCH SCREEN MCGS OF BEIJING OPERATING COMPONENTS SCHNEIDER OF FRANCE TERMINAL COMPONENTS PHOENIXCONTACT OF GERMANGY BEARING NSK OF JAPAN (2) ROTATION OPEN CREEL WITH 1400 POSITIONS AND KFD OIL HYDRAULIC TENSIONER MAJOR PARTS: 1. MOTOR 2. ROLLER SPEED DETECTOR 3. CONTROL PANEL 4. REED 5. SIZING PARTS 6. LUBRICATING DEVICE 7. YARN STORAGE 8. TENSION ROLLER 9. STATIC ELIMINATOR 10. NEEDLES 11. YARN COLLECTING BOARD DELIVERY TIME: 37-45 DAYS Learn More

TT-5429 PATERNOSTER / BEAM STORAGE, WIDTH 2500mm, DIAMETER 800mm QUANTITY: 1 Learn More

REFERENCE NUMBER: M-5158 (1212CVPGXX11) L COMPLETE TERRY WEAVING PLANT 1 WEST POINT DIRECT WARPER WORKING WIDTH 1.8M, FLANGE DIAMETER BEAM OUTPUT 940 MM, PRESSURE ROLLER 1 WEST POINT V-CREEL, 504 ENDS, 504 SPARE ENDS, PITCH 400 MM, WP ELECTRO SENSE 1 WEST POINT DIRECT WARPER, WORKING WIDTH 1.8M, FLANGE DIAMETER BEAM OUTPUT 940 MM, PRESSURE ROLLER 1 WEST POINT V-CREEL, 640 ENDS, 640 SPARE ENDS, PITCH 450 MM, WP ELECTRO SENSE 1 WEST POINT SIZING UNIT, 10 POSITION CREEL, WORKING WIDTH 1.8M, DIAMETER 940 MM SINGLE SIZE BOX, ROLLER WIDTH 1.8 M, SINGLE SQUEEZING 10 DRYING CYLINDERS, TEFLON COATED, PARRAFIN WEST POINT HEAD STOCK, WORKING WIDTH 2.7 M, FLANGE 1250 MM 1 WEST POINT SIZING UNIT, 10 POSITION CREEL, WORKING WIDTH 1.8M, DIAMETER 940 MM SINGLE SIZE BOX, ROLLER WIDTH 1.8 M, SINGLE SQUEEZING 8 DRYING CYLINDERS, 7 TEFLON COATED, PARRAFIN WEST POINT HEAD STOCK, WORKING WIDTH 3.0 M, FLANGE 1250 MM 1 WEST POINT SIZING UNIT, 8 POSITION CREEL, WORKING WIDTH 1.8M, DIAMETER 940 MM SINGLE SIZE BOX, ROLLER WIDTH 1.8 M, SINGLE SQUEEZING 7 DRYING CYLINDERS, 6 TEFLON COATED, PARRAFIN WEST POINT HEAD STOCK, WORKING WIDTH 2.7 M, FLANGE 1250 MM 1 SIZE KITCHEN , 5 STAINLESS STEEL MIXING TANKS WITH HEATING 7 MOTOCONO REMAIN WINDERS, 4 POSITIONS EACH 1 WARP BEAM STORAGE, 6 ROWS, 4 LEVELS, 14 M LENGTH 3 SHELVES SINGLE SIDED, 2 SHELVES DOUBLE SIDED WITH HUBTEX WARP BEAM LIFTER, MODEL 20TS 62 SULZER TERRY PROJECTILE LOOMS WITH JACQUARD (8) MODEL P7100 B330 F4 EP J D1, YEAR 4X 1989, 2X 1990, 2X 1991 WORKING WIDTH 3,3 M / 130” (7) STAUBLI E-JACQUARD CX-870, YEAR 1998-2004, 2688 HOOKS, CONTROLLER JC-5 (1) STAUBLI E-JACQUARD CX-860, YEAR 1997, 2688 HOOKS, CONTROLLER JC-4 (M/C 1989) GROUND AND PILE WARP BEAM 940 MM DIAMETER (2) MODEL P7200 B330 F4 J Q D1, YEAR 1X 1991, 1X 1995 WORKING WIDTH 3,3 M / 130” STAUBLI E-JACQUARD CX-870, YEAR 2004, 2688 HOOKS, CONTROLLER JC-5 GROUND AND PILE WARP BEAM 940/1250 MM DIAMETER (6) MODEL P7100 B330 F4 J D1, YEAR 1X 1991, 1X 1992, 4X 1994 WORKING WIDTH 3,3 M / 130” (4) STAUBLI E-JACQUARD CX-860, YEAR 1994, 2688 HOOKS, CONTROLLER JC-4 (2) STAUBLI E-JACQUARD CX-870, YEAR 2004, 2688 HOOKS, CONTROLLER JC-5 (M/C 1990/91) GROUND AND PILE WARP BEAM 940 MM DIAMETER (4) MODEL P7250 B330 F4 J D1, YEAR 2X 2000, 2X 2001 WORKING WIDTH 3,3 M / 130” STAUBLI E-JACQUARD CX-870, YEAR 2X 2001, 2X 2004, 2688 HOOKS, CONTROLLER JC-5 GROUND AND PILE WARP BEAM 940/1250 MM DIAMETER (5) MODEL P7100 B390 F4 EP J D1, YEAR 1X 1991, 1X 1992, 2X 1994, 1X 1995 WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD CX-870, YEAR 2003/2004, 2688 HOOKS, CONTROLLER JC-5 GROUND AND PILE WARP BEAM 940 MM DIAMETER (1) MODEL P7100 B390 F4 EP J D1, YEAR 1992 WORKING WIDTH 3,9 M / 153” SCHLEICHER MECHANICAL JACQUARD 3-08, YEAR 1990, 896 HOOKS CAM MOTION, 6 LEVERS INSTALLED, 4 FRAMES GROUND AND PILE WARP BEAM 940 MM DIAMETER (4) MODEL P7100 B390 F4 EP J D1, YEAR 1X 1992, 3X 1994 WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD LX-1602, YEAR 2006/2008, 3072 HOOKS, CONTROLLER JC-6 GROUND AND PILE WARP BEAM 940 MM DIAMETER (6) MODEL P7100 B390 F4 EP J D1, YEAR 1X 1992, 4X 1993, 1X 1994 WORKING WIDTH 3,9 M / 153” STAUBLI MECHANICAL JACQUARD CR-520S, YEAR 1993/94, 1344 HOOKS GROUND AND PILE WARP BEAM 940 MM DIAMETER (1) MODEL P7100 B390 F4 EP J D1, YEAR 1994, WORKING WIDTH 3,9 M / 153” STAUBLI MECHANICAL JACQUARD CR-520, YEAR 1995, 1344 HOOKS GROUND AND PILE WARP BEAM 940 MM DIAMETER (2) MODEL P7100 B390 F4 EP J D1, YEAR 1995, WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD LX-1600, YEAR 2006, 3072 HOOKS, CONTROLLER JC-5 GROUND AND PILE WARP BEAM 940 MM DIAMETER (4) MODEL P7100 B390 F4 J D1, YEAR 1995 , WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD CX-860, YEAR 1996, 2688 HOOKS, CONTROLLER JC-4 GROUND AND PILE WARP BEAM 940 MM DIAMETER (1) MODEL P7100 B390 F4 J D2, YEAR 1995 , WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD CX-960, YEAR 1996, 3072 HOOKS, CONTROLLER JC-4 GROUND AND PILE WARP BEAM 940 MM DIAMETER (8) MODEL P7200 B390 F4 J Q D1, YEAR 6X 1996, 2X 1997, WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD CX-870, YEAR 1998, 2688 HOOKS, CONTROLLER JC-5 GROUND AND PILE WARP BEAM 940/1250 MM DIAMETER (8) MODEL P7250 B390 F4 J D1, YEAR 6X 1997, 2X 1998 , WORKING WIDTH 3,9 M / 153” (4) STAUBLI E-JACQUARD LX-1600, YEAR 2000, 3072 HOOKS, CONTROLLER JC-5 (M/C 1997) (4) STAUBLI E-JACQUARD CX-870, YEAR 2000/01, 2688 HOOKS, CONTROLLER JC-5 (M/C 1997/98) GROUND AND PILE WARP BEAM 940/1250 MM DIAMETER (1) MODEL P7250 B390 F4 J D2, YEAR 1999 , WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD LX-1600, YEAR 2002, 3072 HOOKS, CONTROLLER JC-5 GROUND AND PILE WARP BEAM 940/1250 MM DIAMETER (1) MODEL P7250 B390 F4 J D3, YEAR 1999, WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD LX-1600, YEAR 2002, 3072 HOOKS, CONTROLLER JC-5 GROUND AND PILE WARP BEAM 940/1250 MM DIAMETER ALL MACHINES WITH 4 COLORS, AVERAGE 3 WEFT FEEDERS (ROH CHRONO HS AND SIMILAR), MIN. 3 CENTRAL TUCK IN UNITS PER MACHINE, SIDE TUCK IN UNITS, USTER LOOM DATA E-JACQUARD M/C WITH ELECTRONICALLY CONTROLLED COLOR SELECTION (EXCEPT 8 MECHANICAL M/CS) SPLIT BEAM EXECUTION, 1.5 PILE BEAMS, 1.5 GROUND BEAMS ON-LOOM TAKE-UP, 1.5 CLOTH ROLLS, 4 WEFT FEEDERS, 4 DROP WIRE BARS APPROX. 9000 DROP WIRES AND 4500 HEDDLES, LOOMDATA APPROX. 80% PLATINES INSTALLED STARTES OR STAUBLI HARNESS, ONE LIETTY GANTRY FOR TWO MACHINES LOOM POWER 5 OR 6 KW, JACQUARD POWER 2 KW 5 TONELLO AT GARMENT WASHING AND BLEACHING MACHINES MODEL G510, YEAR: 1 X 2002, 2 X 2003, 1 X 2004, 1 X 2007, TEMPERATURE 98C , CAPACITY 500 KG.EACH, TONELLO CONTROLS DIRECT STEAM OPERATED, CURRENTLY ALL ARE CONNECTED TO A CENTRAL DOSING SYSTEM (BUT EACH HAS ITS OWN DOSING SYSTEM AND CAN WORK AS INDEPENDENT M/C) FULL DRUM (NOT DIVIDED), 4 WATER ENTRIES AND 2 DRAINING OPENINGS CAPABLE OF WASHING, BLEACHING AND WATER EXTRACTION, HEAVY DUTY (SUITABLE FOR JEANS) 1 TONELLO AT GARMENT WASHING AND BLEACHING MACHINES MODEL G1 50 HS, YEAR 2007, TEMPERATURE 98°C, CAPACITY 50 KG. TONELLO CONTROLS, DIRECT STEAM OPERATED, AIR PRESSURE 7 BAR, HYDRAULICS 3 BAR, STEAM 10 BAR, FULL DRUM (NOT DIVIDED), 4 WATER ENTRIES AND 2 DRAINING OPENINGS CAPABLE OF WASHING, BLEACHING AND WATER EXTRACTION, HEAVY DUTY (SUITABLE FOR JEANS) 2 TRIVENETA GARMENT DRYERS, TYPE E550 PV YEAR 2001 MODEL 550 P CAPACITY 500 KG. EACH, DRYING CYCLE TIME IS HALF OF THE TONELLO = EACH MACHINE CAN SERVE 2 TONELLO MACHINES - SEMI AUTOMATIC LOADING AND DISCHARGING, STEAM OPERATED ITEMIZED SALE IS POSSIBLE – AGAINST OFFERS AVAILABLE IMMEDIATELY – STOPPED ON MILL FLOOR Learn More

V-2005 WARPER AND CREEL FOR DENIM YARNS WITH 48 BEAMS; 1800mm WIDTH X 1400mm DIAMETER MAXIMUM WARPING SPEED: 1000 METERS PER MINUTE WARP DENSITY: 0.3 TO 0.65 G/cm3; BRAKE SYSTEM: PNEUMATIC-HYDRAULIC CLAMP-BRAKES ON GUIDE ROLLER, WARPING BEAM, PRESS ROLLER; BRAKING DISTANCE: ≤4M (AT SPEED OF 500 METERS PER MINUTE); LENGTH MEASURING: LENGTH MEASURING ON PRESSURE ROLLER WHEN WORKING, LENGTH MEASURING ON WARPING BEAM WHEN PRESS ROLLER BACKWARDS; LENGTH MEASURING ACCURACY: ±0.1%; PRESS METHOD: CYLINDER PUSHES PRESS ROLLER GIVING PARALLEL PRESSURE ALONG THE INCLINED LINEAR GUIDE, PNEUMATIC DISC OFFERS AUXILIARY DAMPING PRESSURE; EXPANSION REED TYPE: W SHAPE, MOVABLE UP AND DOWN, LEFT AND RIGHT; REED TRAVERSE RANGE: 0 TO 40mm ADJUSTABLE; REED TRAVERSE ADJUSTMENT: MANUALLY; REED TRAVERSE FREQUENCY: 24 CYCLES PER MINUTE; EXPANSION REED STRETCH METHOD: ELECTRICAL; REED CENTERING METHOD: ELECTRICAL; BEAM CLAMP: PNEUMATIC; PRESS ROLLER CENTERING: ELECTRICAL; WORKSTATION: TOUCH SCREEN, BUTTONS ON SAFETY BAR. QUANTITY: 1 SET SHIPPING NOTICE: 1 40FT CONTAINER FOR WARPER AND CREEL 1 40FT CONTAINER FOR 48 BEAMS TIME TO BUILD THE MACHINE: 100 DAYS Learn More

YY-1845 PET SINGLE BEAM SPUNBONDED NONWOVENS PRODUCTION LINE GENERAL DESCRIPTION: WIDTH OF PRODUCT: 3.2M; WEIGHT RANGE: 15 TO 170G/M2; PRODUCTION CAPACITY: 556KG/H (BASED ON PRODUCT WITH BASIS WEIGHT OF 50G/M2 OR ABOVE, AND WITH WIDTH OF 3.2M AND FABRIC DELIVERING SPEED OF 58M/MIN). THE DESIGNED ANNUAL CAPACITY IS 4000 TONS PET SPUNBONDED NONWOVEN FABRICS (OUTPUT CALCULATION IS BASED ON THE PRODUCT WITH BASIS WEIGHT OF 50G/M2 AND WITH WIDTH OF 3.2M AND 8000 WORKING HOURS ANNUALLY AND AT FABRIC CONVEYING SPEED OF 58M/MIN, AND THE EFFICIENCY OF 95%). PROCESS SPEED: 10M/MIN TO 150M/MIN; FIBER FINENESS: 1.0 TO 3.0 DPF; MACHINERY DIMENSIONS (L×W×H): 25M×18M×10.5M (FOR REFERENCE ONLY AND DEPENDS ON THE ACTUAL DESIGN). TOTAL INSTALLED POWER: 1492KW (ACTUAL POWER CONSUMPTION: APPROXIMATELY 746KW). Learn More

YY-2411 HIGH PRECISION BEAM CUTTING PRESSES-MANUAL STYLE WITH PCL SCREEN 220V, 60Hz, 3PHASE TOTAL QUANTITY: 2 Learn More

REFERENCE NUMBER: M-5185 (13135CDT12R) L COMEZ WARPER YEAR 1998 BEAMS 21X21 PERFECT FOR ELASTAM YARN WARPER BRAND: COMEZ YEAR: 1998 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-1188 (111118NDQ10U) ATOM FULL HEAD BEAM PRESS DIE CUTTER YEAR 1999 YEAR 1999 24x63 ATOM FULL HEAD BEAM PRESS MODEL S325 26 TON REBUILT IN 2008 IN OPERATION AVAILABLE IMMEDIATELY QUANTITY AVAILABLE: 1 Learn More