Search results for: 'extrusion*'

J-3004 FIBRILLATED RAFFIA TAPE EXTRUSION LINE – NEW, 120mm PP FIBRILLATED YARN EXTRUDER LINE MODEL: NOVASTAR-120 EXTRUSION LINE FOR PRODUCTION OF PP FIBRILLATED YARN RAW MATERIAL: PP GRANULE FINISHED PRODUCTS: NON-TWISTED TAPE YARN, FIBRILLATED YARN FOR TWINE RANGE OF PRODUCT: 10,000 TO 30,000 DENIER 10000 DENIER APPROXIMATELY 17 TO 19 YARN 16000 DENIER APPROXIMATELY 11 TO 12 YARN 22000 DENIER APPROXIMATELY 8 TO 9 YARN 28000 DENIER APPROXIMATELY 6 TO 7 YARN 32000 DENIER APPROXIMATELY 5 TO 6 YARN EXTRUSION THROUGHPUT: 300 KG PER HOUR EXTRUSION CAPACITY: 180 TO 250 KG PER HOUR (PRODUCT CAPACITY DEPEND ON FILAMENT SIZE) EXTRUDER SCREW DIAMETER: Ø 120mm T-DIE WIDTH: 1300mm TAKE-OFF ROLLER WIDTH: 1200mm TAKE-OFF LINE SPEED: 160 METERS PER MINUTE (MAXIMUM) OPERATION SIDE: RIGHT TO LEFT, OR LEFT TO RIGHT Learn More

TT-2274 FIBRE EXTRUSION TECHNOLOGIES LIMITED FET-100 SERIES PILOT MELT SPINNING SYSTEM, YEAR 2020 FIBRE EXTRUSION TECHNOLOGIES LIMITED FET-100 SERIES PILOT MELT SPINNING SYSTEM FOR CONTINUOUS FILAMENT YARN APPLICATIONS (MULTIFILAMENT) YEAR 2020 AVAILABLE FOR IMMEDIATE SALE QUANTITY: 1 Learn More

TT-1624 HAN YOUNG EXTRUSION LAMINATION, WIDTH 1500mm, YEAR 2001 MANUFACTURER: HAN YOUNG MODEL: EXTRUSION LAMINATION YEAR: 2001 WIDTH: 1500mm Learn More

TT-1112 EXTRUSION LAMINATOR, UP TO 2200mm, ONE SIDED LAMINATING MACHINE (480 VOLTS, 3-PHASE, 60Hz) MAIN PROCESS AND PARAMETERS TECHNOLOGICAL PROCESS MAIN UNWINDING, RECTIFYING, EXTRUDING, COMPOUND CUTTING AND REWINDING. MAIN TECHNICAL PARAMETERS 1. RAW MATERIAL: SUITABLE FOR COATING RESIN LDPE, PP AND OTHER COATING BASE MATERIAL. 2. AUXILIARY BASE MATERIAL: PAPER, NON-WOVEN FABRIC, ALUMINUM FILM, WOVEN CLOTH AND OTHER APPLICABLE MATERIALS MECHANICAL SPEED: 60 TO 150 METERS/MINUTE (ACTUAL SPEED DEPENDS ON FILM MATERIAL, FILM WIDTH AND THICKNESS, ETC.) EFFECTIVE WIDTH OF LAMINATING: 1200 TO 2000mm LAMINATING THICKNESS: 0.008 TO 0.080mm LAMINATING THICKNESS ERROR ±5% TENSION SETTING RANGE: 20 TO 200 KG/FULL WIDTH CONSTANT TENSION MAXIMUM EXTRUSION: 200 KG/HOUR INNER DIAMETER OF BASE MATERIAL ROLL CORE: 76mm MACHINE POWER: 100 KW ACTUAL OPERATING POWER IS 50 KW TO 60 KW CONTROL TYPE OF COMPOUND SPEED AND LAMINATING THICKNESS: PLC COMPUTER, FULLY AUTOMATIC ELECTRICAL CONTROL LAMINATING WITH EMBOSSING: SINGLE-LAYER Learn More

YY-2230 CONVERTING MACHINES, EXTRUSION LAMINATION STATUS: DISMANTLED Learn More

YY-2693 COATING/LAMINATION UNITS (1 ROTOGRAVURE PRIMER, 1 EXTRUSION COATING UNIT, 1EXTRUSION LAMINATION UNIT), WIDTH 1500mm, YEAR 2001 QUANTITY: 1 Learn More

TT-6070 BANDERA EXTRUSION LINE FOR 3D MONOFILAMENT, 45mm EXTRUSION LINE FOR 3D MONOFILAMENT BRAND: BANDERA MODEL: 45mm 25 L/D CATEGORY: EXTRUSION LINES SCREW DIAMETER: 45mm TYPE: SINGLE SCREW STATE: GOOD QUANTITY: 1 Learn More

REFERENCE NUMBER: M-4788 (1111KYWJXX10) L ER-WE-PA EXTRUSION COATER LAMINATOR YEAR 1985 WEB WIDTH 1575mm ER-WE-PA EXTRUSION COATER LAMINATOR, 1985 YEAR WEB WIDTH: 1575 mm (62 IN) L/D(S): 30:1 DRIVE SYSTEM: DC DRIVE SPEED: 366 MPM (1200 FPM) EXTRUDER(S): ER-WE-PA PRIME COATER: NONE SIZE(S): 4-1/2" 3-1/2" PRIMARY UNWIND: NONE SECONDARY UNWIND: NONE REWIND: NONE DRYER TYPE: NONE USED ER-WE-PA EXTRUSION COATER LAMINATOR STATION EQUIPPED WITH EXTRUSION COATER WITH 27" DIAMETER X 72" FACE CHILL ROLL 7.5" DIAMETER RUBBER COVERED NIP ROLL, 12" DIAMETER CHROME BACKING ROLL, 14" DIAMETER SECONDARY CHILL ROLL, RAZOR EDGE TRIM SECTION 72" EDI/WELEX AUTOFLEX SHEET EXTRUSION DIE DIE WITH EXTERNAL DECKLING 4.5" AND 3.5" ER-WE-PA EXTRUDERS WITH 30:1 L/D; EXTRUDERS MOUNTED ON XYZ CARRIAGE. MACHINE DOES NOT INCLUDE AN UNWIND OR REWIND. QUANTITY AVAILABLE: 1 Learn More

TT-4880 DAVIS STANDARD SHEET CO-EXTRUSION LINE, 375 KW, WIDTH 2290mm DAVIS STANDARD SHEET CO-EXTRUSION LINE WIDTH 2290mm TYPE SELLING QUANTITY: 1 Learn More

TT-3999 KUHNE 5-LAYER BLOWN FILM CO-EXTRUSION LINE, WIDTH 2000mm, YEAR 2012 KUHNE 5-LAYER BLOWN FILM CO-EXTRUSION LINE YEAR 2012 TYPE SELLING QUANTITY: 1 Learn More