Search results for: 'flange machin'

TT-6902 SUCKER MULLER HACOBA SIZING MACHINE, YEAR 2002, EXIT WIDTH 4600mm, BEAM FLANGE DIAMETER 1270mm 1. SUCKER MULLER HACOBA SIZING MACHINE 2. YEAR 2002 3. MACHINE INLET FOR DIRECT WARPING BEAMS FROM METALLIC FRAMEWORK MODEL AM-24 4. 24 POSITIONS 5. FLANGE MAX DIAMETER 1000mm 6. DIRECT BEAMS WIDTH 2000mm 7. PNEUMATIC BLOCK BRAKE QUANTITY: 1 Learn More

TT-5852 MASCOTT PLUS 25-30 CROSSLAPPER AND MONO_1AB_27-3000 NEEDLE LOOM Learn More

REFERENCE NUMBER: C-4085

GREENVILLE CONTINUOS INDIGO & SULPHUR AND MERCERIZING DYEING LINE, YEAR RECONDITIONED 2004

 

GREENVILLE CONTINUOS INDIGO & SULPHUR AND MERCERIZING DYEING LINE

IN 20 ROPES

YEAR RECONDITIONED: 2004

AND THEN IT STOPPED ON 2009

STILL ON MILL FLOOR

 

A-BALL WARPING MACHINES:

OFFER 001

RED-CHATWOOD BALL WARPER

MODEL: WC 480

YEAR: 1991

MAX. DIAMETER: 1200mm

TRAVERSE MAX.1200mm

MAX. WEIGHT: 816 KGS

ELECTRONIC CONTROL

2 ROLLERS WITH SENSOR

FOR AUTOMATIC REGULATION

AND CONSTANT AND PERIPHERIC WINDING SPEED

AND TENSION YARN FROM CREEL

QUANTITY: 1

 

OFFER 002

REED-CHATWOOD V CREEL

MODEL: LVC/A

YEAR: 1991

WITH ELECTRONIC TENSION REGULATION

504 POSITIONS WORKING

504 POSITIONS STORAGE

GAUGE 340mm X 340mm

80-WOOD LOG

QUANTITY: 2

 

OFFER 003

INDIGO & SULPHUR AND MERCERIZING ROPES DYEING LINE:

YEAR: 1972

YEAR RECONDITIONED: 2004

GREENVILLE

ROPES RANGE 20 ROPES

THIS ROPE RANGE HAS THE FLEXIBILITY TO PRODUCE 11 DIFFERENT DYEING PROCESS

QUANTITY: 1

 

COMPLETE OF:

OFFER 004

CREEL FOR 20 BALLS WARP POSITIONS

QUANTITY: 1

 

OFFER 005

ROPES YARN INTRODUCTION

AND DRAGGING CALENDER

QUANTITY: 1

 

OFFER 006

TANK1 - SODAING, IMBIBITION AND PURGING TANK

WITH LIQUID CIRCULATION

AND FILTERING GROUP

WITH SQEEZING PADDER FOR 10000 KGS

IN UPPER POSITION

QUANTITY: 1

 

OFFER 007

STEAMER

WITH VERTICAL PASSAGES OF FABRIC BY 6 UPPER

AND UNDER 5 CYLINDERS

CAP.L.M.40

QUANTITY: 1

 

OFFER 008

TANK2- FIXING, WASHING, INDIGO DYEING TANK

WITH SQEEZING PADDER FOR 10000 KGS FOR EACH TANK

QUANTITY: 1

 

OFFER 009

8 LONGITUDINAL FINNED CYLINDERS FOR OXIDIZATION OF INDIGO-DYED YARNS

FABRIC CAPACITY 28 LINEAR METERS

QUANTITY: 1 SET

 

OFFER 010

TANK3 - NEUTRALIZATION, WASHING AND INDIGO DYEING

WITH SQEEZING PADDER 10000 KGS

IRON AISI 316 FOR EACH TANK

QUANTITY: 1

 

OFFER 011

8 LONGITUDINAL FINNED CYLINDERS FOR OXIDIZATION OF INDIGO-DYED YARNS

FABRIC CAPACITY 28 LINEAR METERS

QUANTITY: 1 SET

 

OFFER 012

TANK4-TANK5

WASHING AND INDIGO DYEING TANK

WITH SQEEZING PADDER 10000 KGS FOR EACH TANK

QUANTITY: 2

 

OFFER 013

8 LONGITUDINAL FINNED CYLINDERS FOR OXIDIZATION OF INDIGO-DYED YARNS

FABRIC CAPACITY 28 LINEAR METERS

QUANTITY: 1 SET

 

OFFER 014

TANK6-TANK7 - WASHING AND INDIGO DYEING

BLACK SULPHUR DYEING

WITH SQEEZING PADDER 10000 KGS

FOR EACH TANK

QUANTITY: 2

 

OFFER 015

8 LONGITUDINAL FINNED CYLINDERS FOR OXIDIZATION OF INDIGO-DYED YARNS

QUANTITY: 1 SET

 

OFFER 016

TANK8 - INDIGO SPECIAL COLORS DYEING

BLACK SULPHUR DYEING TANK

WITH LIQUID CIRCOLATION

AND FILTERING GROUP

WITH SQEEZING PADDER 10000 KGS FOR EACH TANK

QUANTITY: 1

 

OFFER 017

8 LONGITUDINAL FINNED CYLINDERS FOR OXIDIZATION OF INDIGO-DYED YARNS

FABRIC CAPACITY 28 LINEAR METERS

IN UPPER POSITION

QUANTITY: 1 SET

 

OFFER 018

STEAMER

WITH VERTICAL PASSAGES OF FABRIC BY 6 UPPER

AND UNDER 5 CYLINDERS

CAP.L.M.40

QUANTITY: 1

 

OFFER 019

INDIGO CIRCULATION TANK

COMPLETED WITH FILTERS, HEATING COILS AND

AUTOMATIC DOSER FOR HYDROSULPHITE CAPACIOUS FOR 200 LT.S

WITH DOSING PUMP FOR AUTOMATIC SODA DOSING

ELECTRONIC EQUIPMENT FOR CONTROL OF PH

AND REDOX PARAMETERS

QUANTITY: 1

 

OFFER 020

TANK9-TANK10 - INDIGO DYEING

BLACK SULPHUR DYEING

WITH SQEEZING PADDER 10000 KGS

FOR EACH TANK

QUANTITY: 2

 

OFFER 021

8 LONGITUDINAL FINNED CYLINDERS FOR OXIDIZATION OF INDIGO-DYED YARNS

QUANTITY: 1 SET

 

OFFER 022

TANK11-TANK12-TANK13 - HOT WASHING (AND/ OR INDIGO DYEING)

TANK WITH SQEEZING PADDER 10000 KGS

WITH INOX STEEL HOOD AND ASPIRATION FAN

ALL INSIDE AND OUTSIDE TANKS AND CYLINDERS ARE IN INOX IRON

ALL THE TANKS ARE THERMOREGULATED

EACH TANK IS COMANDED BY MOTOR POWER INVERTER

QUANTITY: 3

 

OFFER 023

RAMALLUMIN DRYING CYLINDERS

YEAR: 1972

YEAR RECONDITIONED: 2002

PART OF TEFLONED CYLINDERS

ALL CYLINDERS STEAM HEATING THERMOREGULATED EXIT

20 COILER SYSTEM FOR CANS

DIAMETER: 1200mm X H.800mm

FOR DYEING ROPES

PANEL ELECTRONIC COMPUTERIZED

AND ELECTRIC POWER FOR ALL FUNCTIONS OF THE LINE

ELECTRONIC CONTROL OF THE TENSION OF THE YARN

WITH ELONGATIONS IN %

BETWEEN THE DIFFERENT POINT

MOISTURE CONTROL

QUANTITY: 36

 

OFFER 024

CANS STORAGE

DIAMETER: 1200mm X H.800mm

INCLUDING-CABIES-PIPING

QUANTITY: 60

 

OFFER 025

INOX IRON CONTROL PANEL FOR THE DYEING PROCESS

QUANTITY: 1

 

OFFER 026

INOX IRON CONTROL PANEL FOR THE SPEED REGULATION

QUANTITY: 1

 

OFFER 027

INOX IRON CONTROL PANEL FOR THE COLORS KITCHEN

COLORS AUTOMATIC ELECTRONIC KITCHEN

QUANTITY: 1

 

OFFER 028

COMPOSED WITH:

CAPACIOUS FOR DARK INDIGO SALVAGE FOR 3500 LTS EACH

QUANTITY: 6

 

OFFER 029

CAPACIOUS FOR DARK INDIGO SALVAGE FOR 10000 LTS EACH

ALL THE CAPACIOUSES ARE IN INOX IRON

AND ARE PROVIDED WITH THE ELECTRIC AGITATOR

PART OF THEM ARE THERMOREGULATED

QUANTITY: 6

 

OFFER 030

DIRECT WARPER MACHINES FOR REBEAMING:

REED-CHATWOOD CHAIN BEAMERS DIRECT WARPERS

MODEL: SBB

YEAR: 1991

MAX. SPEED 410 M/MIN

BEAM FLANGE

DIAMETER: 1000mm

BEAM MAX. WEIGHT: 907 KGS

FOR REBEAMING FROM CANS

WITH ROPES DYEING

TO REED-CHATWOOD CHAIN BEAMERS

WITH AUTOMATIC ELECTRONIC PREFEEDER ACCUMULATOR

WITH 2 POSITIVE ROLLERS

FOR ELECTRONIOC CONTROL OF CONSTANT TENSION

AND PERIPHERIC SPEED ROPES

QUANTITY: 1

 

OFFER 031

NUOVA FORMIA CHAIN BEAMERS DIRECT WARPERS

YEAR: 1987

MAX. SPEED: 410 M/MIN

BEAM FLANGE DIAMETER: 1000mm

BEAM MAX. WEIGHT: 907 KGS

FOR REBEAMING FROM CANS

WITH ROPES DYEING

TO NUOVA FORMIA CHAIN BEAMERS

WITH AUTOMATIC ELECTRONIC

PREFEEDER ACCUMULATOR

WITH 2 POSITIVE ROLLERS

FOR ELECTRONIOC

CONTROL OF CONSTANT TENSION

AND PERIPHERIC SPEED ROPES

QUANTITY: 5

 

OFFER 032

WARP BEAMS FLANGE DIAMETER: 1000mm

INSIDE DISTANCE FLANGE TO FLANGE: 1600mm

FOR EXIT CHAIN BEAMERS AND FEEDING CREEL ROTAL

SIZING MACHINE

SPARE PARTS EXISTING IN THE COMPANY

QUANTITY: 100

 

OFFER 033

SIZING MACHINE

ROTAL SIZING MACHINE

YEAR: 1990

QUANTITY: 1

 

COMPOSED WITH:

OFFER 034

FEEDING CREEL FOR 16 POSITIONS FOR BEAMS FLANGE

DIAMETER: 1000mm X INSIDE

DISTANCE FLANGE TO FLANGE 1600mm

QUANTITY: 1

 

OFFER 035

SIZE TANK WITH DOUBLE GROUP OF DOUBLE SQEEZING

3 CYLINDERS EACH SET GROUP

HIGH PRESSURE TYPE

YEAR: 1999

COMPLETE

QUANTITY: 2

 

OFFER 036

DRYER-GROUP MODEL

OF 16 DRYING INOX CYLINDERS

DIAMETER: 800mm

PART OF THEM TEFLONED

WITH SIDE COVERINGS AND ASPIRATOR

QUANTITY: 1

 

OFFER 037

AUTOMATIC BEAMING MACHINE FOR BEAMS

WIDTH: 2600mm

FOR FLANGE DIAMETER: 1200mm

COMPLETED WITH ELECTRONIC CONTROLS, ETC

QUANTITY: 1

 

OFFER 038

SIZING KITCHEN

COMPOSED OF INOX

1 TANK FOR SIZE PREPARATION

CAPACITY: 1000LTS

AND CAPACIOUS FOR COOKING AUTOCLAVE OF 1000 LTS

AND OF 2 STORAGE RESERVE SIZING CAPACIOUS FOR 1500 LTS

COMPLETED WITH ELECTRIC PANEL

WITH THERMOREGULATION, ETC

QUANTITY: 1

 

QUANTITY: 1 LINE

Learn More

TT-6598 MTU 20V4000L64FNER TR OPEN TYPE NATURAL GAS GENSET, 2.5 MW, 50 Hz, 1500 RPM, YEAR 2024 1. MTU 20V4000L64FNER TR OPEN TYPE NATURAL GAS GENSET 2. 1 UNIT 400 V 3. 2 UNITS 6.3 KV Learn More

TT-6597 MTU OPEN TYPE NATURAL GAS GENERATORS, 1.5 MW, 50Hz EXCELLENT FULL DESCRIPTION OF A GENERATOR QUANTITY: 10 Learn More

TT-7680 SIEMENS SST 400 CONDENSING STEAM TURBINE, YEAR 2011, 50/60Hz, 30 MW SIEMENS SST 400 YEAR 2011 TYPE: SST 400 CONDENSING STEAM TURBINE WITH FOUR BLEEDS AND ONE EXTRACTION TURBOSE OUTPUT: (AT GENERATOR TERMINALS) NORMAL 30 MW MAXIMAL 31.88 MW MINIMAL 4.5 MW QUANTITY: 4 Learn More

REFERENCE NUMBER: M-5158 (1212CVPGXX11) L COMPLETE TERRY WEAVING PLANT 1 WEST POINT DIRECT WARPER WORKING WIDTH 1.8M, FLANGE DIAMETER BEAM OUTPUT 940 MM, PRESSURE ROLLER 1 WEST POINT V-CREEL, 504 ENDS, 504 SPARE ENDS, PITCH 400 MM, WP ELECTRO SENSE 1 WEST POINT DIRECT WARPER, WORKING WIDTH 1.8M, FLANGE DIAMETER BEAM OUTPUT 940 MM, PRESSURE ROLLER 1 WEST POINT V-CREEL, 640 ENDS, 640 SPARE ENDS, PITCH 450 MM, WP ELECTRO SENSE 1 WEST POINT SIZING UNIT, 10 POSITION CREEL, WORKING WIDTH 1.8M, DIAMETER 940 MM SINGLE SIZE BOX, ROLLER WIDTH 1.8 M, SINGLE SQUEEZING 10 DRYING CYLINDERS, TEFLON COATED, PARRAFIN WEST POINT HEAD STOCK, WORKING WIDTH 2.7 M, FLANGE 1250 MM 1 WEST POINT SIZING UNIT, 10 POSITION CREEL, WORKING WIDTH 1.8M, DIAMETER 940 MM SINGLE SIZE BOX, ROLLER WIDTH 1.8 M, SINGLE SQUEEZING 8 DRYING CYLINDERS, 7 TEFLON COATED, PARRAFIN WEST POINT HEAD STOCK, WORKING WIDTH 3.0 M, FLANGE 1250 MM 1 WEST POINT SIZING UNIT, 8 POSITION CREEL, WORKING WIDTH 1.8M, DIAMETER 940 MM SINGLE SIZE BOX, ROLLER WIDTH 1.8 M, SINGLE SQUEEZING 7 DRYING CYLINDERS, 6 TEFLON COATED, PARRAFIN WEST POINT HEAD STOCK, WORKING WIDTH 2.7 M, FLANGE 1250 MM 1 SIZE KITCHEN , 5 STAINLESS STEEL MIXING TANKS WITH HEATING 7 MOTOCONO REMAIN WINDERS, 4 POSITIONS EACH 1 WARP BEAM STORAGE, 6 ROWS, 4 LEVELS, 14 M LENGTH 3 SHELVES SINGLE SIDED, 2 SHELVES DOUBLE SIDED WITH HUBTEX WARP BEAM LIFTER, MODEL 20TS 62 SULZER TERRY PROJECTILE LOOMS WITH JACQUARD (8) MODEL P7100 B330 F4 EP J D1, YEAR 4X 1989, 2X 1990, 2X 1991 WORKING WIDTH 3,3 M / 130” (7) STAUBLI E-JACQUARD CX-870, YEAR 1998-2004, 2688 HOOKS, CONTROLLER JC-5 (1) STAUBLI E-JACQUARD CX-860, YEAR 1997, 2688 HOOKS, CONTROLLER JC-4 (M/C 1989) GROUND AND PILE WARP BEAM 940 MM DIAMETER (2) MODEL P7200 B330 F4 J Q D1, YEAR 1X 1991, 1X 1995 WORKING WIDTH 3,3 M / 130” STAUBLI E-JACQUARD CX-870, YEAR 2004, 2688 HOOKS, CONTROLLER JC-5 GROUND AND PILE WARP BEAM 940/1250 MM DIAMETER (6) MODEL P7100 B330 F4 J D1, YEAR 1X 1991, 1X 1992, 4X 1994 WORKING WIDTH 3,3 M / 130” (4) STAUBLI E-JACQUARD CX-860, YEAR 1994, 2688 HOOKS, CONTROLLER JC-4 (2) STAUBLI E-JACQUARD CX-870, YEAR 2004, 2688 HOOKS, CONTROLLER JC-5 (M/C 1990/91) GROUND AND PILE WARP BEAM 940 MM DIAMETER (4) MODEL P7250 B330 F4 J D1, YEAR 2X 2000, 2X 2001 WORKING WIDTH 3,3 M / 130” STAUBLI E-JACQUARD CX-870, YEAR 2X 2001, 2X 2004, 2688 HOOKS, CONTROLLER JC-5 GROUND AND PILE WARP BEAM 940/1250 MM DIAMETER (5) MODEL P7100 B390 F4 EP J D1, YEAR 1X 1991, 1X 1992, 2X 1994, 1X 1995 WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD CX-870, YEAR 2003/2004, 2688 HOOKS, CONTROLLER JC-5 GROUND AND PILE WARP BEAM 940 MM DIAMETER (1) MODEL P7100 B390 F4 EP J D1, YEAR 1992 WORKING WIDTH 3,9 M / 153” SCHLEICHER MECHANICAL JACQUARD 3-08, YEAR 1990, 896 HOOKS CAM MOTION, 6 LEVERS INSTALLED, 4 FRAMES GROUND AND PILE WARP BEAM 940 MM DIAMETER (4) MODEL P7100 B390 F4 EP J D1, YEAR 1X 1992, 3X 1994 WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD LX-1602, YEAR 2006/2008, 3072 HOOKS, CONTROLLER JC-6 GROUND AND PILE WARP BEAM 940 MM DIAMETER (6) MODEL P7100 B390 F4 EP J D1, YEAR 1X 1992, 4X 1993, 1X 1994 WORKING WIDTH 3,9 M / 153” STAUBLI MECHANICAL JACQUARD CR-520S, YEAR 1993/94, 1344 HOOKS GROUND AND PILE WARP BEAM 940 MM DIAMETER (1) MODEL P7100 B390 F4 EP J D1, YEAR 1994, WORKING WIDTH 3,9 M / 153” STAUBLI MECHANICAL JACQUARD CR-520, YEAR 1995, 1344 HOOKS GROUND AND PILE WARP BEAM 940 MM DIAMETER (2) MODEL P7100 B390 F4 EP J D1, YEAR 1995, WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD LX-1600, YEAR 2006, 3072 HOOKS, CONTROLLER JC-5 GROUND AND PILE WARP BEAM 940 MM DIAMETER (4) MODEL P7100 B390 F4 J D1, YEAR 1995 , WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD CX-860, YEAR 1996, 2688 HOOKS, CONTROLLER JC-4 GROUND AND PILE WARP BEAM 940 MM DIAMETER (1) MODEL P7100 B390 F4 J D2, YEAR 1995 , WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD CX-960, YEAR 1996, 3072 HOOKS, CONTROLLER JC-4 GROUND AND PILE WARP BEAM 940 MM DIAMETER (8) MODEL P7200 B390 F4 J Q D1, YEAR 6X 1996, 2X 1997, WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD CX-870, YEAR 1998, 2688 HOOKS, CONTROLLER JC-5 GROUND AND PILE WARP BEAM 940/1250 MM DIAMETER (8) MODEL P7250 B390 F4 J D1, YEAR 6X 1997, 2X 1998 , WORKING WIDTH 3,9 M / 153” (4) STAUBLI E-JACQUARD LX-1600, YEAR 2000, 3072 HOOKS, CONTROLLER JC-5 (M/C 1997) (4) STAUBLI E-JACQUARD CX-870, YEAR 2000/01, 2688 HOOKS, CONTROLLER JC-5 (M/C 1997/98) GROUND AND PILE WARP BEAM 940/1250 MM DIAMETER (1) MODEL P7250 B390 F4 J D2, YEAR 1999 , WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD LX-1600, YEAR 2002, 3072 HOOKS, CONTROLLER JC-5 GROUND AND PILE WARP BEAM 940/1250 MM DIAMETER (1) MODEL P7250 B390 F4 J D3, YEAR 1999, WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD LX-1600, YEAR 2002, 3072 HOOKS, CONTROLLER JC-5 GROUND AND PILE WARP BEAM 940/1250 MM DIAMETER ALL MACHINES WITH 4 COLORS, AVERAGE 3 WEFT FEEDERS (ROH CHRONO HS AND SIMILAR), MIN. 3 CENTRAL TUCK IN UNITS PER MACHINE, SIDE TUCK IN UNITS, USTER LOOM DATA E-JACQUARD M/C WITH ELECTRONICALLY CONTROLLED COLOR SELECTION (EXCEPT 8 MECHANICAL M/CS) SPLIT BEAM EXECUTION, 1.5 PILE BEAMS, 1.5 GROUND BEAMS ON-LOOM TAKE-UP, 1.5 CLOTH ROLLS, 4 WEFT FEEDERS, 4 DROP WIRE BARS APPROX. 9000 DROP WIRES AND 4500 HEDDLES, LOOMDATA APPROX. 80% PLATINES INSTALLED STARTES OR STAUBLI HARNESS, ONE LIETTY GANTRY FOR TWO MACHINES LOOM POWER 5 OR 6 KW, JACQUARD POWER 2 KW 5 TONELLO AT GARMENT WASHING AND BLEACHING MACHINES MODEL G510, YEAR: 1 X 2002, 2 X 2003, 1 X 2004, 1 X 2007, TEMPERATURE 98C , CAPACITY 500 KG.EACH, TONELLO CONTROLS DIRECT STEAM OPERATED, CURRENTLY ALL ARE CONNECTED TO A CENTRAL DOSING SYSTEM (BUT EACH HAS ITS OWN DOSING SYSTEM AND CAN WORK AS INDEPENDENT M/C) FULL DRUM (NOT DIVIDED), 4 WATER ENTRIES AND 2 DRAINING OPENINGS CAPABLE OF WASHING, BLEACHING AND WATER EXTRACTION, HEAVY DUTY (SUITABLE FOR JEANS) 1 TONELLO AT GARMENT WASHING AND BLEACHING MACHINES MODEL G1 50 HS, YEAR 2007, TEMPERATURE 98°C, CAPACITY 50 KG. TONELLO CONTROLS, DIRECT STEAM OPERATED, AIR PRESSURE 7 BAR, HYDRAULICS 3 BAR, STEAM 10 BAR, FULL DRUM (NOT DIVIDED), 4 WATER ENTRIES AND 2 DRAINING OPENINGS CAPABLE OF WASHING, BLEACHING AND WATER EXTRACTION, HEAVY DUTY (SUITABLE FOR JEANS) 2 TRIVENETA GARMENT DRYERS, TYPE E550 PV YEAR 2001 MODEL 550 P CAPACITY 500 KG. EACH, DRYING CYCLE TIME IS HALF OF THE TONELLO = EACH MACHINE CAN SERVE 2 TONELLO MACHINES - SEMI AUTOMATIC LOADING AND DISCHARGING, STEAM OPERATED ITEMIZED SALE IS POSSIBLE – AGAINST OFFERS AVAILABLE IMMEDIATELY – STOPPED ON MILL FLOOR Learn More

LIST NUMBER: L-2987
SIZING MACHINES FOR SALE

REFERENCE NUMBER: P-6749
ROTAL
SIZING MACHINE
YEAR: 1990
QUANTITY: 1

REFERENCE NUMBER: P-7175
BENNINGER ZELL
SIZING
YEAR: 1994
HEAD STOCK WORKING WIDTH: 2800mm
QUANTITY: 1

REFERENCE NUMBER: P-5168
SUCKER
MODEL: MOENUS Z 14
SIZZING MACHINE
WIDTH: 3400mm

BENNINGER
TYPE: BEN DIRECT
WARPER
QUANTITY: 1

REFERENCE NUMBER: P-5818
SUCKER MULLER
SIZING 2 SIZING BOX WIH BENNINGER DIRECT WARPER
YEAR: 1989
WIDTH: 130 INCHES
QUANTITY: 1

REFERENCE NUMBER: P-5586
BENNINGER-ZELL
WARP SIZING LINE
YEAR: 1994
WORKING WIDTH: 3400mm
QUANTITY: 1

REFERENCE NUMBER: C-1229
SUCKER MULLER SIZING MACHINE
MODEL ZG6
YEAR 1984
WORK WIDTH 3000mm
SCHLAFHORST DIRECT WARPING MACHINE MODEL MZD
YEAR 1984
WORK WIDTH 1600mm
QUANTITY: 1

REFERENCE NUMBER: R-1913
SUCKER SIZING
WORKING WIDTH: 3300mm
QUANTITY: 1

REFERENCE NUMBER: R-3193
BENNINGER SIZING MACHINE
TYPE: BEN-SIZE TEC A13
YEAR: 1994
HEADSTOCK WIDTH: 3400mm
QUANTITY: 1

REFERENCE NUMBER: P-3562
WEST POINT
MODEL: 861
SLASHER
YEAR: 1993
HEADWAY WIDTH: 126 INCHES
QUANTITY: 1

Learn More

J-4564 5 KILO SAMPLE SOFT FLOW MACHINE CAPACITY 5 TO 10 KILO MATERIAL CONSTRUCTION [HTHP-VESSEL] 316 L 5 mm THICKNESS PUMP SS 316 – MOTOR HP 3 HP – 1500 RPM DIAMETER OF VESSEL 1150 mm TOTAL LENTGH 2200 mm TOTAL WIDTH 3900 mm MAXIMUM WORKING HIGH TEMP. 135° C MAXIMUM WORKING PRESSURE 3 KG/ cm2 TUBE 1 TUBE SIZE DIAMETER 200 mm NOZZLE SIZE [OVERFLOW FIX ] DIAMETER 190 mm X 168 mm INSIDE WINCH (HP) 1 HP X 1 FOR FULLY AUTO COLOR TANK INJECTION PUMP 1 HP/3000 RPM UNLOADING WINCH 1 HP /200RPM GEAR BOX COLOR TANK (LITERS) 20 LITERS X 2 PIECES FILL (AUTO) DIAMETER 1.5” X 2 DRAIN [ AUTO] DIAMETER 1.5 ” X 2 OVER FLOW [AUTO] DIAMETER 1.5” X 1 HEAT [ AUTO] DIAMETER 1” COOL [ AUTO] DIAMETER 1” LIQUOR RATIO 1: 5 TO 1 : 7 [ DEPEND ON FABRIC] QUANTITY: 1 Learn More

LIST NUMBER: L-3004
SIZING MACHINES FOR SALE

REFERENCE NUMBER: C-5212
BENNINGER SIZING MACHINE
TYPE BEN SIZETEC
YOM: 2004
WORKING WIDTH: 2400mm
BENINGER DIRECT WARPER
TYPE BEN DIRECT
YOM: 2005
WORKING WIDTH: 2400mm
QUANTITY: 1

REFERENCE NUMBER: P-4682
BENNINGER
SIZING MACHINE
YEAR: 2002
WIDTH: 2800mm
QUANTITY: 1 SET

REFERENCE NUMBER: P-7130
SUCKER MULLER
TYPE: HACOBA
SIZING MACHINE
YEAR: 1999
WORKING WIDTH: 1800mm
QUANTITY: 1

REFERENCE NUMBER: C-3650
OFFER 001
SUCKER MOENUS Z 14 SIZING MACHINE
WIDTH: 3400mm
YEAR: 2006
QUANTITY: 1
OFFER 002
BENNINGER BEN DIRECT WARPING MACHINE
YEAR: 2005
WIDTH: 2200mm
QUANTITY: 1

REFERENCE NUMBER: A-1197 (1212GHBXX11) A
MAKE: BENNINGER
MODEL: BEN SIZETEC
YEAR: 1998
Width - 2000mm
QUANTITY: 2

REFERENCE NUMBER: P-6712
SUCKER MULLER
SIZING MACHINE
YEAR: 2003
HEADSTOCK WIDTH: 3600mm
QUANTITY: 1

REFERENCE NUMBER: M-5040
(1 SET) BENNINGER SIZING MACHINES (SLASHERS), YEAR 2000

REFERENCE NUMBER: R-3746
ITEM 001
KARL MAYER​ DIRECT WARPING ​MACHINE
YEAR: 20​06​
WIDTH: 2​0​00mm
​QUANTITY: 1 SET
ITEM 002
KARL MAYER SIZING MACHINE
YEAR: 2011
QUANTITY: 1 SET

Learn More