Search results for: '1"'`--".(((.(,'(''

REFERENCE NUMBER: G-2226 NEW FOAM SHREDDER MODEL: 201 DIMENSIONS: 530 L x 530 W x 1300mm H NET WEIGHT: 80KG CAPACITY: 30KG/HOUR (66LBS/HR) SHRED SIZE: 3 TO 20mm POWER: 4KW VOLTAGE:220V/60HZ/3 PHASE INCLUDING 3 DIFFERENT SCREENS QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER G-3179 FOAM MATTRESS COVERING MACHINE MODEL: 303 DIMENSIONS: 2500 X 1350 X 1540MM POWER: 3KW NET WEIGHT: 500KG CAPACITY: 20SECONDS/PCS MATTRESS WIDTH: 750-2000MM MATTRESS THICKNESS: 150-300MM(MINIMUM IS: 15CM, MAXIMUM IS: 30CM) QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-3480 CNC FOAM CUTTER - SINGLE BLADE (NEW): MODEL: 1030 DIMENSIONS: 5980mm X 4750mm X 3020mm TABLE SIZE: 3000m X 2000mm HANDLING SIZE: 3000mm X 2000mm X 1200mm SPEED OF CUTTER: 0.5 TO 5 METERS PER MINUTE PRECISION: 0.5mm WEIGHT: 3000kg POWER: 7KW BLADE THICKNESS: 0.6mm BLADE HEIGHT: 3mm 14 TEETH PER INCH MOTOR: 2.2 kw MAXIMUM FOAM LENGTH: 3 METERS MAXIMUM FOAM WIDTH: 2 METERS MAXIMUM FOAM HEIGHT: 1.2 METERS QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-5061 FOAM SHREDDER (NEW) MODEL: 206 SHRED SIZE: 3 TO 50mm CAPACITY: 350 TO 400 kg/H NET WEIGHT: 1000kg POWER: 28.9kw DIMENSIONS: 3000 x 1200 x 1100mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-3236 QUILTED FOAM WASTE REPROCESSING MACHINE (NEW) THIS MACHINE IS SUITABLE FOR FOAM WASTE REPROCESSING OR FOAM RECYCLING. THE MACHINE'S CUTTING TOOLS ARE IMPORTED FROM GERMANY. THE MACHINE CAN CUT THE FOAM INTO REGULAR PIECES AND WITHOUT PRODUCING WASTE POWDER AND CAN ALSO CUT QUILTED FOAM FABRIC WASTE; FOR EXAMPLE MATTRESS TICKING WITH FIBERFILL AND NONWOVEN-BACKING. ORDINARILY QUILTED FABRIC WASTE CANNOT BE REUSED BUT WITH OUR QUILTED FABRIC WASTE AND FOAM CUTTING MACHINE, THE MANUFACTURER CAN RECLAIM THIS WASTE. BY CUTTING THE QUILTED FABRIC WASTE IT IS TRANSFORMED INTO LITTLE PIECES, AND IT CAN BE USED AS FILLING MATERIAL FOR PILLOWS, CUSHIONS, ETC. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5304

QUILTED FABRIC WASTE & FOAM CUTTING MACHINE

 

QUILTED FABRIC WASTE & FOAM CUTTING MACHINE

ADDITIONAL FAN FEEDING MACHINE MODEL 503

WITH 2 SERIES CUTTERS

WORKING WIDTH: 500mm

DIMENSIONS (LxWxH): 2100mm x 1140mm x 1420mm

CUTTING SIZE (WIDTH): 8mm

CUTTING SIZE (LENGTH – ADJUSTABLE): 6mm TO 60mm

POSSIBLE THICKNESS: ≤ 60mm

CAPACITY: 250 TO 300 KG PER HOUR

POWER: 10.2 KW

WEIGHT: 1,000 KG

 

QUANTITY: 1 SET

Learn More

REFERENCE NUMBER: M-5305

QUILTED FABRIC WASTE & FOAM CUTTING MACHINE

 

QUILTED FABRIC WASTE & FOAM CUTTING MACHINE

ADDITIONAL FAN FEEDING MACHINE MODEL 503

WITH 3 SERIES CUTTERS

WORKING WIDTH: 500mm

DIMENSIONS (LxWxH): 2850mm x 1240mm x 1270mm

CUTTING SIZE (WIDTH): 8mm

POSSIBLE THICKNESS: ≤ 60mm

CAPACITY:           250 TO 300 KG PER HOUR (CUTTING FOAM WASTE)

125 TO 160 KG PER HOUR (CUTTING QUILTED FABRIC WASTE)

POWER: 14.2 KW

WEIGHT: 1,300 KG

 

QUANTITY: 1 SET

Learn More

REFERENCE NUMBER: K-5243 (YOU MUST LOOK AT THE VIDEO, IT’S AMAZING) AUTOMATIC TRIMMING MACHINE FOR FOAM BLOCKS OR FOAM MATTRESSES, FOUR SIDES DESCRIPTION: PU SLABS CUT FROM FOAM BLOCK BY HORIZONTAL CUTTING UNDERGO PERIMETRICAL STRETCHING, (SOMETIMES A FEW CENTIMETERS STRETCHING). IN ORDER TO ACHIEVE SATISFACTORY SIZES (±1MM EACH SIDE) THE REMOVING OF IRREGULAR EDGES IS REQUIRED. THIS MACHINE TRIMS FOAM SLABS AND ALSO COUPLED SLABS. IT CAN BE PLACED AT THE END OF THE MATTRESS GLUING PLANT (MANUAL OR AUTOMATIC) OR BEYOND THE HORIZONTAL CUTTING MACHINE. THE COUPLED FOAM SHEETS ARE NOT ALIGNED AND NEED TO BE TRIMMED. OFTEN THE COUPLED MATTRESSES ARE TRIMMED ONE BY ONE ALONG THE FOUR SIDES WITH A MANUAL VERTICAL CUTTING MACHINE WASTING A LARGE AMOUNT OF TIME. THIS MACHINE AUTOMATICALLY TRIMS THE FOUR SIDES OF FOAM MATTRESSES WITHOUT ANY HANDLING; THAT MEANS AN ACCURATE TRIM AND SHORT PROCESSING TIME. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-8444 PUNCHING MACHINE MODEL FST 11 MACHINE AVAILABLE FOR AUTOMATIC DRILLING IN SHEETS OF PU FOAM, MEMORY FOAM, LATEX, EVA, NEOPRENE. WITH 20mm THICKNESS UP 2 DRILLINGS PER SECOND ARE PERFORMED; E.G.: ONE MOULD FOR 2mm DIAM. HOLES AND 50mm WHEEL BASE OF PUNCH, 7mm X 3.5 CROSSED HOLE PITCH: THE MACHINE WILL PERFORM NO 2310 HOLES EACH DRILLING CYCLE WITH 4620 HOLES PER SECOND IN TOTAL. THAT MEANS THE MACHINE CAN DRILL A FOAM SHEET DIM. 1000X1100mm EACH 20 SECONDS WITH 92400 HOLES IN TOTAL. TWO DRILLING TYPES ARE POSSIBLE: CONTINUOUS DRILLING “A-PERFORM” (NO DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS –SEE TAB. 31A); CONTINUOUS DRILLING “B-PERFORM” (WITH FIXED DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS). THE DISTANCE CAN BE MODIFIED BY OPERATOR). UP TO 150 20mm-THICKNESS MATTRESSES CAN BE PRODUCED IN ONE HOUR; BY INCREASING THE THICKNESS THE PRODUCTION WILL REDUCE. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-8444-A PUNCHING MACHINE MODEL FST 11 FOR LATEX MACHINE AVAILABLE FOR AUTOMATIC DRILLING IN SHEETS OF PU FOAM, MEMORY FOAM, LATEX, EVA, NEOPRENE. WITH 20mm THICKNESS UP 2 DRILLINGS PER SECOND ARE PERFORMED; E.G.: ONE MOULD FOR 2mm DIAM. HOLES AND 50mm WHEEL BASE OF PUNCH, 7mm X 3.5 CROSSED HOLE PITCH: THE MACHINE WILL PERFORM NO 2310 HOLES EACH DRILLING CYCLE WITH 4620 HOLES PER SECOND IN TOTAL. THAT MEANS THE MACHINE CAN DRILL A FOAM SHEET DIM. 1000X1100mm EACH 20 SECONDS WITH 92400 HOLES IN TOTAL. TWO DRILLING TYPES ARE POSSIBLE: CONTINUOUS DRILLING “A-PERFORM” (NO DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS –SEE TAB. 31A); CONTINUOUS DRILLING “B-PERFORM” (WITH FIXED DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS). THE DISTANCE CAN BE MODIFIED BY OPERATOR). UP TO 150 20mm-THICKNESS MATTRESSES CAN BE PRODUCED IN ONE HOUR; BY INCREASING THE THICKNESS THE PRODUCTION WILL REDUCE. QUANTITY AVAILABLE: 1 Learn More