Search results for: 'reference number -v-2'

REFERENCE NUMBER: F-1228 EPS MOLDING PRODUCTION LINE FOR BOX/CONTAINER/TRAY WITH THREE MOLDS (NEW) CONSIST OF: 1. EPS BATCH PRE-EXPANDER TYPE SJ1100 2. AUTOMATIC SHAPE MOLDING MACHINE WITH VACUUM SZ172 3. EPS MOULD FOR SZ172 MOLDING MACHINE 4. AUXILIARY EQUIPMENT QUANTITY AVAILABLE: 1 Learn More

CONSISTING OF: 1) COMPUTERIZED AUTOMATIC FILLING MACHINE, WHICH INCLUDES: STAINLESS STEEL MAIN FRAME PLC TOUCH SCREEN WEIGHING SCALE WEIGHING SENSOR QUANTITATIVE BARREL AIR AMPLIFIER FEATHER FILLING NOZZLE FOOT PEDAL SWITCH RELAY AIR BLOWER FEATHER PIPES 2) INCLUDES: STAINLESS STEEL FRAME INNER CONTAINER FILTER SCREEN SPEED-ADJUSTABLE BEATER FEATHER SUCKER AIR NOZZLE AND VALVES 3. AIR COMPRESSOR (SELF-PREPARED) Learn More

REFERENCE NUMBER: L-2533 
MODEL F-70

SIZES AVAILABLE:
1300 X 1000mm
1700 X 1300mm
2500 X 1600mm
3000 X 1600mm

QUANTITY: 1

 

Learn More

J-4483 EDGE SWEETS 60-88 PVT HORIZONTAL FOAM CUTTING MACHINE MAKE: EDGE SWEETS MODEL: 60-88 PVT YEAR: 2005 90 INCH WIDE BLADE GUIDE QUANTITY: 1 Learn More

REFERENCE NUMBER: L-2532
MODEL: 180
1000 TO 2000mm WIDTH

Learn More

H-1226 ALBRECHT BAUMER CNC CUTTING MACHINE YEAR 2006 - HORIZONTAL – 2600 X 2200 CUTTING AREA

MAKE: ALBERT BAUMER
MODEL: OFS 222
YEAR 2006
WINDOWS XP OPERATING SYSTEM
DIMENSION OF CUTTING AREA: 2600mm X 2200mm X 1250mm
MOVING MIDDLE GUIDE OF THE KNIFE
TYPE OF CUTTING: OSCILLATING (HORIZONTAL)
THE MACHINE CAN CUT IN A VERY PRECISE AREA FOR VERY SMALL DIAMETERS/SHAPES

VERY GOOD WORKING CONDITION
VERY FAST CUTTING SPEED
CAN BE SEEN RUNNING AND TESTED

QUANTITY: 1

Learn More

T-8260 ALBRECHT BAUMER IS-M, 40 METERS PER MINUTE, CUT HEIGHT 1300mm, YEAR 1987 MAKE: ALBRECHT BAUMER MODEL: IS-M SPEED: 0 TO 40 METERS PER MINUTE CUTTING HEIGHT: 1300mm KNIFE MEASUREMENTS: 10 x 0.45 x 10350mm POWER SUPPLY: 380 VOLTS, 3-PHASE, 50 Hz POWER REQUIREMENT: 4 KW YEAR: 1987 RIGHT TABLE: 2435mm BUN WIDTH (RIGHT TABLE): 2200mm BUN LENGTH: 2580mm LEFT TABLE: 2435mm BUN WIDTH (LEFT TABLE): 2200mm BUN LENGTH: 2580mm) QUANTITY: 1 Learn More

REFERENCE NUMBER: K-5243 (YOU MUST LOOK AT THE VIDEO, IT’S AMAZING) AUTOMATIC TRIMMING MACHINE FOR FOAM BLOCKS OR FOAM MATTRESSES, FOUR SIDES DESCRIPTION: PU SLABS CUT FROM FOAM BLOCK BY HORIZONTAL CUTTING UNDERGO PERIMETRICAL STRETCHING, (SOMETIMES A FEW CENTIMETERS STRETCHING). IN ORDER TO ACHIEVE SATISFACTORY SIZES (±1MM EACH SIDE) THE REMOVING OF IRREGULAR EDGES IS REQUIRED. THIS MACHINE TRIMS FOAM SLABS AND ALSO COUPLED SLABS. IT CAN BE PLACED AT THE END OF THE MATTRESS GLUING PLANT (MANUAL OR AUTOMATIC) OR BEYOND THE HORIZONTAL CUTTING MACHINE. THE COUPLED FOAM SHEETS ARE NOT ALIGNED AND NEED TO BE TRIMMED. OFTEN THE COUPLED MATTRESSES ARE TRIMMED ONE BY ONE ALONG THE FOUR SIDES WITH A MANUAL VERTICAL CUTTING MACHINE WASTING A LARGE AMOUNT OF TIME. THIS MACHINE AUTOMATICALLY TRIMS THE FOUR SIDES OF FOAM MATTRESSES WITHOUT ANY HANDLING; THAT MEANS AN ACCURATE TRIM AND SHORT PROCESSING TIME. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-8444 PUNCHING MACHINE MODEL FST 11 MACHINE AVAILABLE FOR AUTOMATIC DRILLING IN SHEETS OF PU FOAM, MEMORY FOAM, LATEX, EVA, NEOPRENE. WITH 20mm THICKNESS UP 2 DRILLINGS PER SECOND ARE PERFORMED; E.G.: ONE MOULD FOR 2mm DIAM. HOLES AND 50mm WHEEL BASE OF PUNCH, 7mm X 3.5 CROSSED HOLE PITCH: THE MACHINE WILL PERFORM NO 2310 HOLES EACH DRILLING CYCLE WITH 4620 HOLES PER SECOND IN TOTAL. THAT MEANS THE MACHINE CAN DRILL A FOAM SHEET DIM. 1000X1100mm EACH 20 SECONDS WITH 92400 HOLES IN TOTAL. TWO DRILLING TYPES ARE POSSIBLE: CONTINUOUS DRILLING “A-PERFORM” (NO DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS –SEE TAB. 31A); CONTINUOUS DRILLING “B-PERFORM” (WITH FIXED DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS). THE DISTANCE CAN BE MODIFIED BY OPERATOR). UP TO 150 20mm-THICKNESS MATTRESSES CAN BE PRODUCED IN ONE HOUR; BY INCREASING THE THICKNESS THE PRODUCTION WILL REDUCE. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-8444-A PUNCHING MACHINE MODEL FST 11 FOR LATEX MACHINE AVAILABLE FOR AUTOMATIC DRILLING IN SHEETS OF PU FOAM, MEMORY FOAM, LATEX, EVA, NEOPRENE. WITH 20mm THICKNESS UP 2 DRILLINGS PER SECOND ARE PERFORMED; E.G.: ONE MOULD FOR 2mm DIAM. HOLES AND 50mm WHEEL BASE OF PUNCH, 7mm X 3.5 CROSSED HOLE PITCH: THE MACHINE WILL PERFORM NO 2310 HOLES EACH DRILLING CYCLE WITH 4620 HOLES PER SECOND IN TOTAL. THAT MEANS THE MACHINE CAN DRILL A FOAM SHEET DIM. 1000X1100mm EACH 20 SECONDS WITH 92400 HOLES IN TOTAL. TWO DRILLING TYPES ARE POSSIBLE: CONTINUOUS DRILLING “A-PERFORM” (NO DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS –SEE TAB. 31A); CONTINUOUS DRILLING “B-PERFORM” (WITH FIXED DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS). THE DISTANCE CAN BE MODIFIED BY OPERATOR). UP TO 150 20mm-THICKNESS MATTRESSES CAN BE PRODUCED IN ONE HOUR; BY INCREASING THE THICKNESS THE PRODUCTION WILL REDUCE. QUANTITY AVAILABLE: 1 Learn More