Search results for: 'Automatic 4 s'

C-4006 ROSENTHAL AUTOMATIC SLITTING MACHINE E2880R, WIDTH 80”

ROSENTHAL
AUTOMATIC SLITTING MACHINE
MODEL: E2880R
WIDTH: 80”
ROLL DIAMETER: 28”

QUANTITY: 1

Learn More

REFERENCE NUMBER: L-4579 
BALL DIAMETER: 40 TO 300mm
POWER: 3.7 KW
DIMENSIONS: 1800mm LONG X 900mm WIDE X 2000mm TALL 

Learn More

REFERENCE NUMBER: L-2590 
POLYETHYLENE FOAM SHEET PRODUCTION LINE
MODEL 120-EPE 1100 TO 2000mm THICKNESS 8mm

Learn More

REFERENCE NUMBER: G-1606 SPECIALTY FOAM FORM MACHINE FOR BIKER PADS, OFFICE CHAIRS, PILLOWS, ETC. FORM-PROFILE-CUTTING MACHINE SC11 S TECHNICAL DATA: WORKING CUTTING WIDTH: 1100mm WORKING CUTTING LENGTH: 1200mm VERTICAL ADJUSTMENT OF THE BLADE FROM TABLE: 0/195mm VERTICAL STROKE OF THE PRESS-CONVEYOR: 0/195mm MAXIMUM HEIGHT OF THE FOAM TO BE WORKED: 220mm MAXIMUM DIMENSION OF THE MOULD: 1100 X 1200mm TABLE SPEED: 5/17 M/MIN POWER: 6 KW TENSION: 400 V APPROXIMATE WEIGHT: 1200 KGS QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-0017 AUTOMATIC VACUUM FOAMING BATCH MACHINE AUTOMATIC VACUUM FOAMING BATCH MACHINE, USES BATCHING TECHNOLOGY, FOAMING IN VACUUM CONDITION. IT IS COMPOSED OF STORAGE TANKS, BATCHING, MIXING, VACUUM, MOULD, AND COMPUTERIZED CONTROLLING SYSTEMS. USES NUMERICAL CONTROL DURING THE WHOLE PRODUCTION. IT IS USED FOR MAKING ALL KINDS OF FOAM. ADVANTAGE: *USING THE SAME PPH OF WATER, FOAMING DENSITY WILL BE LOWER: ≤30% * REDUCES THE CHEMICAL CONSUMPTION, AND SAVES ON THE FOAMING COST: ≤20% * SUCTION AND FILTRATE THE FOAMING AIR. * MONITOR THE WHOLE FOAMING BY WIRED TELEVISION. * WITH NUMERICAL CONTROL WITH ACCURATE AND CONVENIENT MEASURING DURING THE WHOLE PRODUCTION. EASY AND STABLE TO OPERATE THE MACHINE. OUTPUT 1 BLOCK / 12MIN CHEMICALS 8 GROUPS MIXER 220 KGS MOULD SIZE 2200（L）X 1800（W）X 1300 (H) mm 2200（L）X 1500（W）X 1300 (H) mm LIFTING PLATFORM SPEED ≤3M/MIN ( AUTOMATIC REGULATION ) MAX SUCTION 0.05MPA POWER 42KW QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-5243 (YOU MUST LOOK AT THE VIDEO, IT’S AMAZING) AUTOMATIC TRIMMING MACHINE FOR FOAM BLOCKS OR FOAM MATTRESSES, FOUR SIDES DESCRIPTION: PU SLABS CUT FROM FOAM BLOCK BY HORIZONTAL CUTTING UNDERGO PERIMETRICAL STRETCHING, (SOMETIMES A FEW CENTIMETERS STRETCHING). IN ORDER TO ACHIEVE SATISFACTORY SIZES (±1MM EACH SIDE) THE REMOVING OF IRREGULAR EDGES IS REQUIRED. THIS MACHINE TRIMS FOAM SLABS AND ALSO COUPLED SLABS. IT CAN BE PLACED AT THE END OF THE MATTRESS GLUING PLANT (MANUAL OR AUTOMATIC) OR BEYOND THE HORIZONTAL CUTTING MACHINE. THE COUPLED FOAM SHEETS ARE NOT ALIGNED AND NEED TO BE TRIMMED. OFTEN THE COUPLED MATTRESSES ARE TRIMMED ONE BY ONE ALONG THE FOUR SIDES WITH A MANUAL VERTICAL CUTTING MACHINE WASTING A LARGE AMOUNT OF TIME. THIS MACHINE AUTOMATICALLY TRIMS THE FOUR SIDES OF FOAM MATTRESSES WITHOUT ANY HANDLING; THAT MEANS AN ACCURATE TRIM AND SHORT PROCESSING TIME. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-8444 PUNCHING MACHINE MODEL FST 11 MACHINE AVAILABLE FOR AUTOMATIC DRILLING IN SHEETS OF PU FOAM, MEMORY FOAM, LATEX, EVA, NEOPRENE. WITH 20mm THICKNESS UP 2 DRILLINGS PER SECOND ARE PERFORMED; E.G.: ONE MOULD FOR 2mm DIAM. HOLES AND 50mm WHEEL BASE OF PUNCH, 7mm X 3.5 CROSSED HOLE PITCH: THE MACHINE WILL PERFORM NO 2310 HOLES EACH DRILLING CYCLE WITH 4620 HOLES PER SECOND IN TOTAL. THAT MEANS THE MACHINE CAN DRILL A FOAM SHEET DIM. 1000X1100mm EACH 20 SECONDS WITH 92400 HOLES IN TOTAL. TWO DRILLING TYPES ARE POSSIBLE: CONTINUOUS DRILLING “A-PERFORM” (NO DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS –SEE TAB. 31A); CONTINUOUS DRILLING “B-PERFORM” (WITH FIXED DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS). THE DISTANCE CAN BE MODIFIED BY OPERATOR). UP TO 150 20mm-THICKNESS MATTRESSES CAN BE PRODUCED IN ONE HOUR; BY INCREASING THE THICKNESS THE PRODUCTION WILL REDUCE. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-8444-A PUNCHING MACHINE MODEL FST 11 FOR LATEX MACHINE AVAILABLE FOR AUTOMATIC DRILLING IN SHEETS OF PU FOAM, MEMORY FOAM, LATEX, EVA, NEOPRENE. WITH 20mm THICKNESS UP 2 DRILLINGS PER SECOND ARE PERFORMED; E.G.: ONE MOULD FOR 2mm DIAM. HOLES AND 50mm WHEEL BASE OF PUNCH, 7mm X 3.5 CROSSED HOLE PITCH: THE MACHINE WILL PERFORM NO 2310 HOLES EACH DRILLING CYCLE WITH 4620 HOLES PER SECOND IN TOTAL. THAT MEANS THE MACHINE CAN DRILL A FOAM SHEET DIM. 1000X1100mm EACH 20 SECONDS WITH 92400 HOLES IN TOTAL. TWO DRILLING TYPES ARE POSSIBLE: CONTINUOUS DRILLING “A-PERFORM” (NO DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS –SEE TAB. 31A); CONTINUOUS DRILLING “B-PERFORM” (WITH FIXED DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS). THE DISTANCE CAN BE MODIFIED BY OPERATOR). UP TO 150 20mm-THICKNESS MATTRESSES CAN BE PRODUCED IN ONE HOUR; BY INCREASING THE THICKNESS THE PRODUCTION WILL REDUCE. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-1386 VERTICAL AUTOMATIC FOAMCUTTING MACHINE MODE BF 22 A TECHNICAL DATA: WORKING TABLE ON THE RIGHT OF BLADE 2200mm (86.6") WORKING TABLE ON THE LEFT OF BLADE 2200mm (78.7") WORKING CUTTING LENGTH 2400mm WORKING CUTTING HEIGHT 1300mm (51") QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: A-1317 (02025GHB01UX) A FEMCO 4A6 HORIZONTAL FOAM SAW WITH VACUUM TABLE MODEL: 4A6 TYPE: AUTOMATIC OPERATED MOVING TABLE CUT THICKNESS: 0.030” TO 10” CUT WIDTH & LENGTH: 88”W x 125”L TABLE OVERALL DIMENSIONS: 88”W x 125”L x 31”H BLADE: .75”WIDE x .035”THICK BLADE SPEED: 2077 FPM MACHINE FUNCTION: INDUSTRIAL PLC DATA ENTRY/DISPLAY: 8 TFT GRINDING: AUTOMATIC QUANTITY AVAILABLE: 1 Learn More