Search results for: 'Machine op'

TT-8579 FABRIC BEAM DYEING MACHINE, WIDTH 1500mm 1. FABRIC BEAM DYEING WINDER MACHINE 2. FABRIC TYPE WOVEN TYRICOT OR SATIN FABRIC 3. FABRIC WIDTH 1500mm 4. BEAM WIDTH 2000mm (MAX.) Learn More

TT-7522 BENNINGER INDIGO DYEING, SIZING AND WARPING MACHINE, WIDTH 2000mm, YEAR 2007 1. BENNINGER INDIGO DYEING AND SIZING MACHINE 2. YEAR: 2007 3. BRAND: BENNINGER 4. INDIGO DYEING AND SIZING MACHINE - 14 BOXES (DYE AND WASH) 5. 2 SIZING BOXES 6. 25 TO 35 M/MIN (82 TO 115 FT/MIN) 7. 2000mm (78.7 IN) WIDTH 8. PLATE DIAMETER: 1400mm (55.1 IN) 9. CYLINDER DIAMETER: 456mm (17.95 IN) 10. MECHANISMS: ENTRY SCRAY 11. WASH BOX 1, 2, 3 12. OXIDATION ZONE 13. DYEING BOXES 1-7 14. VAPORIZER 15. WASH BOX 1, 2, 3, SIZING A & B 16. DRUM DRYER, EXIT Learn More

TT-7524 SUCKER MULLER HACOBA INDIGO DYEING AND SIZING MACHINE, WIDTH 2000mm, YEAR 2003 1. SUCKER MULLER HACOBA INDIGO DYEING AND SIZING MACHINE 2. YEAR: 2003 3. BRAND: SUCKER MULLER HACOBA Learn More

REFERENCE NUMBER: M-3994

CONE DYEING MACHINE MASTER BM 300 400KG YEAR 1999

 

CONE DYEING MACHINE

MASTER BM 300, 400 KG, RACK WITH 43 ​​BARS.

MAX OPERATING PRESSURE MAIN BODY: 5

MAXIMUM OPERATING TEMPERATURE OF MAIN BODY:204C°

MAX OPERATING PRESSURE COIL :16

MAXIMUM OPERATING TEMPERATURE OF SERPENTINE:204C°

CAPACITY OF MAIN BODY :4085 LITERS

CAPACITY 65 LITERS SERPENTINE

YEAR 1999

Learn More

REFERENCE NUMBER: M-3993

CONE DYEING MACHINE MASTER BM 100 HS 125K YEAR 2001 -125 KGS

 

CONE DYEING MACHINE

MASTER BM 100 HS

125K

RACK WITH 12 BARS

MAX OPERATING PRESSURE MAIN BODY: 5

MAXIMUM OPERATING TEMPERATURE OF MAIN BODY: 158°C.

MAX OPERATING PRESSURE COIL: 16

MAXIMUM OPERATING TEMPERATURE OF SERPENTINE: 204°C

CAPACITY OF MAIN BODY: 1260 LITERS

CAPACITY OF SERPENTINE: 25 LITERS

YEAR: 2001

Learn More

REFERENCE NUMBER: M-4863 (1111HCMTXX10) L THIES TRD-III JET DYEING MACHINE YEAR 2013 THIES TRD III JET DYEING MACHINE BOUGHT NEW IN APRIL 2013 USED APPROXIMATELY 15 TIMES 2 TUBES, BUT YOU CAN CLOSE ONE TUBE AND RUN ONE TUBE IF SMALLER BATCH IS NEEDED 150 KGS PER PORT , TOTAL FOR THE MACHINE 300 TO 330 KGS ONE STOCK TANK TWO SIDE TANKS ORGATEX SOFTWARE, YOU CAN PROGRAM THE MACHINE FROM YOUR COMPUTER AND NETWORK THE MACHINE TO THIS COMPUTER AND TRANSFER FILES FROM THE COMPUTER TO THE MACHINE AND VICE VERSA QUANTITY AVAILABLE: 1 Learn More

TT-7525 SUCKER MULLER HACOBA DYEING, SIZING AND WARPING DENIM, WIDTH 1600mm TO 1800mm, YEAR 2003 1. SUCKER MULLER HACOBA DYEING, SIZING AND WARPING DENIM 2. YEAR: 2003 3. BRAND: SUCKER MULLER HACOBA 4. DIRECT WARPER 5. 442 POSITIONS 6. 800 RPM 7. WIDTH 1600mm TO 1800mm 8. PLATE DIAMETER: 1400mm (55.1 IN) 9. CYLINDER DIAMETER: 456mm (17.95 IN) 10. MECHANISMS: ENTRY, EXIT Learn More

REFERENCE NUMBER: A-0004 (1111TAREA10) A THIES JET DYEING MACHINE SOFT TRD SIII 140/2 YEAR 2013 YEAR: 2013 MANUFACTURER: THIES MODEL: SOFT TRD SIII 140/2 CAPACITY: 150 KG PER PORT X 2 PORT WE RAN MAYBE 10 BATCHES IN THIS MACHINE, IT’S LIKE MINT CONDITION. COMES WITH ORGATEX BASIC SOFTWARE (YOU CAN PROGRAM THE MACHINE FROM YOUR COMPUTER AND NETWORK THE MACHINE TO THIS COMPUTER AND TRANSFER FILES FROM COMPUTER TO THE MACHINE OR VIS VERSA) STOCK TANK 2 SIDE TANK NOMINAL CAPACITY: APPROX. 150 KG PER TUBE TOTAL CAPACITY: APPROX. 300 KG TOTAL LIQUOR RATIO: MIN. 1 : 5 OPERATING TEMPERATURE: 140 DEG. C SPECIAL ADJUSTABLE NOZZLE (SQUARED CROSS SECTION) MACHINE WAS BOUGHT NEW FROM THIES VOLTAGE IS 460 QUANTITY AVAILABLE: 1 Learn More

TT-8282 BEAM WINDER OF BEAM DYEING MACHINE, WIDTH 3660mm, WITH PAD FOULARD 1. WINDER OF BEAM DYEING MACHINE IS SUITABLE FOR RAW MATERIALS OF FABRIC SPOOLS OR A-SHAPED FRAMES. 2. IT UNDERGOES WIDENING FOR DE-CREASING WRINKLES, LASER ALIGNMENT, WATER TANK IMMERSION, WATER REMOVAL BY ROLLING, TENSION CONTROL, AND THE WINDING IS DONE ON THE AXIAL WINDING DRUM OR THE DEDICATED EQUIPMENT OF THE A-SHAPED FRAME. 3. MAIN PARAMETERS: 4. MATERIAL: STAINLESS STEEL 304 5. WIDTH OF FABRIC: 3660mm QUANTITY: 1 SET Learn More

REFERENCE NUMBER: P-2067 SCLAVOS HT DYE MACHINE YEAR 1994 3 PORTS SCLAVOS HT DYE MACHINE YEAR: 1994 3 PORTS 140 DEGREE C CAPACITY: 500 KILOGRAMS EQUIPPED WITH: HEAT EXCHANGER ADD TANKS DOSING PUMPS OPERATOR PLAT FORM & COMPLETE WITH ELECTRICAL PANEL MACHINE IS STILL IN PRODUCTION 15 HP MAIN PUMP 50HZ 1HP 3HP LOWER N UNLOADING QUANTITY AVAILABLE: 1 Learn More