Search results for: 'Full Bla'

YY-2251 AIRLAID PRODUCTION LINE, FINAL PRODUCT WIDTH 2200mm ITEM 001 BALE OPENER (2 SETS) AND SEALED BALE OPENER (1 SET) ITEM 002 FIBER OPENING MACHINE (FOR LOW MELT FIBER OR PP) - 1 SET ITEM 003 PRE-OPENER – 1 SET ITEM 004 BIG CHAMBER BLENDER – 1 SET ITEM 005 MAIN-OPENER – 1 SET ITEM 006 VIBRATING FEEDER – 1 SET ITEM 007 CONDENSER – 2 SETS ITEM 008 AUTO-LEVER - 1 SET ITEM 009 AIR LAID MACHINE – 1 SET ITEM 010 AUTO-LEVER – 1 SET ITEM 011 BATT FEEDER – 1 SET ITEM 012 HIGH SPEED SINGLE SHAFT SINGLE BOARD PRE NEEDLE LOOM – 1 SET ITEM 013 HIGH SPEED SINGLE SHAFT SINGLE BOARD MAIN NEEDLE LOOM – 1 SET ITEM 014 DOUBLE BELT THERMAL-BONDED OVEN – 1 SET ITEM 015 DOUBLE-ROLLER CALENDER MACHINE – 1 SET ITEM 016 COOLING UNIT – 1 SET Learn More

YY-2261 COMPUTERIZED DOUBLE SADDLES QUILTING MACHINE WITH SUPPORT BELT, MAXIMUM SPEED 3000 RPM PER MINUTE, MAXIMUM QUILTING THICKNESS 50mm APPLICATION: SUITABLE FOR THE SINGLE HEAD QUILTING PATTERNS OF MATTRESS, DUVET, BLANKET, MATTRESS PROTECTOR. QUANTITY: 1 Learn More

T-8998 WESTAL ONE SHOT CHOCOLATE MOULDING LINE MOULD SIZE PLAIN 600mm X 220mm ONE SHOT CHOCOLATE MOULDING LINE MANUFACTURED BY WESTAL TYPE 600 ONE SHOT CHOCOLATE MOULDING LINE QUANTITY: 1 Learn More

J-4564 5 KILO SAMPLE SOFT FLOW MACHINE CAPACITY 5 TO 10 KILO MATERIAL CONSTRUCTION [HTHP-VESSEL] 316 L 5 mm THICKNESS PUMP SS 316 – MOTOR HP 3 HP – 1500 RPM DIAMETER OF VESSEL 1150 mm TOTAL LENTGH 2200 mm TOTAL WIDTH 3900 mm MAXIMUM WORKING HIGH TEMP. 135° C MAXIMUM WORKING PRESSURE 3 KG/ cm2 TUBE 1 TUBE SIZE DIAMETER 200 mm NOZZLE SIZE [OVERFLOW FIX ] DIAMETER 190 mm X 168 mm INSIDE WINCH (HP) 1 HP X 1 FOR FULLY AUTO COLOR TANK INJECTION PUMP 1 HP/3000 RPM UNLOADING WINCH 1 HP /200RPM GEAR BOX COLOR TANK (LITERS) 20 LITERS X 2 PIECES FILL (AUTO) DIAMETER 1.5” X 2 DRAIN [ AUTO] DIAMETER 1.5 ” X 2 OVER FLOW [AUTO] DIAMETER 1.5” X 1 HEAT [ AUTO] DIAMETER 1” COOL [ AUTO] DIAMETER 1” LIQUOR RATIO 1: 5 TO 1 : 7 [ DEPEND ON FABRIC] QUANTITY: 1 Learn More

J-2628 COMPLETE BIAS BINDING SYSTEM (SEWING, SLITTING & WINDING SYSTEM) – NEW SEWING MACHINE FOLDS FABRIC, STITCHES EDGE OF FABRIC FOR TWILL EFFECT WORKS TOGETHER WITH WINDING MACHINE AND STRIP CUTTING MACHINE WINDING MACHINE OPENS PREVIOUSLY FORMED TUBE MATERIAL, SPIRALLY, IN THE BIAS, AND REWINDS A SINGLE PLY ROLL, AT BOTTOM OF MACHINE THERE IS A KNIFE TO CUT SEWING FABRIC SEPARATELY, PREPARED FOR THE SLITTER SLITTER MACHINE HAS MANUAL, SEMI-AUTOMATIC AND FULLY AUTOMATIC MODES. WILL SLIT ANY TYPE OF MATERIAL ON THE ROLL (OPEN KNITS, WOVEN FABRIC, LEATHER, POLYESTER, SOME PAPER PRODUCTS, NONWOVEN, ETC) QUANTITY: 1 SLITTER, 1 WINDER Learn More

J-4496 EASTMAN RAPTOR 75X- 78X7-5 MACHINE IS PRACTICALLY NEW, ONLY RAN ABOUT 200 HOURS IN PERFECT RUNNING CONDITION AVAILABLE IMMEDIATELY MADE IN THE USA STANDARD EQUIPMENT RECIPROCATING STRAIGHT KNIFE WITH QUICK-REMOVAL CLAMP, 10 SPARE BLADES 2 AUTOMATED SHARPENING DISCS, 1 EXTRA SET OF DISCS INCLUDED (CHOICE OF: 60,80,100, OR 150 GRIT) Learn More

YY-2112 MASIAS SAD 3000 DIRECT FEEDING LINE SYSTEM FOR QUILTS, WADDINGS & SPECIAL NEEDLEPUNCHED PRODUCTS, YEAR 2004 HIGH PRODUCTION DIRECT FEEDING SYSTEM MADE BY MASIAS ON 2004 SUITABLE FOR THE PRODUCTION OF QUILTS (DUVETS & MATTRESSES) AND/OR WADDING. ALSO, SOME NEEDLEPUNCHED SPECIAL PRODUCTS FOR FURNITURE/MATTRESSES/TRANSPORT PROTECTION. Learn More

TT-1112 EXTRUSION LAMINATOR, UP TO 2200mm, ONE SIDED LAMINATING MACHINE (480 VOLTS, 3-PHASE, 60Hz) MAIN PROCESS AND PARAMETERS TECHNOLOGICAL PROCESS MAIN UNWINDING, RECTIFYING, EXTRUDING, COMPOUND CUTTING AND REWINDING. MAIN TECHNICAL PARAMETERS 1. RAW MATERIAL: SUITABLE FOR COATING RESIN LDPE, PP AND OTHER COATING BASE MATERIAL. 2. AUXILIARY BASE MATERIAL: PAPER, NON-WOVEN FABRIC, ALUMINUM FILM, WOVEN CLOTH AND OTHER APPLICABLE MATERIALS MECHANICAL SPEED: 60 TO 150 METERS/MINUTE (ACTUAL SPEED DEPENDS ON FILM MATERIAL, FILM WIDTH AND THICKNESS, ETC.) EFFECTIVE WIDTH OF LAMINATING: 1200 TO 2000mm LAMINATING THICKNESS: 0.008 TO 0.080mm LAMINATING THICKNESS ERROR ±5% TENSION SETTING RANGE: 20 TO 200 KG/FULL WIDTH CONSTANT TENSION MAXIMUM EXTRUSION: 200 KG/HOUR INNER DIAMETER OF BASE MATERIAL ROLL CORE: 76mm MACHINE POWER: 100 KW ACTUAL OPERATING POWER IS 50 KW TO 60 KW CONTROL TYPE OF COMPOUND SPEED AND LAMINATING THICKNESS: PLC COMPUTER, FULLY AUTOMATIC ELECTRICAL CONTROL LAMINATING WITH EMBOSSING: SINGLE-LAYER Learn More

T-9487 BENNINGER SYNTHETIC SIZING MACHINE, WORKING WIDTH 2800mm, YEAR 2001 BENNINGER ZELL SIZING MACHINE YEAR: 2001 MODEL: BEN FULLSIZE TYPE: ZMF-WKD-KSA-TF-MLT-TF-TW-BBA SET UP AS A 1 BEAM TO 1 BEAM SIZING (NO SECTIONAL CREEL) WORKING WIDTH: 2800mm PRODUCTION SPEED 0.14 TO 125 METERS PER MINUTE QUANTITY: 1 Learn More

YY-1952 TRÜTZSCHLER/HERGETH/SCHOTT & MEISSNER THERMOBOND LINE, WORKING WIDTH 2500mm DETAILS: WORKING WIDTH: 2500mm YEAR: 1995 TO 1998 VOLTAGE: 380 VOLTS, 3-PHASE, 50 Hz COMPLETE THERMOBONDING LINE MAXIMUM SPEED 15 METERS PER MINUTE CAPACITY UP TO 300 GSM, THROUGHPUT UP TO 300 KG PER HOUR DEPENDING ON TYPE OF FIBER CURRENTLY RUNNING A BLEND OF COTTON AND VISCOSE Learn More