Search results for: 'EXTRUDER'

FEATURES: 1. ROBUST AND RELIABLE. 2. SUITABLE FOR A WIDE SPECTRUM OF MATERIALS, INCLUDING LDPE, LLDPE, AND RECYCLED PE. 3. CAN PRODUCE FILMS WITH VARIOUS BUBBLE SIZES FROM DIAMTER 6 TO DIAMETER 32, BY CHANGING THE ROLLER. 4. INDEX REVOLVING WINDER IS EASY TO OPERATE. 5. VARIABLE SPEED DRIVE CAN GREATLY REDUCE ENERGY CONSUMPTION. 6. THIS MODEL CAN ALSO BE USED FOR FILMS WITH TWO LAYER FILM MACHINE. SPECIFICATIONS: MODEL: 25 MAXIMUM WIDTH: 2530mm MAXIMUM OUTPUT: 190 KG/HR LINE SPEED: 1100M/HR TOTAL POWER: 140 KW MACHINE WEIGHT: 8200 KGS MODEL: 16 MAXIMUM WIDTH: 1630mm MAXIMUM OUTPUT: 120 KG/HR LINE SPEED: 1100M/HR TOTAL POWER: 85 KW MACHINE WEIGHT: 6500 KGS Learn More

YY-2424 USED NGR REGRANULATION LINE for BOPP FILM, FLUFF, LUMPS, MDO WASTE 900 TO 1000 KG PER H OVERCONSUMPTION: 500 KW OUTPUT: 1000 KGS PER HOUR INTENDED FOR THE FOLLOWING WASTE: OUTPUT; BOPP FILM, FLUFF, LUMPS, MDO WASTE: 900 TO 1000 KG/H; CPP FILM, FLUFF, LUMPS: 900 TO 1000 KG/H; PERFORMANCE IS PROVIDED FOR REFERENCE ONLY. THE CAPACITY OF THE DEVICE DEPENDS ON THE PROPERTIES OF THE MATERIAL, E.G. MOISTURE CONTENT, PRINTING, WEIGHT, MELT INDEX, CONTAMINATION AND DEGREE OF FILTRATION. AVERAGE POWER CONSUMPTION: 500 KW; AVERAGE COOLING WATER DEMAND: 668 L/MIN; AVERAGE FRESH WATER CONSUMPTION: 34 L/H; MAXIMUM COMPRESSED AIR CONSUMPTION: 100 L/MIN. THE VALUES GIVEN ABOVE ARE ONLY REFERENCE VALUES AND MAY DIFFER FROM THE VALUES FINAL VALUES OBTAINED AFTER CALIBRATION OF THE DEVICE. THIS DATA SHOULD NOT BE USED FOR PLANNING. Learn More

T-7018 LINE FOR PRODUCING 70 TO 150 DENIER FROM RECYCLED BOTTLES EXTRUDER Φ 160/25 PRODUCT TYPE PET-POY END/POSITION 12 ENDS POSITIONS 24 POSITIONS POSITION/SPINNING BEAM 2 POSITIONS/SPINNING BEAM POSITION DISTANCE (mm) 1500mm SPINNING PACK CYLINDER TYPE, BOTTOM MOUNTED SPINNERET DIAMETER (mm) Φ 90mm CROSS BLOWING AREA 1430mm X 1380mm GEAR PUMP SPECIFICATIONS (CC/REV) 12X3.0CC/REV GEAR PUMP QUANTITY/POSITION 1 OIL PUMP SPECIFICATION (CC/REV) 12X0.12CC/REV OIL PUMP QUANTITY/ POSITION 1 DOWTHERM BOILER/LINE 600L/65KW GUIDE ROLLER SYSTEM (DIAMETER X WIDTH) 160mm X 160mm MIGRATION JET AWA. JAPAN WINDER TWA1800-12ENDS Learn More

J-3004 FIBRILLATED RAFFIA TAPE EXTRUSION LINE – NEW, 120mm PP FIBRILLATED YARN EXTRUDER LINE MODEL: NOVASTAR-120 EXTRUSION LINE FOR PRODUCTION OF PP FIBRILLATED YARN RAW MATERIAL: PP GRANULE FINISHED PRODUCTS: NON-TWISTED TAPE YARN, FIBRILLATED YARN FOR TWINE RANGE OF PRODUCT: 10,000 TO 30,000 DENIER 10000 DENIER APPROXIMATELY 17 TO 19 YARN 16000 DENIER APPROXIMATELY 11 TO 12 YARN 22000 DENIER APPROXIMATELY 8 TO 9 YARN 28000 DENIER APPROXIMATELY 6 TO 7 YARN 32000 DENIER APPROXIMATELY 5 TO 6 YARN EXTRUSION THROUGHPUT: 300 KG PER HOUR EXTRUSION CAPACITY: 180 TO 250 KG PER HOUR (PRODUCT CAPACITY DEPEND ON FILAMENT SIZE) EXTRUDER SCREW DIAMETER: Ø 120mm T-DIE WIDTH: 1300mm TAKE-OFF ROLLER WIDTH: 1200mm TAKE-OFF LINE SPEED: 160 METERS PER MINUTE (MAXIMUM) OPERATION SIDE: RIGHT TO LEFT, OR LEFT TO RIGHT Learn More

TT-2274 FIBRE EXTRUSION TECHNOLOGIES LIMITED FET-100 SERIES PILOT MELT SPINNING SYSTEM, YEAR 2020 FIBRE EXTRUSION TECHNOLOGIES LIMITED FET-100 SERIES PILOT MELT SPINNING SYSTEM FOR CONTINUOUS FILAMENT YARN APPLICATIONS (MULTIFILAMENT) YEAR 2020 AVAILABLE FOR IMMEDIATE SALE QUANTITY: 1 Learn More

TT-1059 SML COEX CAST FILM EXTRUSION LINE, YEAR 2011, 2230 KG PER HOUR MAIN LINE COMPONENTS MANUFACTURERS: SML: EXTRUDER; CHAIR, ROLLERS, WINDING DEVICE GWK: COOLING EXTRUDER KREYENBORG: SCREEN CHANGER CLOEREN: FEED BLOCK, SLOT DIE PIOVAN: DRYER, DOSING DEVICE SERVE: EDGE BAND CUTTING DEVICE MATHO: SUCTION RAPID: EDGE STRIP SHREDDER KONGSHILDE: RECYLING EDGE STRIPS, START ROLLERS INFSTAUB: FILLING STATION SMK: CHILLERS SIEMENS: CONTROL OCS: CAMERA SYSTEM SEMET: LABELING SYSTEM AFS: CORONA SATION BETA CONTROLL: RADIOMETRIC THICKNESS MEASUREMENT SML: AUTOM. FYLING SPLICE WINDING UNIT, BECKOFF CONTROL SIMCO: ANTISTATIC ALTEK: AUTOMATIC ROLL MANIPULATOR (TRANSFER CARRIAGE) QUANTITY: 1 Learn More

TT-2604 COLINES BARRIERCAST FILM EXTRUSION LINES - CAST FILM, FILM WIDTH 2100mm, YEAR 2004 BRAND: COLINES MODEL: BARRIERCAST YEAR: 2004 QUANTITY: 1 Learn More

TT-3595 SML COEX CAST FILM EXTRUSION LINE, FILM WIDTH RANGE 1600 TO 2110mm, YEAR 2011 BRAND: SML EXTRUDERS CONDITION: USED YEAR: 2011 QUANTITY: 1 Learn More

INVENTORY NUMBER: E-4258 POLYESTER PACKING TAPE MACHINE (FROM RECYCLED PET SCRAP): XDC TSE-65/32 PET PRODUCTION CONDITION: NEW 1. ELECTRICAL VOLTAGE: 380V/3P/50HZ OR AS PER CUSTOMER 2. MATERIAL: PET SCRAP 3. MAX. EXTRUSION OUTPUT: 350KG PER HOUR NOTE：PRODUCTION CAPACITY DEPENDS ON RAW MATERIAL AND OPERATION. 4. SPECIFICATION：WIDTH OF TAPE 9 TO 24 mm, THICKNESS: 0.5 TO 1.2 mm 5. LINE SPEED：80M/MIN 6. CENTER HEIGHT OF EXTRUDER: 1000 mm 7. OPERATION DIRECTION: FROM RIGHT TO LEFT 8. POWER REQUIREMENT: 212KW（APPROX. 127KW AT CONTINUOUS USAGE） 9. COOLING RECYCLE: ≤20℃ ≥0.3MPA ～2T/H 10. AIR CONSUMPTION: 0.4 CUBIC METER PER MINUTE; PRESSURE ＞0.5MPA QUANTITY AVAILABLE: 1 Learn More

TT-3593 SML CAST FILM EXTRUSION LINE, 3 LAYERS, WIDTH 2000mm, YEAR 1997 BRAND: SML EXTRUDERS CONDITION: USED YEAR: 1997 QUANTITY: 1 Learn More