TT-2176 BRUCKNER HIGH-PERFORMANCE STENTER, WORKING WIDTH 1300 TO 4200mm, YEAR 2018
BRUCKNER HIGH-PERFORMANCE STENTER
TYPE: POWER-FRAME SPLIT FLOW
YEAR 2018
ROLLER WIDTH 4400mm
WORKING WIDTH 1300 TO 4200mm
SPEED 80 M/MIN
MACHINE IS IN EXCELLENT CONDITION AND ONLY FEW RUNNING HOURS
QUANTITY: 1
Learn More
YY-2144 MULTIFUNCTION COATING HEAD, 1650mm BY KNIFE OR 1750mm BY ENGRAVED ROLLER
DETAILS:
1. COMBINED COATING MACHINE FOR ONE FINISHING AND COATING
NOMINAL WIDTH 1800mm.
MAXIMUM COATING WIDTH: BY KNIFE 1650mm, BY ENGRAVED ROLLER 1750mm
WITH FOLLOWING WORKING MODES POSSIBILITIES:
- REVERSE ROLL
- SYNCHRO ROLL
- REVERSE ROLL "ON AIR"
- SYNCHRO ROLL "ON AIR" - BLADE "ON AIR"
- BLADE ON COUNTER- ROLLER
COMPOSED OF:
- WELDED STEEL FRAMEWORK WITH HIGH;
- ORSION RIGIDITY;
- RUBBERIZED COUNTER-ROLLER DIAMETER 400mm, OIL AND SOLVENTS RESISTANT;
- HARDNESS 85 SHORE A, MAX ECCENTRICITY TOLERANCE ±1/100mm;
- A/C GEARMOTOR TO DRIVE THE COUNTER ROLLER;
- ROLLER CHANGING DEVICE (BRIDGE), ARRANGED TO MOUNT TWO ENGRAVED ROLLERS AND ONE COATING KNIFE;
- PNEUMATIC LIFTING OF CHANGING DEVICE (BRIDGE);
- MANUAL ROTATION OF THE ROLLER CHANGING DEVICE;
- MOTORIZED MICROMETRIC ADJUSTMENT OF COATING THICKNESS, INDEPENDENT RIGHT/LEFT OR IN TANDEM, WITH DIGITAL DISPLAY ON CONTROL PANEL, BY TWO JACKS;
- COATING SIDE LIMITERS, MANUALLY ADJUSTABLE EITHER SINGLE OR TANDEM;
- FEEDING THROUGH IN FRONT OF THE COATING KNIFE;
- A/C GEARMOTOR TO DRIVE THE ENGRAVED ROLLER;
- TWO COLOUR DOCTOR BLADES (SYNCHRO / REVERSE) WITH PNEUMATIC OPENING AND CLOSING FOR A SMOOTHER MOVEMENT OF THE BLADE TOWARDS THE ROLLER, WITH OSCILLATING MOVEMENT;
- ENTRY IDLER ROLLER, THE UPPER ONE LIFTABLE BY PNEUMATIC PISTONS FOR "ON AIR" COATING;
- PIPING FOR THE WASHING OF THE ENGRAVED ROLLER;
- TWO SIDE GUTTERS IN STAINLESS-STEEL WITH TEFLON COATING, WITH SOLVENT RESISTANT RUBBER PIPE FOR WASTEWATER OR CHEMICALS COLLECTION AND RECIRCULATION;
- WASTEWATER RECOVERY BASIN, WITH DRAIN, UNDER THE COUNTER-ROLLER;
- MANUAL SEAM JUMPER;
- VARIABLE SPEED FROM 2,5 TO 50 M/MIN FOR THE COUNTER-ROLLER AND FROM 2,5 TO 99 M/MIN FOR THE ENGRAVED ROLLER;
- PIVOTING CONTROL PANEL WITH DIGITAL SCREEN, MOUNTED ON THE MACHINE FRAME, TO CONTROL AND SET THE MACHINE FUNCTIONS;
- MAIN ELECTRICAL PANEL EQUIPPED WITH PLC AND INVERTERS, PROTECTION IP54, MOUNTED INSIDE THE LEFT HAND MACHINE SHOULDER;
- SET OF MACHINE ACCESSORIES AND INSTRUCTION & MAINTENANCE MANUAL.
Learn More
T-9487 BENNINGER SYNTHETIC SIZING MACHINE, WORKING WIDTH 2800mm, YEAR 2001
BENNINGER ZELL SIZING MACHINE
YEAR: 2001
MODEL: BEN FULLSIZE
TYPE: ZMF-WKD-KSA-TF-MLT-TF-TW-BBA
SET UP AS A 1 BEAM TO 1 BEAM SIZING (NO SECTIONAL CREEL)
WORKING WIDTH: 2800mm
PRODUCTION SPEED 0.14 TO 125 METERS PER MINUTE
QUANTITY: 1
Learn More
T-9752 KARL MAYER CARBON MACHINES BIAXIAL AND MULTIAXIAL
PROPERTIES:
SINCE ALL FIBERS POINT IN ONE DIRECTION, THE SCRIM CAN BE IDEALLY DRAPED
GOOD SOAKABILITY WITH LITTLE RESIN CONSUMPTION
CAN BE DRAPED VERY WELL AROUND CURVES AND EDGES
EASY TO CUT
ELECTRICALLY CONDUCTIVE, INFUSIBLE
HIGH STRENGTH AND RIGIDITY DUE TO GRAPHITE-LIKE FIBER STRUCTURE
BIOCOMPATIBLE
TRANSPARENT TO X-RAYS
LOW SPECIFIC WEIGHT
IDEAL FOR SURFACE USE (LITTLE FIBER IMPRINTS)
IDEAL FOR PROCESSING WITH EPOXY RESIN!
TEXTILE SEMI-FINISHED PRODUCTS MADE OF PRE-SPREAD AND PLANE-PARALLEL LAID FIBERS FORM THE GROUP OF UNIDIRECTIONAL FABRICS. THE FIBERS ARE USUALLY LAID AT 0°, MORE RARELY AT 90°. BY LAYING THE UD FABRICS ALONG THE LINES OF FORCE ACTING IN THE COMPONENT, THE LIGHTWEIGHT POTENTIAL OF THE CARBON FIBER IS OPTIMALLY EXPLOITED.
UD FABRICS CONSIST OF ONE OR MORE SUPERIMPOSED FIBER LAYERS FIXED WITH AN EPOXY-COMPATIBLE BINDER THREAD. THE SPECIAL SPREADING TECHNIQUE PRODUCES FABRICS WITH HIGH FIBER PARALLELISM, WITHOUT KNOTS AND FIBER TWIST. SPREAD FIBERS ABSORB THE RESIN BETTER, RESULTING IN HIGHEST LAMINATE STRENGTHS.
QUANTITY: 3 LINES
Learn More
T-8553 CNC SEWING UNIT KSL 110, SEWING FIELD 600 x 600 TO 3500 x 2500mm, YEAR 2003, PARACHUTE PRODUTION
CONTINUOUS MULTIPLE FOOT TRANSPORT
EXACT SEAM PATTERN / THREAD TIGHTENING IN ALL SEWING DIRECTIONS
LIFTABLE AND / OR MOVABLE SEWING HEAD FOR DIRECT ROUTE PROGRAMMING
AUTOMATIC MATERIAL HOLDER RECOGNITION
OVERLAPPING WORKING METHOD DURING THE SEWING PROCESS
CURRENTLY SEWING CLOTHS FOR FILTERS
QUANTITY: 1
Learn More
TT-2851 FEHRER NL 28 PRE-NEEDLE LOOM, WORKING WIDTH 2640mm TO 2700mm, YEAR 1976TT-2851 FEHRER NL 28 PRE-NEEDLE LOOM, WORKING WIDTH 2640mm TO 2700mm, YEAR 1976 ITEM 001 FEHRER NL 28 PRE-NEEDLE LOOM QUANTITY: 1 ITEM 002 FEHRER NL 9 PRE-NEEDLE LOOM QUANTITY: 1 ITEM 003 FEHRER NL 12 FINISHING NEEDLE LOOM QUANTITY: 1 Learn More
TT-2176 BRUCKNER HIGH-PERFORMANCE STENTER, WORKING WIDTH 1300 TO 4200mm, YEAR 2018TT-2176 BRUCKNER HIGH-PERFORMANCE STENTER, WORKING WIDTH 1300 TO 4200mm, YEAR 2018 BRUCKNER HIGH-PERFORMANCE STENTER TYPE: POWER-FRAME SPLIT FLOW YEAR 2018 ROLLER WIDTH 4400mm WORKING WIDTH 1300 TO 4200mm SPEED 80 M/MIN MACHINE IS IN EXCELLENT CONDITION AND ONLY FEW RUNNING HOURS QUANTITY: 1 Learn More
TT-2138 LAROCHE / THIBEAU / ASSELIN / ICBT / FLEISSNER/ SPUNLACE / JETLACE / HYDROENTANGLEMENT LINES, YEAR 2000TT-2138 LAROCHE / THIBEAU / ASSELIN / ICBT / FLEISSNER/ SPUNLACE / JETLACE / HYDROENTANGLEMENT LINES, YEAR 2000 Learn More
TT-1312 COLOMBO PVC LACQUER COATING MACHINE, WORKING WIDTH 2600mm, YEAR 2000TT-1312 COLOMBO PVC LACQUER COATING MACHINE, WORKING WIDTH 2600mm, YEAR 2000 QUANTITY: 1 Learn More
YY-2144 MULTIFUNCTION COATING HEAD, 1650mm BY KNIFE OR 1750mm BY ENGRAVED ROLLERYY-2144 MULTIFUNCTION COATING HEAD, 1650mm BY KNIFE OR 1750mm BY ENGRAVED ROLLER DETAILS: 1. COMBINED COATING MACHINE FOR ONE FINISHING AND COATING NOMINAL WIDTH 1800mm. MAXIMUM COATING WIDTH: BY KNIFE 1650mm, BY ENGRAVED ROLLER 1750mm WITH FOLLOWING WORKING MODES POSSIBILITIES: - REVERSE ROLL - SYNCHRO ROLL - REVERSE ROLL "ON AIR" - SYNCHRO ROLL "ON AIR" - BLADE "ON AIR" - BLADE ON COUNTER- ROLLER COMPOSED OF: - WELDED STEEL FRAMEWORK WITH HIGH; - ORSION RIGIDITY; - RUBBERIZED COUNTER-ROLLER DIAMETER 400mm, OIL AND SOLVENTS RESISTANT; - HARDNESS 85 SHORE A, MAX ECCENTRICITY TOLERANCE ±1/100mm; - A/C GEARMOTOR TO DRIVE THE COUNTER ROLLER; - ROLLER CHANGING DEVICE (BRIDGE), ARRANGED TO MOUNT TWO ENGRAVED ROLLERS AND ONE COATING KNIFE; - PNEUMATIC LIFTING OF CHANGING DEVICE (BRIDGE); - MANUAL ROTATION OF THE ROLLER CHANGING DEVICE; - MOTORIZED MICROMETRIC ADJUSTMENT OF COATING THICKNESS, INDEPENDENT RIGHT/LEFT OR IN TANDEM, WITH DIGITAL DISPLAY ON CONTROL PANEL, BY TWO JACKS; - COATING SIDE LIMITERS, MANUALLY ADJUSTABLE EITHER SINGLE OR TANDEM; - FEEDING THROUGH IN FRONT OF THE COATING KNIFE; - A/C GEARMOTOR TO DRIVE THE ENGRAVED ROLLER; - TWO COLOUR DOCTOR BLADES (SYNCHRO / REVERSE) WITH PNEUMATIC OPENING AND CLOSING FOR A SMOOTHER MOVEMENT OF THE BLADE TOWARDS THE ROLLER, WITH OSCILLATING MOVEMENT; - ENTRY IDLER ROLLER, THE UPPER ONE LIFTABLE BY PNEUMATIC PISTONS FOR "ON AIR" COATING; - PIPING FOR THE WASHING OF THE ENGRAVED ROLLER; - TWO SIDE GUTTERS IN STAINLESS-STEEL WITH TEFLON COATING, WITH SOLVENT RESISTANT RUBBER PIPE FOR WASTEWATER OR CHEMICALS COLLECTION AND RECIRCULATION; - WASTEWATER RECOVERY BASIN, WITH DRAIN, UNDER THE COUNTER-ROLLER; - MANUAL SEAM JUMPER; - VARIABLE SPEED FROM 2,5 TO 50 M/MIN FOR THE COUNTER-ROLLER AND FROM 2,5 TO 99 M/MIN FOR THE ENGRAVED ROLLER; - PIVOTING CONTROL PANEL WITH DIGITAL SCREEN, MOUNTED ON THE MACHINE FRAME, TO CONTROL AND SET THE MACHINE FUNCTIONS; - MAIN ELECTRICAL PANEL EQUIPPED WITH PLC AND INVERTERS, PROTECTION IP54, MOUNTED INSIDE THE LEFT HAND MACHINE SHOULDER; - SET OF MACHINE ACCESSORIES AND INSTRUCTION & MAINTENANCE MANUAL. Learn More
T-9487 BENNINGER SYNTHETIC SIZING MACHINE, WORKING WIDTH 2800mm, YEAR 2001T-9487 BENNINGER SYNTHETIC SIZING MACHINE, WORKING WIDTH 2800mm, YEAR 2001 BENNINGER ZELL SIZING MACHINE YEAR: 2001 MODEL: BEN FULLSIZE TYPE: ZMF-WKD-KSA-TF-MLT-TF-TW-BBA SET UP AS A 1 BEAM TO 1 BEAM SIZING (NO SECTIONAL CREEL) WORKING WIDTH: 2800mm PRODUCTION SPEED 0.14 TO 125 METERS PER MINUTE QUANTITY: 1 Learn More
T-9752 KARL MAYER CARBON MACHINES BIAXIAL AND MULTIAXIALT-9752 KARL MAYER CARBON MACHINES BIAXIAL AND MULTIAXIAL PROPERTIES: SINCE ALL FIBERS POINT IN ONE DIRECTION, THE SCRIM CAN BE IDEALLY DRAPED GOOD SOAKABILITY WITH LITTLE RESIN CONSUMPTION CAN BE DRAPED VERY WELL AROUND CURVES AND EDGES EASY TO CUT ELECTRICALLY CONDUCTIVE, INFUSIBLE HIGH STRENGTH AND RIGIDITY DUE TO GRAPHITE-LIKE FIBER STRUCTURE BIOCOMPATIBLE TRANSPARENT TO X-RAYS LOW SPECIFIC WEIGHT IDEAL FOR SURFACE USE (LITTLE FIBER IMPRINTS) IDEAL FOR PROCESSING WITH EPOXY RESIN! TEXTILE SEMI-FINISHED PRODUCTS MADE OF PRE-SPREAD AND PLANE-PARALLEL LAID FIBERS FORM THE GROUP OF UNIDIRECTIONAL FABRICS. THE FIBERS ARE USUALLY LAID AT 0°, MORE RARELY AT 90°. BY LAYING THE UD FABRICS ALONG THE LINES OF FORCE ACTING IN THE COMPONENT, THE LIGHTWEIGHT POTENTIAL OF THE CARBON FIBER IS OPTIMALLY EXPLOITED. UD FABRICS CONSIST OF ONE OR MORE SUPERIMPOSED FIBER LAYERS FIXED WITH AN EPOXY-COMPATIBLE BINDER THREAD. THE SPECIAL SPREADING TECHNIQUE PRODUCES FABRICS WITH HIGH FIBER PARALLELISM, WITHOUT KNOTS AND FIBER TWIST. SPREAD FIBERS ABSORB THE RESIN BETTER, RESULTING IN HIGHEST LAMINATE STRENGTHS. QUANTITY: 3 LINES Learn More
YY-1521COMPUTERIZED SINGLE HEAD QUILTING MACHINEYY-1521COMPUTERIZED SINGLE HEAD QUILTING MACHINE QUANTITY: 1 Learn More
T-8791 NEEDLING+THERMOBONDING LINE, WORKING WIDTH 4500mm, YEAR 1995 TO 2005T-8791 NEEDLING+THERMOBONDING LINE, WORKING WIDTH 4500mm, YEAR 1995 TO 2005 QUANTITY: 1 Learn More
T-8553 CNC SEWING UNIT KSL 110, SEWING FIELD 600 x 600 TO 3500 x 2500mm, YEAR 2003, PARACHUTE PRODUTIONT-8553 CNC SEWING UNIT KSL 110, SEWING FIELD 600 x 600 TO 3500 x 2500mm, YEAR 2003, PARACHUTE PRODUTION CONTINUOUS MULTIPLE FOOT TRANSPORT EXACT SEAM PATTERN / THREAD TIGHTENING IN ALL SEWING DIRECTIONS LIFTABLE AND / OR MOVABLE SEWING HEAD FOR DIRECT ROUTE PROGRAMMING AUTOMATIC MATERIAL HOLDER RECOGNITION OVERLAPPING WORKING METHOD DURING THE SEWING PROCESS CURRENTLY SEWING CLOTHS FOR FILTERS QUANTITY: 1 Learn More