Search results for: 'rollers'

T-9717 COLD PIN PERFORATING UNITS, WORKING WIDTH 1800mm, REFURBISHED COLD PIN PERFORATING UNITS REFURBISHED WORKING WIDTH 1800mm YEAR: UNKNOWN, ESTIMATED TO BE LATE 1990’s WORKS WITH PLASTIC FILM, FOIL OR PAPER AND SOME NONWOVENS COLD PIN PERFORATING UNIT CAN BE USED FOR PERFORATING OR EMBOSSING EASY TEAR LINES FOR BAGS PRODUCT EMBOSSING FOR GRIP OR IDENTIFICATION WEB DRIVEN UNIT DIMENSIONS: 23” (585mm) WIDE X 36” (915mm) TALL X 105” (2667mm) LONG NO PINNED TOOLING IS INCLUDED WITH THE UNIT HOWEVER, A WIDE RANGE OF PINNED TOOLING CAN BE USED WITH THIS UNIT TO CREATE AN ARRAY OF HOLE SIZES AND PATTERNS. QUANTITY: 2 Learn More

T-9875 COLD PIN PERFORATING UNIT, WORKING WIDTH 1100mm COLD PIN PERFORATING UNIT REFURBISHED WORKING WIDTH 1100mm WORKS WITH PLASTIC FILM, FOIL OR PAPER AND SOME NONWOVENS CAN BE USED FOR PERFORATING OR EMBOSSING PRODUCE MACHINE DIRECTION EASY TEAR LINES FOR BAGS PRODUCT EMBOSSING FOR GRIP OR IDENTIFICATION WEB DRIVEN UNIT DIMENSIONS: 21” (535mm) WIDE X 17” (432mm) TALL X 69” (1750mm) LONG NO PINNED TOOLING IS INCLUDED WITH THE UNIT, HOWEVER, A WIDE RANGE OF PINNED TOOLING CAN BE USED WITH THIS UNIT TO CREATE AN ARRAY OF HOLE SIZES AND PATTERNS QUANTITY: 2 Learn More

TT-1112 EXTRUSION LAMINATOR, UP TO 2200mm, ONE SIDED LAMINATING MACHINE (480 VOLTS, 3-PHASE, 60Hz) MAIN PROCESS AND PARAMETERS TECHNOLOGICAL PROCESS MAIN UNWINDING, RECTIFYING, EXTRUDING, COMPOUND CUTTING AND REWINDING. MAIN TECHNICAL PARAMETERS 1. RAW MATERIAL: SUITABLE FOR COATING RESIN LDPE, PP AND OTHER COATING BASE MATERIAL. 2. AUXILIARY BASE MATERIAL: PAPER, NON-WOVEN FABRIC, ALUMINUM FILM, WOVEN CLOTH AND OTHER APPLICABLE MATERIALS MECHANICAL SPEED: 60 TO 150 METERS/MINUTE (ACTUAL SPEED DEPENDS ON FILM MATERIAL, FILM WIDTH AND THICKNESS, ETC.) EFFECTIVE WIDTH OF LAMINATING: 1200 TO 2000mm LAMINATING THICKNESS: 0.008 TO 0.080mm LAMINATING THICKNESS ERROR ±5% TENSION SETTING RANGE: 20 TO 200 KG/FULL WIDTH CONSTANT TENSION MAXIMUM EXTRUSION: 200 KG/HOUR INNER DIAMETER OF BASE MATERIAL ROLL CORE: 76mm MACHINE POWER: 100 KW ACTUAL OPERATING POWER IS 50 KW TO 60 KW CONTROL TYPE OF COMPOUND SPEED AND LAMINATING THICKNESS: PLC COMPUTER, FULLY AUTOMATIC ELECTRICAL CONTROL LAMINATING WITH EMBOSSING: SINGLE-LAYER Learn More

TT-1059 SML COEX CAST FILM EXTRUSION LINE, YEAR 2011, 2230 KG PER HOUR MAIN LINE COMPONENTS MANUFACTURERS: SML: EXTRUDER; CHAIR, ROLLERS, WINDING DEVICE GWK: COOLING EXTRUDER KREYENBORG: SCREEN CHANGER CLOEREN: FEED BLOCK, SLOT DIE PIOVAN: DRYER, DOSING DEVICE SERVE: EDGE BAND CUTTING DEVICE MATHO: SUCTION RAPID: EDGE STRIP SHREDDER KONGSHILDE: RECYLING EDGE STRIPS, START ROLLERS INFSTAUB: FILLING STATION SMK: CHILLERS SIEMENS: CONTROL OCS: CAMERA SYSTEM SEMET: LABELING SYSTEM AFS: CORONA SATION BETA CONTROLL: RADIOMETRIC THICKNESS MEASUREMENT SML: AUTOM. FYLING SPLICE WINDING UNIT, BECKOFF CONTROL SIMCO: ANTISTATIC ALTEK: AUTOMATIC ROLL MANIPULATOR (TRANSFER CARRIAGE) QUANTITY: 1 Learn More

TT-1009 COMPLETE MALIWATT STITCH-BONDING PRODUCTION LINE, WORKING WIDTH 2800mm MALIWATT STITCH BONDING LINE BRAND: MALIWATT BONINO ALL ELECTRIC MOTORS ALL ELECTRIC CONTROL PANELS WITH INVERTERS RECENT ELECTRIC CONTROL PANEL OF THE CARDING MACHINE, WITH INVERTERS OF INLET UNITS, MAIN SWIFTS AND DOFFERS, BLACK-OUT FAIL-SAFE SYSTEM PROCESSED FIBERS: FROM 1.5 TO 15 DTEX PRODUCT WEIGHTS: FROM 70 TO 350/400 GSM QUANTITY: 1 SET Learn More

TT-1015 TATHAM FEARNOUGHT OPENER TYPE F2000, WIDTH 2000mm, YEAR 1998 EXTENDED PVC FACED ENDLESS FEED BELT WITH FULL WIDTH SUPPORT PLATE HEAVY DUTY FABRICATED STEEL SIDE PLATES DUPLEX CHAIN DRIVE TO THE WORKERS AND STRIPPERS SEALED BALL/ROLLER BEARING UNITS HINGED TOP COVERS WITH GAS STRUTS FOR EASY ACCESS SIDE GUARDS ELECTRIC PANEL QUANTITY: 1 Learn More

T-9575 BABCOCK STENTER, WORKING WIDTH 3600mm, YEAR 1999 IN 2014 REFURBISHED WITH NEW PLC AND N° 2 PC OF SETEX OIL FREE CHAIN RECENTLY CHANGED PADDER AND WEFT STRAIGHTENER ARE NOT AVAILABLE QUANTITY: 1 Learn More

REFERENCE NUMBER: J-3756 MERELLO MATTRESS PACKING MACHINE, MODEL ME-104, MAX. MATTRESS 2250 x 2250 x 500mm MAKE: MERELLO MODEL: ME-104 BAG IS MADE OF PLASTIC ROLLS (PE), THICKNESS FROM 50 TO 200 MICROMETERS AUTOMATIC ADJUSTMENT OF THE WIDTH, HEIGHT AND THICKNESS OF THE MATTRESS MATTRESS DIMENSIONS: FROM 1700 x 700 x 100mm TO 2250 x 2250 x 500mm DETECTS THE THICKNESS OF THE MATTRESS AND APPLIES THE PROGRAMMED PRESSURE TO FURTHER TIGTHEN THE BAG PLASTIC CUTS WITH COLD KNIFE: MAINTENANCE-FREE, SMOKE OR ODOR FREE REINFORCEMENT COIL: MOTORIZED ROLLERS FOR PLACING ADDITIONAL PLASTIC ROLLERS TRANSISTORIZED PLC CONTROL AND TOUCH SCREEN THAT REPORTS THE STATUS OF HE MACHINE VARIABLE SPEED DRIVE IN ALL MOTORS TO EXTEND THEIR LIFE THE MACHINE CAN STORE 4 + 4 BOBBINS IN WORKING POSITION Learn More

T-8176 A8 OPEN END MACHINE, 552 ROTORS, YEAR 2015 A8 OPEN END MACHINE YEAR 2015 552 ROTORS PER SET SAME TIME CAN PRODUCE 3 TYPE YARN 4 PCS ROBOTS COROLAB CLEANER T633BD ROTOR CUP BD174 COMBING ROLLER MOMENT SPINNING 20S COTTON YARN MACHINE WIDTH: 1547mm QUANTITY: 2 Learn More

REFERENCE NUMBER: T-6868 NEEDLE PUNCH LINE, EXIT WIDTH 2200/2500mm, CAPACITY 400 KGS, OVERHAULED AND UPDATED 2012 AND 2015 NEEDLE PUNCH LINE EXIT WIDTH 2200/2500mm OVERHAULED AND UPDATED IN 2012/2015 TECHNOLOGY CONTROL BY S7 DESIGNED AND USED FOR NATURAL FIBRES, GLASS FIBRES, RECYCLED FIBRES 100% OR MIXED WITH PP FOR BASIC MATERIALS OF THE AUTOMOTIVE INDUSTRY CAPACITY: 400 KGS ITEM 001 2 BALE OPENER BRAND TEMAFA WORKING WIDTH: 1400mm WOODEN LATICE BELTS WOODEN TRANSPORT LATTICE VERY GOOD CONDITION INDIVIDUAL CONTROL OF OPENING AND MIXING ITEM 002 WILLOW BRAND TEMAFA 4 PAIRS STRIPPING AND WORKING ROLLERS WORKING WIDTH: 1400mm WITH VENTILATOR AND PIPE SYSTEM TO CHUTE FEED AND HOPPER FEEDER ITEM 003 CHUTE FEED BRAND TEMAFA WORKING WIDTH: 2700mm CONTROL OF FILLING HEIGHT BY ULTRASOUND SENSORS ITEM 004 HOPPER FEEDER BRAND OCTIR (RSP) GROUND BELT BY WOODEN LATTICE AND DRIVEN BY SEPARATE DRIVE VIA ECCENTRIC VIBRATION WALL MOBILE FRON WALL ITEM 005 CARDING MACHINE WORKING WIDTH: 2500mm 5 PAIRD STRIPPER AND WORKER INSTALLED 1 PAIR STRIPPER/WORKER SEPARATE DELIVERY INDIVIDUAL DRIVE SYSTEMS RIGID CARD CLOTHING MAIN DRUM 1600mm DIAMETER DOFFER DRUM 1200mm AND FLY COMB ITEM 006 CROSS LAPPER WEB FEEDING BY TRANSILON-BELTS EXIT BELT AS WOODEN LATTICE BELT ITEM 007 PRE-NEEDLE MACHINE BRAND DILO MODI DVM25 WORKING WIDTH: 2500mm ALL BELT SYSTEMS USE WOODEN LATTICE BELTS 1 NEEDLE BOARD NEEDLING FROM TOP TO BOTTOM ITEM 008 NEEDLE MACHINE BRAND ASSELIN WORKING WIDTH: 2200mm 4 NEEDLE BAR MACHINE (2 TOP/2 BOTTOM) ALTERNATING AND SIMULTANEOUS WORKING METHODS BY MODIFICATION OF DRIVING BELT WAYS PULL-OUT ROLLERS AT EXIT STROKE HEIGHT 40mm ITEM 009 ROLLING MACHINE 3 LONGITUDINAL CUTTER (TOP AND BOTTOM DRIVEN) 1 CROSS CUTTER CONTROL OF THE LINE: SEPARATE SYSTEM FOR BALE OPENING AND MIXING S7 CONTROL FOR COMPLETE LINE UPR TO DATE LEVEL, AIRCONDITIONED, CONTROL CABINETS CLOSE TO MACHINE OR SEPARATE MACHINES ARE IN VERY GOOD AND UPDATED CONDITION Learn More