Search results for: 'High tem'

TT-6207 TETRA PAK BOTTLING PLANT A3 FLEX SLIM 5500 BPH 1.5L, YEAR 2020 1. BOTTLING LINE TETRA PAK A3 FLEX SLIM 5500 BPH 1.5L 2. YEAR OF CONSTRUCTION 2020 3. CONDITION USED 4. MACHINE TYPE: BOTTLING LINE TETRA PAK A3 FLEX SLIM 5500 BPH 1.5L 5. BRAND: TETRA PAK 6. MODEL: BOTTLING PLANT 7. CONDITION: USED 8. OPERATING HOURS: 500 H QUANTITY: 1 Learn More

AA-1189 CONTAINER LOADING CRANE TECHNICAL PARAMETERS: TYPICAL QUAYSIDE CRANE 1. A: GANTRY SPAN: 15000 TO 35000mm 2. C: BACKREACH: 0 TO 25000mm 3. E: CLEARANCE UNDER SILL BEAM: 12000 TO 18000mm 4. G: TRAVEL WHEEL GAUGE: 18200mm 5. H: BUFFER TO BUFFER: 27000mm 6. WHEEL SPACING: 1000 TO 2000mm 7. WHEELS PER CORNER (DEPENDS ON REQUIRED WHEEL LOADS): 6/12 – SEASIDE 8. WHEELS PER CORNER (DEPENDS ON REQUIRED WHEEL LOADS): 6/12 – LANDSIDE 9. MAX. WIDTH TROLLEY AND MAIN BEAM/BOOM: 7600mm Learn More

REFERENCE NUMBER: T-6550

MEDICAL PROTECTIVE CLOTHING BLOOD SYNTHETIC PENETRABILITY TESTER

 

TECHNICAL SPECIFICATIONS AND CONFIGURATION:

1. THE INSTRUMENT ADOPTS AN AIR SOURCE THAT CAN PROVIDE (0.5 ~ 30±0.1) KPA PRESSURE TO CONTINUOUSLY PRESSURIZED THE SAMPLE, WHICH IS NOT RESTRICTED BY THE SPACE OF THE TEST SITE;

2. THE AIR PRESSURE RANGE CAN BE ADJUSTED FREELY, AND THE ADJUSTMENT RANGE (0.5 ~ 30) KPA;

3. COLOR TOUCH SCREEN DISPLAY AND OPERATION;

4. THE SAMPLE CLAMPING PAD IS PROCESSED WITH IMPORTED SPECIAL ALUMINUM PROFILES, WHICH IS LIGHT IN MATERIAL, CLEAN IN SURFACE AND NEVER RUSTS.

5. THE INSTRUMENT ADOPTS IMPORTED SPECIAL ALUMINUM WIRE DRAWING PANEL, EQUIPPED WITH METAL KEYS, SENSITIVE OPERATION, NOT EASY TO DAMAGE;

6. CLAMPING DEVICE FOR INSTRUMENT SAMPLES, EQUIPPED WITH LOCKING PROTECTION, TO PREVENT THE SYNTHETIC BLOOD FROM SPLASHING AROUND;

7. CLAMPING FORCE IS ACCURATE AND RELIABLE;

8. THE TEST TANK IS EQUIPPED WITH A SPECIAL PLACEMENT DEVICE, WHICH IS CONVENIENT FOR CUSTOMERS TO OPERATE;

9. THE TEST TANK IS PROCESSED WITH SPECIAL 316 STAINLESS STEEL, AND THE TOP IS EQUIPPED WITH A SPECIAL COVER FOR HIGH TRANSPARENT PROTECTION;

10. THE WASHER BELOW THE SAMPLE IS MADE OF HIGH-QUALITY PTFE MATERIAL AFTER SPECIAL PROCESSING;

11. SQUARE METAL BLOCK NET: OPEN SPACE ≥50°%; BENDING ≤5mm AT 30KPA;

12. INSTRUMENT TIME CONTROL ACCURACY ≤01 SECONDS;

13. THE SHELL OF THE INSTRUMENT IS MADE OF HIGH-QUALITY METAL BAKING PAINT, WHICH IS BEAUTIFUL AND GENEROUS.

14. EQUIPPED WITH PRINTER INTERFACE, CONNECTED TO THE PRINTER CAN DIRECTLY PRINT DATA REPORTS.

 

TECHNICAL PARAMETERS:

1. SAMPLE SIZE: 75mm X 75mm

2. TEST AREA: 28.26 SQUARE CENTIMETERS

3. AIR PRESSURE ADJUSTMENT RANGE (0.5 ~ 30) KPA

4. EXTERNAL SIZE: 500mm X 500mm X 500mm (L X W X H)

5. WEIGHT OF THE INSTRUMENT: 40 KG

6. POWER SUPPLY: AC220V, 50HZ,SCOPE OF SUPPLY: 1. ONE MAIN MACHINE; 2. TWO PTFE GASKETS; 3. TWO ORDINARY WASHERS; 4. ONE METAL BLOCKING NET; 5. A SET OF SPECIAL LOCKING TOOLS; 6. ONE HIGH-QUALITY SILENT AIR PUMP, [NOTE: SAFETY PRODUCTION LICENSE IS NOT INCLUDED]. 7. EQUIPPED WITH PRINTER INTERFACE; 8. ONE SAMPLE TEMPLATE; 9. ONE PRODUCT CERTIFICATE; 10. ONE COPY OF PRODUCT OPERATION MANUAL.

 

OPERATION INSTRUCTION:

INSERT THE AIR PUMP OUTPUT PIPE INTO THE OIL AND WATER SEPARATOR OF THE INSTRUMENT AS REQUIRED (PRESSURE 0.1-0.3MPA).

AFTER SWITCHING ON THE POWER, THE STARTUP INTERFACE (NAME OF THE DEVICE) IS DISPLAYED.

PRESS THE "ENTER" BUTTON TO ENTER THE TEST INTERFACE, AS SHOWN IN THE FOLLOWING FIGURE:

CLICK "SETTING” BUTTON, GET INTO PARAMETER SETTING SCREEN, AS BELOW THIS SCREEN CAN SET THE SYSTEM TIME, DATE AND TESTING TIME, AFTER SETTING, CLICK "SAVE” BUTTON TO KEEP THE SETTING DATA. (NOTE: IT REQUIRES 5 MINUTES IN THE STANDARD)

 

QUANTITY: 1

Learn More

YARN SINGEING MACHINE
MODEL Q488
PRODUCT FEATURES:
FREQUENCY CONVERSION SPEED REGULATION DEVICE, CONVENIENT ADJUSTM
ENT WINDING LINEAR SPEED IS HIGH
TAPER TYPE CONE OR PLAIN CONE TYPE;
HIGH QUALITY OF METALLIC GROOVED DRUM THROUGH DYNAMICALLY BALANCED, GROOVED DRUM AXLE WITH HIGH
ACCURACY OF MANUFACTURE HAS PREMIX TYPE AIR/GAS MIXED BOX AND NEW TYPE BURNER, FLAME STABILIZATION, HIGH BURNING TEMPERATURE, EVEN
SINGEING, LOW GAS CONSUMPTION;
AUTOMATIC STOP MOTION
DUST BLOW-EXHAUST APPARATUS AND DUST REMOVAL BY VENTILATION DEVICE;
PLC CONTROL SYSTEM;

MAIN TECHNICAL PARAMETER:
EACH MACHINE HAS 72 SPINDLES (DOUBLE-FACED)
SPINDLE DISTANCE IS 288mm GAUGE, CAN BE PACKAGE, TAPER TUBE, PARALLEL TUBE;
TUBE SIZE, PAPER TUBE IS 3° 30
PLASTIC TUBE IS 5 ° 57′, WOODEN TUBE ISΦ 25.4 × 147.5 × Φ 8.4
GROOVE DRUM MATERIAL IS ALUMINIUM ALLOY  
WINDING SPEED 200 TO 750mm, 200 TO 8200mm
MOTOR POWER 14.14KW
DIMENSIONS (LWH) 13117 × 1850 × 2840mm
MACHINE WEIGHT: 4550 KGS

QUANTITY: 1

Learn More

REFERENCE NUMBER: K-4730 MATTRESS VACUUM COMPRESSING LINE THIS MACHINE IS PREPARED WITH AUTOMATIC CYCLES TO REMOVE WORKERS AND REDUCE PRODUCTION TIME FROM EDGING UP TO PACKAGING OR ROLLING VACUUM. COULD BE DONE HIGH SPEED VERSIONS FOR 4 MATTRESSES PER MINUTE. QUANTITY AVAILABLE: 1 Learn More

INVENTORY NUMBER: E-4553 FOAM MACHINERY FOR SALE QUANTITY AVAILABLE: 33 LOTS Learn More

TT-4766 SCHRAMM T685WS-C DRILLING RIG, YEAR 2008 SCHRAMM T685WS-C DRILLING RIG CONDITION USED YEAR 2008 QUANTITY: 1 Learn More

YY-2356 CHAMP DISTILLATE SPRAY GUN SPRAY HEATED MOLTEN DISTILLATE MATERIAL WITH SPEED, ACCURACY AND LOW MAINTENANCE. CHAMP DISTILLATE SPRAY GUN ELIMINATES THE NEED FOR ADDITIVES. CUSTOMER TO PROVIDE COMPRESSED AIR ( 3.5 SCFM AT 80PSI). QUANTITY: 1 Learn More

REFERENCE NUMBER: M-7677
HIGH SPEED ALUMINUM NESPRESSO FILLING SEALING MACHINE
TECHNICAL PARAMETERS:
MODEL #1:
SPEED: 8,500 TO 9,600 CUPS PER HOUR
WORKING STATION: 4 LANES
MACHINE SIZE (LxWxH): 5000mm x 1000mm x 2600mm
MODEL #2:
SPEED: 4,000 TO 4,800 CUPS PER HOUR
WORKING STATION: 2 LANES
MACHINE SIZE (LxWxH): 5000mm x 900mm x 2600mm

Learn More

REFERENCE NUMBER: F-1228 EPS MOLDING PRODUCTION LINE FOR BOX/CONTAINER/TRAY WITH THREE MOLDS (NEW) CONSIST OF: 1. EPS BATCH PRE-EXPANDER TYPE SJ1100 2. AUTOMATIC SHAPE MOLDING MACHINE WITH VACUUM SZ172 3. EPS MOULD FOR SZ172 MOLDING MACHINE 4. AUXILIARY EQUIPMENT QUANTITY AVAILABLE: 1 Learn More