Search results for: 'bla''

TT-2004 INFOTEC 2424 C FOAM CONTOUR CUTTING MACHINE CNC, YEAR 2022 MACHINE TYPE: CONTOUR CUTTING MACHINE CNC, FOR FOAM BRAND: INFOTEC MODEL: INFOTEC 2424 C FOAM YEAR OF CONSTRUCTION: 2022 CONDITION: NEW THE CONTOUR CUTTING MACHINE CUTS A VARIETY OF SHAPES FROM FLEXIBLE POLYURETHANE FOAM BLOCKS. USED IN THE MANY INDUSTRIES, ESPECIALLY IN THE PRODUCTION OF UPHOLSTERED FURNITURE AND MATTRESSES. FOR CUTTING FOAM BLOCKS WITH A MAXIMUM SIZE OF: 2400 X 2400 X 1300mm. THE MACHINE IS EQUIPPED WITH A ROTARY TABLE, WHICH MAKES IT POSSIBLE TO CUT OUT ANY COMPLEX SPATIAL SHAPES. IT CAN ALSO SLICE BLOCKS OF FOAM AS A VERTICAL OR AS HORIZONTAL MACHINE DOES. Learn More

J-4711 MANUAL VERTICAL CUTTING MACHINE FOR RIGID MATERIALS – WILL CUT CARDBOARD QUANTITY: 1 Learn More

TT-1726 POLYPROPYLENE TAPE LINE EXTRUDER 15 TONS DAILY CAPACITY, 264 WINDERS, YEAR 2012 POLYPROPYLENE TAPE LINE EXTRUDER 15 TONS DAILY CAPACITY CONDITION: USED MODEL: POLYPROPYLENE TAPE LINE EXTRUDER CAPACITY: 15 TONS DAILY CAPACITY YEAR: 2012 QUANTITY: 1 Learn More

YY-2003 PET PAD MAKING MACHINE, 100 PADS PER MINUTE TECHNICAL PARAMETERS: 1. POWER SUPPLY: 380V/50Hz OR 220V 50/60Hz 2. POWER: 80KW (INCLUDE A HOT MELT GLUE MACHINE） 3. STABLE SPEED: 0 TO 50 METERS PER MINUTE（5 LAYERS） 4. DIMENSION: LENGTH 20000 X WIDTH 5000 X HEIGHT 3500mm 5. WEIGHT: 13T 6. YUNG PRESS: ≥0.6MPA 1.2M³/MIN 7. PRODUCTS’ SPECIFICATIONS: WIDTH（300 TO 600mm), LENGTH（400 TO 1000mm） 8. THE CORE SIZE: WIDTH（300 TO 500MM), LENGTH（400 TO 800mm） 9. SAP WEIGHT: 10 TO 50G/㎡ 10. WOODEN PULP WEIGHT: 40 TO 110G/㎡ 11. AUTOMATIC TENSION CONTROL 12. SINGLE SAP APPLICATOR 13. ABSORBENT CORE PREPARATION UNIT 14. ABSORBENT LAYER CROSS CUTTING UNIT 15. BACK SHEET APPLICATION AND EDGE FOLDING UNIT 16. HOT MELT GLUING UNIT 17. FINISHED PRODUCTS EMBOSSING UNIT 18. WIDTH FOLDING UNIT 19. FINISHED PRODUCTS CUTTING UNIT 20. LENGTH FOLDING UNIT DELIVERY TIME: 100 DAYS QUANTITY: 1 Learn More

T-9675 SPROUT WALDRON GRINDER, 150 HP THE ORIGINAL HOPPER OF THIS GRANULATOR WAS 8″ X 36″ BUT THE OPENING OS 20″ X 36″ QUANTITY: 1 Learn More

YY-1834 AUTOMATIC ANGLE FOAM CUTTING MACHINE WITH CONVEYOR, CUTTING ANGLE 16 TO 60° THE MACHINE IS WITH TOUCH SCREEN & PLC AUTO CONTROL, THE CUTTING BLADE CAN MOVE UP & DOWN AUTOMATICALLY, WITH AUTOMATIC CONVEYOR AND POSITIONING BAR TO LOAD THE FOAM SHEET. WITH MOTOR TO ADJUST THE ANGLE, WITH A METER TO SHOW THE ANGLE WITH TOUCH SCREEN AND MOTOR TO CONTROL THE BELT AND BLADE FRAME UP AND DOWN, AND VACUUM MOTOR TO SUCK THE FOAM SHEET DOWN. HOT NEW FEATURE: CONVEYOR HAS PERFORATIONS AND MATERIAL BEING CUT STAYS STABLE IN ITS POSITION DUE TO THE SUCTION MOTOR PROVIDING SUCTION THROUGH CONVEYOR PERFORATIONS, ALLOWS MACHINE TO GIVE CLEAN CUTS EVERY TIME. QUANTITY: 1 Learn More

V-2003 DOUBLE SHAFT SHREDDER, TWO MOTORS, TOTAL 11KW, 1200mm (48 INCHES) WORKING WIDTH FOR DENSE PLASTIC WASTE SUCH AS INJECTION PLASTIC WASTE, ONE 5.5KW MOTOR FOR EACH OF THE TWO ROLLS (ONE ON EACH SIDE) QUANTITY: 1 Learn More

J-4019 DELL’ORCO TEARING LINE, MODEL M-1000-1, WIDTH 1000mm, SINGLE CYLINDER CURRENTLY INSTALLED AND UNDER POWER LAST USED IN ZIPPER AND BUTTON LINE MUST BE SOLD WITH THE CUTTERS QUANTITY: 1 Learn More

T-8540 WET WIPES MACHINE, CAPACITY 30 TO 120 PIECES PER PACK WET WIPES MACHINE CAPACITY: 30 TO 120 PIECES PER PACK DRIVE MODE: AUTOMATIC STABLE SPEED: 3500 TO 4800 PIECES PER MINUTE (25 TO 60 BAGS) MACHINE SIZE (L X W X H): 12200 × 2400 × 2200mm QUANTITY: 1 Learn More

T-8260 ALBRECHT BAUMER IS-M, 40 METERS PER MINUTE, CUT HEIGHT 1300mm, YEAR 1987 MAKE: ALBRECHT BAUMER MODEL: IS-M SPEED: 0 TO 40 METERS PER MINUTE CUTTING HEIGHT: 1300mm KNIFE MEASUREMENTS: 10 x 0.45 x 10350mm POWER SUPPLY: 380 VOLTS, 3-PHASE, 50 Hz POWER REQUIREMENT: 4 KW YEAR: 1987 RIGHT TABLE: 2435mm BUN WIDTH (RIGHT TABLE): 2200mm BUN LENGTH: 2580mm LEFT TABLE: 2435mm BUN WIDTH (LEFT TABLE): 2200mm BUN LENGTH: 2580mm) QUANTITY: 1 Learn More