Search results for: '501-1'

BEIGE KING ZIPPER

QUANTITY: 5

 

TWIN 222” #841 SNOW WHITE ZIPPER

QUANTITY: 188

 

FULL 252” #841 SNOW WHITE ZIPPER

QUANTITY: 150

 

FULL XL 262” #841 SNOW WHITE ZIPPER

QUANTITY: 12

 

SHORT QUEEN 264” #841 SNOW WHITE ZIPP

QUANTITY; 160

 

QUEEN 274” #841 SNOW WHITE ZIPPER

QUANTITY: 626

 

QUEEN XL 282” #841 SNOW WHITE ZIPPER

QUANTITY: 50

 

KING 306” #841 SNOW WHITE ZIPPER

QUANTITY: 492

 

TWINXL 232” #501 WHITE ZIPPER

QUANTITY: 51

 

FULL 252” #501 WHITE ZIPPER

QUANTITY: 245

 

FULL XL 262” #501 WHITE ZIPPER

QUANTITY: 198

 

QUEEN 280” GREEN 0089890 CIFOL-56 DA86 E ¾ #826 ZIPPER

QUANTITY: 42

 

QUEEN XL 282” #501 WHITE ZIPPER

QUANTITY: 250

 

KING 306” #501 WHITE ZIPPER

QUANTITY: 115

 

KING 306” GREEN 0089890 CIFOL-56 DA86 E ¾ #826 ZIPPER

QUANTITY: 188

 

KING 306” 0089890 CIFOL-56 DA86 E ¾ #523 (MBA) ORANGE ZIPPER

QUANTITY: 265

 

QUEEN 280” (MBA ORANGE) 0089890 CIFOL-56 DA86 E ¾ #523 ZIPPER

QUANTITY: 215

 

KING 306” 0089890 CIFOL-56 DA86 E ¾ #298 (MBA) BLUE ZIPPER

QUANTITY: 30

 

QUEEN 280” (MBA BLUE) 0089890 CIFOL-56 DA86 E ¾ #298 ZIPPER

QUANTITY: 95

 

QUEEN 280” YELLOW 0089890 CIFO-56 DA86 E3/4 #504 ZIPPER

QUANTITY: 21

Learn More

TT-5191 CATERPILLAR 3616 MARINE GENSET, 4600KW, 10 HOURS, YEAR 2010, 60Hz, DIESEL OIL CATERPILLAR 3616 YEAR: 2010 HOURS: 10 POWER: 4600KW VOLT: 11200V FREQUENCY: 60Hz FUEL: DIESEL OIL MARINE GENSET WITH RADIATOR WITH SPECIFCATION BOOK/MANUAL BOOK DELIVERY TIME: TWO WEEKS QUANTITY: 8 Learn More

REFERENCE NUMBER: L-5110

COMPLETE HANK DYEING AND MERCERIZING PLANT

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-5010 (12123GHBLSD11UN) L COMPLETE GLASS FIBER PROCESSING LINE FIBER PREPARATION & WEB FORMING EQUIPMENT CURING OVEN WITH ALL AUXILIARY EQUIPMENT, CROSS CUTTER, STACKER, AND WINDER RECUPERATIVE THERMAL OXIDIZER (RTO) TO TREAT OVEN EXHAUST DUST FILTRATION SYSTEM WITH RECYCLING OF FIBER AND RESIN PHENOLIC POWDER RESIN SUPPLY SYSTEM COMPLETE ELECTRIC CONTROL SYSTEM (SIEMENS S 7) FIBER BLEND CAPABILITIES: GLASS FIBER E GLASS UP TO STAPLE LENGTH OF 3 1/4 INCH 100% GLASS FIBER BLENDS WITH ANY MAN MADE FIBERS SUCH AS PET-PA OR RAYON GLASS FIBER BLENDS WITH ANY OF THE ABOVE PLUS ORGANIC FIBERS SUCH AS CELLULOSE, WOOD, NEWSPAPER, COTTON, AND ALL NATURAL FIBERS BI-CO FIBERS USED AS BINDER FIBER WITH A STAPLE LENGTH OF 2 INCHES AND A DTEX RANGE FROM 3 TO 10 MINIMUM BLEND RATIO IS 8% FOR EACH FIBER COMPONENT BLEND ACCURACY WITH THE USE OF OUR CONTROLS AND WEIGHING SYSTEM AS OFFERED +/- 2% WEB FORMING CAPABILITES: MINIMUM WEIGHT WITH 100% GLASS FIBER IS 35 TO 40 G/FT² MAXIMUM WEIGHT WITH 100% GLASS FIBER IS 300 G/FT² PRODUCT LOFT WITH 100% GLASS FIBER AT LOWEST WEIGHT AND FIBER LENGTH OF 3 INCH IS 45 TO 55 mm PRODUCT LOFT WITH 100% GLASS FIBER AT HIGHEST WEIGHT IS 250 mm PRODUCT WEIGHT ACCURACY IF OUR WEIGHT AND CONTROL SYSTEM IS IN USE WILL BE +/- 3% IN MACHINE & CROSS MACHINE DIRECTION FIBER DISTRIBUTION AND PRODUCT APPEARANCE AT LOWEST WEIGHT +/- 5% (WINDOWS AND CLOUDS) PHENOLIC RESIN CAPABILITIES: POWDER INTRODUCTION RATE INTO THE WEB FORMER IS MIN OF 10% AND A MAX OF 40% TRADITIONALLY THE AMOUNT OF BINDER RESIN IN USE IS BETWEEN 18 TO 22% IN RELATION TO THE FIBER WEIGHT POWDER DISTRIBUTION WITHIN THE PRODUCT AT AN ACCURACY OF +/- 3% PRODUCTION CAPACITIES PER HOUR WITH A MAXIMUM WORKING WIDTH OF 110 INCHES: WITH THE LOWEST PRODUCTION WEIGHT OF 35 TO 40 G/FT² 14 M/MIN AND 1,660 LB/HR WITH A PRODUCT WEIGHT OF 100 G/FT² 16 M/MIN OR 52 FT/MIN AND 4,000 LB/HR HIGHER PRODUCT WEIGHT (E.G.) 200 G/FT² 8 TO 9 M/MIN OR 26 TO 30 FT/MIN AT 4,000 LB/HR THESE PRODUCTION NUMBERS ARE CONSERVATIVE AND BASED ON ACTUAL TRIALS AND EXPERIENCE THE REAL PRODUCTION OUTPUT PER HOUR CAN BE INCREASED WHEN LOWER QUALITY EXPECTATIONS ARE ACCEPTED AND THE OPERATORS HAVE ACQUAINTED THEMSELVES WITH THE FEATURES OF THE EQUIPMENT QUANTITY: 1 Learn More

TT-7334 COMPLETE LAMINATING LINE, YEAR 2012 TO 2023 Learn More

TT-7050 ROLLS ROYCE GAS TURBINE, 4 MW, YEAR 1999, YEAR 2011, NATURAL GAS, CORE ENGINE 1. YEAR OPERATIONAL PERIOD: 1999 TO 2011 2. TOTAL RUNNING HOURS: 39,500 HOURS 3. BRAND: ROLLS ROYCE - ALLISON 4. TYPE: 501 KB5S-LE4 5. ASSEMBLED/ENCAPSULATED BY: TURBOMECA (FRANCE) 6. ABSORBED POWER (GAS): 13.6 MW 7. FUELS/OXIDIZER: NATURAL GAS AT 19 BAR, AIR (FILTERED) QUANTITY: 1 Learn More

REFERENCE NUMBER: T-6843 SPINNBAU NONWOVEN LINE, YEAR 1994 BRAND: SPINNBAU SHORT DESCRIPTION: NONWOVEN LINE YEAR: 1994 NONWOVEN LINE CONSISTING OF 1. CARD FEEDING: CARD FEEDING R&S, NEW, IN 2500mm WORKING WIDTH, CONSISTING OF: ONE R&S MATERIAL BIN IN 2500mm WORKING WIDTH, 600mm DEPTH AND A COMPLETE HEIGHT OF 2500mm, WITH TOP AND BOTTOM WINDOW AT BOTH SIDES, FILLING LEVEL CONTROLLED BY IN HEIGHT ADJUSTABLE INFRARED DEVICES. ONE DOOR AT THE BACKSIDE FOR CLEANING, LOCKED BY SECURITY SWITCHES. THE VITIATED AIR ESCAPES THROUGH THE PERFORATED SHEETMETAL AT THE TOP. THESE AREAS ARE COMPLETELY COVERED, THE OUTGOING AIR CAN BE FILTERED BY AN EXCISTING FILTERSTATION OR OPTIONALLY BY FILTERBAGS, 2 DELIVERY ROLLERS. ONE R & S CHUTE FEEDER IN 2500mm WORKING WIDTH CONSISTING OF: ONE OPENING ROLLER DIAMETER 450mm, ONE VIBRATION CHUTE, FIBRELEVEL CONTROLLED BY ULTRASONIC, CHUTE ADJUSTABLE OVER TOOTH RAILS IN DEPTH FROM 80 TO 240mm, TWO DRAWING OFF ROLLERS, ONE FEEDING TABLE WITH TRANSILON BELT, PREPARED FOR SERVOLAP. DRIVES: DELIVERY ROLLERS: AC -GEARBOXMOTOR 0.55 KW, FC OPENING ROLLER: AC-MOTOR 2.2 KW VIBRATION: AC-GEARBOXMOTOR, 0.55 KW, FC FEEDING TABLE: AC-GEARBOXMOTOR, 0.55 KW, FC 2. CARDING; ONE SPINNBAU DOUBLE DOFFER CARD, IN 2500mm WORKING WIDTH, YEAR 1994: CARD, FOLLOWING EQUIPPED: 1 CYLINDER FEEDING DEVICE WITH FEED PLATE: 1 FEED ROLLER DIAMETER 159mm 1 LICKER-IN DIAMETER 292mm PRE-OPENING: 1 BREAST DIAMETER 412mm 1/1 WORKER/STRIPPER DIAMETER 213/118mm 1 INTERMETE ROLLER DIAMETER 412mm CARD: 1 MAIN CYLINDER DIAMETER 1500mm 5/5 WORKERS/STRIPPERS DIAMETER 213/118mm 1 DOFFER, TOP DIAMETER 550mm 1 DOFFER, BOTTOM DIAMETER 550mm 2 CONDENSING ROLLERS TOP DIAMETER 292mm TOP DRAWING OFF DEVICE, NEW: 1 DRAWING OFF ROLLER/WIRED DIAMETER 159mm 1 DRAWING OFF ROLLER/STEEL RUBBER: DIAMETER 159mm 1 CLEANING ROLLER WITH INTEGRATED ELECTRONIC, WHEN DIAMETER OF CLEANING IS GETTING BIGGER, CARD WILL STOP. BOTTOM DRAWING OFF DEVICE, NEW: 1 DRAWING OFF ROLLER/WIRED DIAMETER 159mm 1 DRAWING OFF ROLLER/STEEL RUBBER: DIAMETER 159mm 1 CLEANING ROLLER WITH INTEGRATED ELECTRONIC, WHEN DIAMETER OF CLEANING IS GETTING BIGGER, CARD WILL STOP. DRAWING OFF TABLES: TOP TRANSILON BELT BOTTOM: TRANSILON BELT COVERS: THE CARD HAS COVERS TO CLAP UP AND DOWN (SECURED WHEN CLAPPED UP), THE SIDES ARE FULLY COVERED AND ELECTRONICALLY LOCKED. RIGID WIRE: ONE COMPLETE SET OF RIGID WIRE, MOUNTED, FOR FIBRES 1.5 DTEX - 17 DTEX, CAPACITY UP TO 800 KG/H ELECTRIC: VOLTAGE: ~400 V AC, 3 PHASES CONTROL VOLTAGE: ~220 V AC, =24V DC FREQUENCY: 50 Hz COLOUR: MACHINE: RAL 5015/ 9001 (IF YOU LIKE WE CAN CHANGE) CONTROL CABINET: RAL 7032, GREY SWITCH BOARD: RAL 7032, GREY ELECTRICAL DRIVES: FEED ROLLER: 1 AC GEARBOXMOTOR, FREQUENCY CONTROLLED LICKER-IN: MECHANICAL FROM BREAST BREAST: 1 AC GEARBOXMOTOR, FREQUENCY CONTROLLED WORKERS BREAST: MECHANICALLY FROM BREAST INTERMEDIATE ROLLER: MECHANICALLY FROM MAINSWIFT MAIN SWIFT: 1 AC-MOTOR FREQUENCY CONTROLLED WORKERS: 1 AC GEARBOXMOTOR, FREQUENCY CONTROLLED DOFFERS: 2 AC GEARBOXMOTORS. FREQUENCY CONTROLLED CONDENSING ROLLERS: 1 AC GEARBOXMOTORS. FREQUENCY CONTROLLED DRAWING-OFF DEVICES: 2 AC GEARBOXMOTORS. FREQUENCY CONTROLLED DRAWING-OFF TABLES: 2 AC GEARBOXMOTORS, FREQUENCY CONTROLLED SWITCHBOARDS AND CONTROLS: SWITCHBOARDS RITTAL SERIES, COMPLETE WIRED. SWITCHBOARDS WITHOUT COOLING DEVICES. CONTROL CABINET OPERATION WITH COLOURED SCREEN, FITTED IN CONTROL CABINET OPERATED BY SIEMENS SPS S7-300 1 SET OF CABLE MATERIAL: FOR 20 MTR LENGTH BETWEEN MACHINERY AND SWITCHBOARD WITHOUT INSTALLATION MATERIAL ERECTION AND STARTING UP: IS NOT INCLUDED, SHOULD BE MADE BY US FOUNDATION: ONE FOUNDATION IN 750mm HEIGHT, WITH SIDEWALKS AROUND, TWO STEPS ON EACH SIDE. SUCTION: CONNECTION FOR THE DOFFER AND TOP OF CARD 3. CROSSLAPPING, NEW: ONE REISKY & SCHLESE CROSSLAPPER, TYPE RS 100 IN 2500mm WORKING WIDTH (BELT WIDTH 2800mm) AND 2500mm LAPPING WIDTH (BELT WIDTH 2700mm) MAX INFEEDING SPEED: 100 MTR/MIN, DELIVERY SPEED OF DRAWING OFF TABLE: FROM 0 TO 20 MTR/MIN, CONSISTING OF: ONE FEEDING TABLE IN 1000mm LENGTH MOUNTED IN IT'S OWN FRAME, ADJUSTABLE IN THE HEIGHT ACCORDING TO THE DOFFER, FURTHER THE COMPLETE FEEDING TABLE CAN BE MOVED UP IF THE DOFFER HAS TO BE DRAWN BACK. THE CROSSLAPPER ITSELF GUIDES THE WEB FROM THE INFEED DOWN TO THE OUTLET BETWEEN THE CONVEYORS, WHICH HAVE ANTISTATIC PROPERTIES. THE TENSION AND THE DISTANCES BETWEEN THEM CAN BE ADJUSTED ACCORDING TO THE DIFFERENT FIBRES. THE CONVEYORS ARE EQUIPPED WITH AUTOMATIC EDGE GUIDES, SO THAT THEY ARE RUNNING IN THE CENTRE. THE LAID WEB IS COVERED BY THEM. THE SERVO- DRIVES ARE RESPONSIBLE FOR THE PERFECT SYNCHRONISATION AND THE EXACT REVERSAL OF THE CARRIERS. THE SWITCHBOARD IS EQUIPPED WITH A COULOURED TOUCHSCREEEN, WHERE ALL NECESSARY PARAMETERS CAN BE PROGRAMMED, ALSO DIFFERENT CURVES FOR STORING THE WEB DURING REVERSALS. DRIVES: FEED TABLE: AC-SERVO-MOTOR BELT 1: AC-SERVO-MOTOR BELT 2: AC-SERVO-MOTOR TOP CARRIER: AC-SERVO-MOTOR BOTTOM CARRIER: AC-SERVO-MOTOR DRAWING OFF TABLE: AC-SERVO-MOTOR HEIGHT DRAWING OFF TABLE LEFT: AC-LINEARMOTOR HEIGHT DRAWING OFF TABLE RIGHT: AC-LINEARMOTOR OPERATION: BY COLOURED TOUCHSCREEN, SIEMENS IN CONTROL CABINET OF CARD. PARAMETERS: MANUEL / INLINE INFEED SPEED DRAFT (INFEED SPEED/LAYING SPEED) NUMBER OF LAPS LAPPING WIDTH FROM MIDDLE TO THE LEFT AND TO THE RIGHT DRAWING OFF SPEED AUTOMATICALLY SHOWN DEPENDING ON LAYERS DARWING OFF TABLE HEIGHT LEFT / RIGHT LAYING SPEED RECEIPES FAULT SHOWING SWITCHBOARD AND ELECTRONIC DEVICES: SWITCH BOAD RITTAL, COMPLETE WIRED. SWITCHBOARD WITHOUT COOLING DEVICE. CONTROL PANNEL RITTAL. CONTROLLED BY S7 SIEMENS 10000mm OF CABLES BETWEEN SWITHBOARD AND MACHINE/CONTROLPANEL QUANTITY: 1 Learn More

REFERENCE NUMBER: M-5221 (1313565TNY12RX) L
NONWOVEN LINE WIDTH 2500mm

CARD FEEDING
CARDING

QUANTITY AVAILABLE: 1

Learn More

TT-8118 SAURER 400 WEAVING MACHINE, WORKING WIDTH 2000mm 1. SAURER 400 WEAVING MACHINE 2. WORKING WIDTH 2000mm 3. THE LOOMS ARE 8 COLORS (5 -6 OF THIS ARE 6 COLORS) 4. CAPACITY OF THE DOBBY 24 CAMSHAFT Learn More

TT-6644 CENTRAX GAS TURBINE GENERATOR, 2.5MW, YEAR 1981 1. COMPLETE GAS TURBINE GENERATING SYSTEM 2. TOTAL RUNNING HOURS: 1546 QUANTITY: 1 Learn More