Search results for: 'energy'

TT-8553 GE TM2500+ GEN 6 DUAL FUEL (NATURAL GAS & DIESEL) TURBINE GENERATOR, 29 MW, YEAR 2012, 50-60 Hz 1. GE TM2500+ GEN 6 DUAL FUEL (NATURAL GAS & DIESEL) TURBINE 2. THIS UNIT DELIVERS FAST, MOBILE POWER, ENSURING A STABLE ENERGY SUPPLY DURING OUTAGES. 3. MOUNTED ON A TRAILER FOR QUICK DEPLOYMENT, IT'S IDEAL FOR BASE LOAD BRIDGING, DISASTER RELIEF, PLANT SHUTDOWNS, AND MAINTENANCE. 4. ITS RELIABLE PERFORMANCE GUARANTEES POWER WHENEVER AND WHEREVER IT IS NEEDED QUANTITY: 1 Learn More

TT-7849 JENBACHER JGS 620F GENERATOR SYSTEM, 6.712 MW TOTAL, 11KV, 20K/23K HOURS, NATURAL GAS, 2012 1. USED JENBACHER GENERATOR SYSTEM 2. CONSISTING OF (2) MODEL JGS 620F JENBACHER NATURAL GAS GENSETS 3. EACH RATED 3.356 MW; 2.9 MW NET OUTPUT; 1500 RPM; 3/50/11KV 4. YEAR BUILT 2012 5. REPORTED 20,000 HOURS AND 23,000 HOURS. CONTROLLED BY (1) PANEL. 6. BRAND: JENBACHER 7. MODEL: JGS 620F 8. USED EQUIPMENT FACTS ABOUT THIS MACHINE 9. FUEL TYPE: NATURAL GAS QUANTITY: 1 Learn More

TT-5316 JENBACHER JW 612 GENERATOR SET, 50 Hz, YEAR 1991 BRAND: JENBACHER GENERATOR SETS MODEL: JW 612 GS CONDITION: USED YEAR: 1991 QUANTITY: 1 Learn More

TT-2909 PROBAT 23R ACO ROASTING PLANT, 240 KILO, YEAR REFURBISHED 2018 PROBAT-BURNS ACCLAIMED 23R ACO COFFEE ROASTING PLANT 4-BAG COFFEE ROASTING PLANT PROBAT-BURNS MODEL 23R “ACO” (AUTOMATIC CLEAN OUT) CAPACITY IS REPORTED TO BE 200 TO 540 LBS. (90 TO 240 KG) @ 4-5 BATCHES PER HOUR (NOMINAL). THAT'S UP TO 2,500 LBS. (1,134 KG) PER HOUR THIS MACHINE HAS ONLY RAN 3 HOURS P/DAY FOR LESS THAN 3 YEARS SINCE PUT ONLINE AFTER COMPLETE REFURBISH IN 2018. THIS EQUIPMENT SET IS CURRENTLY DECOMMISSIONED AND DISASSEMBLED SITTING ON PALLETS, READY FOR FREIGHT PREP AND SHIPPING. COMPLETELY REFURBISHED IN 2018, IT HAS BEEN OFFLINE FOR ABOUT 9 MONTHS. IT'S IN EXCELLENT CONDITION, RUNS PERFECTLY. FUELED BY NATURAL GAS, POWERED BY 480 VOLT. THIS 23R ACO HAS MANUAL ROAST CONTROLS. CAN BE UPGRADED TO FULLY AUTOMATED Learn More

YY-2154 AUTOMATIC MATTRESS PROTECTOR SEWING MACHINE TECHNICAL DATA: 1. INCORPORATED PEGASUS OVERLOCK SEWING MACHINE, WITH HIGH SPEED AND STABLE PERFORMANCE. 2. DUAL MACHINE HEAD SYNCHRONOUS OPERATION, FREELY SWITCHABLE, INDEPENDENT OPERATION, OR RUN SYNCHRO - NOUSLY. 3. ELASTIC TENSION CONTROL STRUCTURE, AUTOMATIC GUIDE STRUCTURE, TO ENSURE ELASTIC SEWING AUTOMATION IS COMPLETED. 4. AUTOMATIC CORRECTION OF ALIGNMENT TO ENSURE THE SEWING PROCESS OF RUBBER BAND PERFECTLY & CONTINUOUS STITCHING. 5. PEDAL CONTROL SEWING SPEED, CUT AND STITCH TOGETHER, EXCESS EDGE MATERIAL CUT AND COLLECTED VIA ABSORPTION BIN. 6. SKIRT WIDTH SUPPORTS: 200 TO 500mm. 7. THREAD BREAKAGE DETECTION AND ALERT WITH ALARM. 8. THE MACHINE OCCUPIES SMALL SPACE, LOW POWER, AND SAVE ENERGY. 9. LARGE THREAD SPOOL HOLDER RACK IS OPTIONAL TO REDUCE FREQUENCY OF THREAT CHANGES. 10. CONSTANT TENSION CONTROL ENSURES THE STITCHING QUALITY OF ELASTIC SKIRT. APPLICATION: FOR MATTRESS PROTECTOR PRODUCTION, AUTOMATIC RUBBER BANDS SEWING, AUTO EDGE-ALIGNMENT, AUTO-FEEDING, DETECT MATERIAL, ETC. QUANTITY: 1 Learn More

A-2611 ULTRAVIOLET AGING TESTING CHAMBER BOX TYPE FLUORESCENT UV LAMP IS IMPORTED FOR THIS ACCELERATED AGING TEST CHAMBER. CAN SIMULATE HARM BY SUNLIGHT, RAINWATER AND DEW. UV WEATHER RESISTANCE CHAMBER USE FLUORESCENT UV LAMP TO SIMULATES THE EFFECT OF SUNLIGHT, CONDENSATION MOISTURE IS USED TO SIMULATE DEW. THE TESTED MATERIAL IS PLACED IN A LOOP PROGRAM THAT ALTERNATES LIGHT AND MOISTURE AT A CERTAIN TEMPERATURE. THE MATERIAL WAS TESTED FOR ACCELERATED WEATHERABILITY. UV CHAMBER CAN RE-CREATE HAZARDS THAT OCCUR OUTDOORS FOR MONTHS OR YEARS.THE TYPES OF HAZARDS INCLUDE: DISCOLORATION, CHALKINESS, POWDER LIGHT, CRACKING, TURBIDITY, BUBBLES, BRITTLE, STRENGTH, DECAY, OXIDATION, ETC. THIS MACHINE INCLUDES SPRAY DEVICE. Learn More

REFERENCE NUMBER: A-2487 165 KG CAPACITY SPLIT POCKET WASHER EXTRACTOR • 165 KG CAPACITY • SEPARATE 3 POCKET, PREVENTING LARGE ITEMS FROM GETTING ENTANGLED • HIGH WASHING QUALITY • EASY USING MACHINE • HIGHER OPERATOR COMFORT AND FASTER PREPARATION TIMES AT FLATWORK FINISHING SIDE • HEAVY DUTY CONSTRUCTION • OPTIMIZED ENERGY AND REDUCED COST • MAXIMUM EFFICIENCY WITH SUSPENSION SYSTEM AND NEW DRUM DESIGN WHICH PROVIDES ENERGY AND TIME SAVING FEATURES: • QUALITY WASHING PROCESS OPTIMIZING WATER, ENERGY AND CHEMICAL PRODUCTS • SAVING IN THE DRYING PROCESS DUE TO ITS SPIN FACTOR 350 G • WIDE - RANGING POSSIBILITIES WITH AN EASY PROGRAMMING • EXCELLENT WASH QUALITY WITH SPLIT DRUM STRUCTURE AND BREAKWATERS 50% LONGER LIFETIME THE TEXTILE WITH TEXTILES FRIENDLY DRUM STRUCTURE • QUITE AND PERFECT OPERATION WITH ELECTRONIC ANTI-BALANCE CONTROL • HIGH EXTRACTING FORCE • TEXTILE FRIENDLY WASHING MACHINE • FREE STANDING CONSTRUCTION WITH NEW DEVELOPED SPRING SYSTEM • DOOR DESIGN THAT PROVIDES WATER TIGHTNESS AND HEAT ISOLATION • NEW GENERATION TOUCH SCREEN CONTROLLER • AUTOMATIC DOOR POSITIONING SYSTEM • HIGH-GRADE STAINLESS STEEL INNER AND OUTER DRUM AND THE ENTIRE BODY SPECIFICATION: DRUM POCKET: 3 PCS CAPACITY: 165 KG / LOAD DRUM SIZE: Ø 1480 / 1000 mm DRUM VOLUME: 1720 LT MOTOR POWER: 30 KW EXTRACTING SPEED: 650 CYCLE / DK G FACTOR: 350 G STEAM HEATING POWER: 120 CYCLE / DK WIDTH: 2600 mm DEPTH: 1770 mm HEIGHT: 2450 mm NET WEIGHT: 4850 KG Learn More

C-3994 BARGEMOUNTED POWER PLANT, CAPACITY 220MW

A. ONCE THROUGH STEAM GENERATOR
B. BARGE
C. CHILLERS
D. AIR COMPRESSOR
E. GAS TURBINE
F. STEAM TURBINE
G. FEEDWATER SYSTEM
H. CLOSED COOLING WATER SYSTEM
I. AUXILIARY COOLING WATER SYSTEM
J. CONDENSATE POLISHING UNIT (CPU)
K. WASTE WATER SYSTEM
L. PLANT ELECTRICAL SYSTEM
M. BLACK START DG SET
N. PLANT CONTROLS AND INSTRUMENTATION
O. PLANT FIRE FIGHTING SYSTEM
P. START UP VACUUM SYSTEM
Q. STEAM TURBINE DEAERATING CONDENSER

QUANTITY: 1 PLANT

Learn More

M-6053 SPUNBOND PRODUCTION LINE, WORKING WIDTH 4040mm TO 4500mm

OFFER 001
SPUNBOND PRODUCTION LINE
WORKING WIDTH: 4040mm
WEIGHT: 130 TO 250 G/M2

OFFER 002
POLYMER CLEANING GROUP

OFFER 003
CRYSTALLIZING GROUP

OFFER 004
DRYING GROUP

OFFER 005
PNEUMATIC CONVEYING SYSTEM

OFFER 006
EXTRUDER HOPPER

OFFER 007
EXTRUDER

OFFER 008
FILTERING UNIT

OFFER 009
MELT TRANSFER LINE

OFFER 010
SPINNING BEAM

OFFER 011
SPINNING PACKS

OFFER 012
FILAMENTS QUENCHING SYSTEM

OFFER 013
FILAMENTS DRAWING AND DISTRIBUTION SYSTEM

OFFER 014
WEB FORMING CONVEYOR BELT

OFFER 015
CREEL FOR APPLICATION OF REINFORCING FILAMENTS

OFFER 016
PRE-NEEDLING MACHINE

OFFER 017
NEEDLING MACHINE

OFFER 018
THERMOSETTING UNIT

OFFER 019
OUTLET CALENDER

OFFER 020
FOULARD

OFFER 021
BINDER PREPARATION SYSTEM

OFFER 022
DRYER

OFFER 023
OUTLET CALENDER

OFFER 024
AUTOMATIC WINDER

OFFER 025
AIR COMPRESSORS (FOR FILAMENTS STRETCHING EJECTORS)

OFFER 026
DIATHERMIC OIL HEATING SYSTEM

OFFER 027
CHILLED WATER CIRCULATION AND GENERATION SYSTEM

OFFER 028
EQUIPMENT FOR CLEANING CYCLE, SPECIAL TOOLS

OFFER 029
FIBRE DUST RECOVERY SYSTEM

OFFER 030
EDGES RECOVERY SYSTEM

OFFER 031
SPINNING SECTION STEEL STRUCTURE

OFFER 032
DISTRIBUTION ELECTRIC CABINETS

OFFER 033
PROCESS ELECTRIC SYSTEM OF EXISTING MACHINES ACCORDING TO THE ACTUAL LAYOUT

OFFER 034
CABLES AND CABLING MATERIALS

QUANTITY: 1 LINE

Learn More

REFERENCE NUMBER: K-5046 CEMENT PLANT- 2 TO 3OO TONS PER HOUR PRODUCTION CAPACITY: 2-300T/H P MAKE: HENGRUI POWER(W): 10-600KW DIMENSION(LXWXH): VARY WEIGHT: 40 TO 800 TON CERTIFICATION: ISO9001 CE WARRANTY: 2 YEARS APPLICATION: METALLURGY, CHEMISTRY, BUILDING, REFRACTORY MATERIAL, ETC FOUNDATION: ACCORDING TO THE DRAWING INSTALLATION: ENERGY CONSUMPTION: LOW INTERNATIONAL LEADING WHEEL CATCH DEVICE HIGH PRECISION PLUNGER METERING PUMP ACCURACY SPEED QUANTITY AVAILABLE: 1 Learn More