Search results for: 'wood machine'

YY-2251 AIRLAID PRODUCTION LINE, FINAL PRODUCT WIDTH 2200mm ITEM 001 BALE OPENER (2 SETS) AND SEALED BALE OPENER (1 SET) ITEM 002 FIBER OPENING MACHINE (FOR LOW MELT FIBER OR PP) - 1 SET ITEM 003 PRE-OPENER – 1 SET ITEM 004 BIG CHAMBER BLENDER – 1 SET ITEM 005 MAIN-OPENER – 1 SET ITEM 006 VIBRATING FEEDER – 1 SET ITEM 007 CONDENSER – 2 SETS ITEM 008 AUTO-LEVER - 1 SET ITEM 009 AIR LAID MACHINE – 1 SET ITEM 010 AUTO-LEVER – 1 SET ITEM 011 BATT FEEDER – 1 SET ITEM 012 HIGH SPEED SINGLE SHAFT SINGLE BOARD PRE NEEDLE LOOM – 1 SET ITEM 013 HIGH SPEED SINGLE SHAFT SINGLE BOARD MAIN NEEDLE LOOM – 1 SET ITEM 014 DOUBLE BELT THERMAL-BONDED OVEN – 1 SET ITEM 015 DOUBLE-ROLLER CALENDER MACHINE – 1 SET ITEM 016 COOLING UNIT – 1 SET Learn More

T-9483 FULLY AUTOMATIC FOUR EDGE-SEALING GAUZE PACKING MACHINE TECHNICAL PARAMETERS: BAG SIZE: BASED ON CUSTOMER'S REQUEST SPEED: 120~180 BAGS/MIN PACKING MATERIAL: PAPER+PAPER, PAPER+PLASTIC IT CAN HOT SEALING PACKING MATERIAL, PACKAGE MATERIAL DIAMETER Φ ≤ 350mm, WIDTH IS BASED ON CUSTOMER'S REQUEST; VOLTAGE: 3P 380V 50Hz SERVO MOTOR 1.5 KW+SERVO MOTOR: 1 KW+STEPPING MOTOR 110 + STEPPING MOTOR 130 + VARIABLE FREQUENCY MOTOR 0.37KW, TOTALLY 5 MOTORS ARE 4KW USING 28 VOLT SERIES CIRCUIT HEAT, 2 HEATING PANELS, EACH PANEL HAVE 8 PCS HEATING TUBE, EACH TUBE 300W, TOTALLY 4.8KW MACHINE WEIGHT: 800 KG MACHINE SIZE: LENGTH 5000 X WIDTH 1300 X HEIGHT 1600mm WOODEN CARTON SIZE: LENGTH 2600 X WIDTH 1900 X HEIGHT 1800mm Learn More

REFERENCE NUMBER: M-5005 (1212WAJWHH11) L BALL FIBER MACHINE 300KG/H, 600KG/H CAN STILL CHANGE THE CAPACITY OF THIS MACHINE ACCORDING TO REQUIREMENTS OPERATION OF THE PRODUCTION LINE IS VERY SIMPLE: PUT THE FIBER OR THE COTTON ON THE OPENING MACHINE, THEN VIA THE OPENING MACHINE, CAN MAKE THE COTTON AND FIBER LOOSER (MORE OPEN) THAN BEFORE. THE BLOWER IS CONNECTED BETWEEN THE OPENING MACHINE AND THE BALL FIBER MACHINE IN ORDER TO SEND THE FIBER INTO THE BALL FIBER MACHINE. THE BALL FIBER MACHINE MAKES THE FIBER INTO FIBER BALL. ADVANTAGE OF THIS MACHINE: THIS MACHINE CAN SAVE ON THE COST OF LABOR. TWO BALL FIBER MACHINES CAN BE HANDLED BY ONE OPERATOR THAT CAN OPERATE THE OPENING MACHINE AND BALL FIBER MACHINE. THE POWER, 36.85KW/H. SMALL WORKING AREA, JUST NEED 5500mm x 3500mm x 2300mm (MODEL 002) BALL FIBER MACHINE USING RANGE: PILLOW, JACKET, QUILT PRODUCTIVITY: 160 TO 250KG/H (IF INCLUDING OPENING MACHINE, THE PRODUCTIVITY CAN BE UP TO 300KG/H) POWER: 17.75KW VOLTAGE: AS PER CUSTOMER REQUIREMENT WEIGHT: 1450KG DIMENSION OF BOX: 2500mm x 900mm x 1300mm (PACKAGING OPENING MACHINE AND DISTRIBUTION BOX) 2400mm x 1150mm x 1300mm (BALL FIBER MACHINE) TWO WOODEN CASES SHIPPING DIMENSION: 4500mm x 3500mm x 1500mm AN OPENING MACHINE, A BALL FIBER MACHINE, AND A BLOWER (MODEL 003) BALL FIBER MACHINE USING RANGE: PILLOW, JACKET, QUILT PRODUCTIVITY: 300 TO 400KG/H (PRODUCTIVITY CAN BE UP TO 600KG/H) POWER: 36.85KW VOLTAGE: AS PER CUSTOMER REQUIREMENT WEIGHT: 2300KG DIMENSION OF BOX: 2500mm x 900mm x 1300mm (OPENING MACHINE AND DISTRIBUTION MACHINE) 2400mm x 1150mm x 1300mm (BALL FIBER MACHINE) 2400mm x 1150mm x 1300mm (BALL FIBER MACHINE) THREE WOODEN CASES SHIPPING DIMENSION: 5500mm x 3500mm x 2300mm AN OPENING MACHINE, TWO BALL FIBER MACHINES, AND TWO BLOWERS QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-0593 DIGITAL DISPLAY ELECTRONIC UNIVERSAL TENSION TESTING MACHINE MAINLY APPLICABLE TO METALLIC, NONMETALLIC AND COMPOSITES TO TEST MECHANICAL PROPERTIES SUCH AS TENSION, COMPRESSION AND BENDING, ETC PRECISE AUTO CONTROL AND DATA ACQUISITION SYSTEM CAN REALIZE FULL DIGITAL ADJUSTMENT TO DATA ACQUISITION AND CONTROL PROCEDURE DURING TENSILE TEST, IT CAN TEST MAX. TENSION, TENSILE STRENGTH, ELONGATION STRAIN, ELONGATION, ETC ALL THESE PARAMETERS CAN BE AUTOMATICALLY CALCULATED THROUGH MAIN CONTROLLER ACCORDING TO TEST PARAMETERS WHICH ARE SET BEFORE TEST AND MEANTIME DISPLAY TEST RESULTS ALL TEST PARAMETERS CAN BE BOTH INQUIRED AND DISPLAYED AFTER TEST AND ALSO CAN BE PRINTED. THIS MACHINE IS ALSO APPLICABLE TO CEMENTING COMPOUND, TUBES, PIPES, AEROSPACE, PETROCHEMICAL INDUSTRY, WATERPROOF ROLLS, WIRES AND CABLES, TEXTILE, FIBERS, RUBBER, CERAMICS, FOOD, MEDICAL PACKING, GEOTEXTILE, FILM, WOOD, PAPER AND OTHER MANUFACTURING INDUSTRIES AND QUALITY SUPERVISION DEPARTMENTS QUANTITY AVAILABLE: 1 Learn More

YY-2245 AUTOMATIC ROTARY DIE CUTTER, MAXIMUM DIE CUTTING SIZE 2100 X 1200mm-FOR CORRUGATED CARDBOARD MAIN FUNCTION AND USAGE: FULLY COMPUTERISED ROTARY DIE CUTTING MACHINE WITH ADVANCED LEADING EDGE CARDBOARD FEEDING SYSTEM, (4 LINES WHEELS DESIGN), CARDBOARD FEEDING WITH HIGH PRECISION, FAST SPEED, CARDBOARD FEED WHEEL LIFE IS LONG, FEEDS CARDBOARD TO ACHIEVE 10000 PIECES/HOUR DESIGN SPEED IS 160 PIECES/MINUTE WORKING SPEED IS 120 PIECES/MINUTE DIE-CUTTING PRECISION OF ± 1mm. DOUBLE FREQUENCY CHANGER CONTROL, MAIN MOTOR AND DRAUGHT FAN. QUANTITY: 1 Learn More

CAPACITY: 100 TO 150 MASKS PER MINUTE
PRODUCES MASKS WITH 3 LAYERS OF POLYPROPYLENE NONWOVEN MATERIAL
AIR PRESSURE: 0.6 MPa, AIR CONSUMPTION 300 LITERS PER MINUTE
CONTROLLED BY PLC, OPERATED BY LCD TOUCH SCREEN
USES ULTRASONIC WELDING FOR EAR STRAPS
VOLTAGE: AS PER CUSTOMER
TOTAL POWER: 11 KW
DIMENSIONS: 6850 x 3520 x 1990mm
WEIGHT: ≤ 5000kg

MASK SURFACE LAYER, FILTER LAYER AND BOTTOM LAYER CAN BE ALIGNED AND FED TO THE MACHINE AUTOMATICALLY
BOTH SIDES ARE SYMMETRICAL WITH ULTRASONIC PROCESS STATIONS FOR EAR STRAP WELDING
AFTER WELDING, THE MASKS ARE COUNTED AND PILED TOGETHER AUTOMATICALLY
MASKS ARE DISTRIBUTED EVENLY TO TWO SETS OF EAR STRAP STATIONS BY AUTOMATIC TRANSMISSION SYSTEM, CONTROLLED BY PLC
NOSE CLIPS CAN BE AUTOMATICALLY FED, CUT AND ULTRASONICALLY WELDED

THE CUP TYPE MASK PRODUCTION LINE CAN BE SENT BY AIR, THERE ARE TOTAL 5 WOODEN CASES, SIZES AND WEIGHT AS BELOW:

1. 2500 X 1100 X 1000mm, 1PC, 250KGS
2. 2200 X 1000 X 1500mm, 1PC, 1100KGS
3. 3000 X 1200 X 1500mm, 1PC, 1100KGS
4. 3000 X 1200 X 1500mm, 1PC, 1100KGS
5. 1900 X 700 X 1150mm, 1PC, 250KGS

IF CUSTOMER NEEDS MASK BAGGING MACHINE TO CONNECT WITH DISPOSABLE MASK PRODUCTION LINE, THERE WILL BE ANOTHER TWO WOODEN CASES EXTRA, BUT WILL CANCEL THE FIFTH WOODEN CASE, SIZES AND WEIGHT AS BELOW:

1. 1580mm X 840MM X 1510 mm，1PCS, 340KG
2. 2540 mm X 540 mm X 1510 mm，1PCS, 80KG

Learn More

H-1261 GOOSE FEATHER CLEANING MACHINE

LIST OF COMPONENTS FOR THE GOOSE FEATHER CLEANING MACHINE:

1) RINSING MACHINE OF THE TYPE 2000 (STAINLESS STEEL USED FOR IT)
EXTERIOR DIMENSION: 4000×2000×2600×Ф1800MM
QUANTITY: 1

2) GOOSE FEATHER ADDING MACHINE
EXTERIOR DIMENSION: 4000×1800×3300MM
QUANTITY: 1

3) WATER TANK
EXTERIOR DIMENSION: Ф1930MM×2440MM
QUANTITY: 1

4) DEWATERING MACHINE FLAT PLATE TYPE (BEING EQUIPPED WITH VARIABLE FREQUENCY CONTROL) - 2 SETS
QUANTITY: 2

5)DRYER OF THE TYPE 2000 (BEING EQUIPPED WITH ELECTRONIC WEIGHING)
EXTERIOR DIMENSION: 4500×2100×2900MM
QUANTITY: 1

6)GOOSE FEATHER ADDING MACHINE FOR DRYER(STAINLESS STEEL USED FOR IT AND ELECTRONIC WEIGHING INCLUDED)
EXTERIOR DIMENSION: 1500×1200×3600MM
QUANTITY: 1

7)THE COOLER OF THE TYPE 4700(STEEL & WOOD STRUCTURE, OPTIMIZED MOISTURE PROOF PANEL)
EXTERIOR DIMENSION: 4700×2350×2600×Ф2000MM
QUANTITY: 1

8) SORTING EQUIPMENT
QUANTITY: 2

9) POWER DISTRIBUTION CABINET
QUANTITY: 2

RINSING MACHINE: TYPE 2000

1. EXTERIOR DIMENSION: 4000×2000×2600×Ф1800MM DIAMETER

2.THE MATERIAL OF 14MM IN THICKNESS STAINLESS STEEL IS USED FOR THE WALL FOR WASHING MACHINE AND 5MM IN THICKNESS FOR BARREL

3. THE MATERIAL OF AISI 1045 IS USED FOR THE SPINDLE OF THE SQUARE SHAPE(SPECIFICATION =108MMX108MM). WRAPPED WITH 2MM STAINLESS STEEL IN THE OUTER.
10MM IN THICKNESS STAINLESS STEEL IS FOR HOOP OF VANE.
4MM IN THICKNESS STAINLESS STEEL WHICH IS FOLDED IS FOR VANE.
HOOP SCREW OF M14 X 70 (HIGH STRENGTH GRADE) ARE USED.
THE BEARING HOUSING &BEARING OF UKP318 IS USED FOR THE SPINDLE.

4.THE SIEVE OF 1.5MM IN THICKNESS STAINLESS STEEL IS USED FOR WACHING MACHINE.THE HOLE IS 1.8MM IN DIAMETER. HOLE SPACING 3.8MM .THE STAINLESS STEEL OF 2MM IS USED FOR THE OBLIQUE OF OUTPUTTING THE GOOSE FEATHER.THE OUTLET NEAR DEWATERING MACHINE FOR GOOSE FEATHER CAN BE TURNED UPWARD. FOR GOOSE FEATHER.

5.THE PIPE FOR WATER INLET IS 114MM IN DIAMETER

6.THE POWER OF FAN: 7.5KW AND SPEED: 2900R/M

7.THE PIPE FOR FEEDING GOOSE FEATHER IS 250MM IN DIAMETER.

8.THE REDUCER FOR THE SPINDLE: JZQ-400. THE POWER OF MOTOR IS 15KW AND OUTPUT SPEED IS 42 R/M

9.EXTERIOR DIMENSION OF THE BOTTOM FOR WASHING MACHINE: WIDTH=1600MM;LENGTH=3500MM.ONE SIEVE OF 1MM IN THICKNESS FOR IT.

WATER TANK

1. THE DIMENSION OF TANK: Ф1930MM×2440MM

2.THE STAINLESS STEELOF 2MM IN THICKNESS FOR ITS BARREL AND 3MM FOR THE BOTTOM.THE COVER IS CONSTUCTED WITH ANGLE IRON OF STAINLESS STEEL AND INNER COVER 2MM STAINLESS STEEL PLATE.

DEWATERING MACHINE OF TYPE 1600

1. ONE SETS OF RINSING MACHING OF THE TYPE 2000 IS EQUIPPED WITH TWO SETS DEWATERING MACHINE OF THE TYPE 1600

2.THE POWER OF MOTOR=11KW-17KW.DOUBLE SPEED MOTOR WITH VARIABLE FREQUENCY CONTROL.

DRYER OF TYPE 2000

1. EXTERIOR DIMENSION: 4500×2100×2900×Ф1800MM（DIAMETER）

2. THE MATERIAL OF 14MM IN THICKNESS STAINLESS STEEL(Q345R) IS USED FOR THE WALL FOR WASHING MACHINE. 10MM STAINLESS STEEL(Q345R) IS USED FOR INNER COVER OF THE BARREL AND 10MM STAINLESS STEEL (Q345R) PLATE FOR OUTER COVER OF THE BARREL.

3. THE INNER WALL OF WIND PLATE IS 0.5MM IN THICKNESS AND THE HOLE 1.5MM IN DIAMETER STAINLESS STEEL. 3MM COLD ROLLED PLATE IS USED FOR THE OUTER GATE.

4. THE SEAMLESS PIPE OF Ф108MM×10MM IS FOR THE MAIN SPINDLE.THE STEEL PLATE OF 10MM IN THICKNESS IS FOR THE VANE.THE WIDTH OF THE VANE IS 80MM. HOOP SCREW IS M12X70

6. THERE ARE FOUR INLET OF 1.5INCH IN DIAMETER FOR STEAM.
RELIEF VALVE FROM 3 KILO TO 7 (1 SETS)
THE PRESSURE GAGE (0-16 KILO) (2 SETS)
THE THERMOMETER (0-150 DEGREE) (1 SETS)
THERE ARE THREE DRAIN HOLE OF 1.5 INCH IN DIAMETER AT THE BOTTOM

6. THERE ARE TWO LAYERS FOR GOOSE FEATHER ADDING FOR DRYER: 1.5×1.2×3.6M.THEY ARE MADE WITH STAINLESS STEEL.THE SPECIFICATION OF CHARGING SPOUT ON THE TOP OF DRYER IS 1.55 X 0.55M.

7. THE OUTLET FOR GOOSE FEATHER OF DRYER CAN BE TURNED UPWARD.THE PIPE FOR OUTPUTTING GOOSE FEATHER IS 300MM IN DIAMETER.

8. TWO FANS ARE EQUIPPED FOR PRECISE WASHING LINE.THE POWER OF FAN FOR ADDING GOOSE FEATHER IS 7.5KW,SPEED: 2900R/M.WHICH IS USED TOGETHER WITH GOOSE ADDING MACHINE OF WASHING MACHINE.THE POWER OF FAN FOR DRYER IS 5.5KW,SPEED IS 2900 R/M.

9. MAIN SHAFT SPEED REDUCER FOR BELT BRIDGE MOTOR 7.5KW.OUTPUT SPEED IS 52 R/M
THE COOLER IS OF TYPE 4700

1. EXTERIOR DIMENSION: 4700×2350×2600×Ф2000MM DIAMETER

2. THE EXTERIOR IS CONSTRUCTED WITH THE WHOLE WOOD STRUCTURE.THE MATERIAL OF STEEL WITH 4# ANGLE STEEL AND 30X30 SQUARE TUBE IS FOR THE INNER SKELETON.

3. THE SEAMLESS PIPE OF Ф108MM×10MM IS FOR THE MAIN SPINDLE.THE STEEL PLATE OF 14MM IN THICKNESS IS FOR THE VANE.THE WIDTH OF THE VANE IS 80MM. HOOP SCREW IS M16X70

4. THE DIAMETER OF WIND PIPE: MAIN PIPE IS 300MM IN DIAMETER AND BRANCH IS 250MM IN DIAMETER.THERE ARE FOUR AIR OUTLET OF 300MM IN DIAMETER EQUIPPED EQUALLY SPACE.

5. ONE SIEVE IS EQUIPPED FOR THE COOLER.THE SIEVE IS MADE WITH 0.6MM IN THICKNESS GALVANIZED STEEL SHEET.THE HEIGHT OF HOLE IS 1.1MM.THE SCREEN FRAME IS MADE WITH 3# ANGLE STEEL.

6.THERE ARE TWO SORTING BOX WHICH IS CONSTRUCTED WITH STEEL FRAME AND WOODEN STRUCTURE. SIEVE 14 MESH GALVANIZED MESH BOLD

7. ONE FAN IS FOR THE COOLER.THE POWER OF THE FAN IS 11KW AND OUTPUT SPEED IS 2900 R/M

8. THE MOTOR FOR THE MAIN SPINDLE IS 15KW (6 POLE).THE SPEED OF 140 R/M IS FOR THE COOLER.

QUANTITY: 1

Learn More

T-7655 ULTRASONIC SEWING MACHINE, WORKING SPEED 0 TO 26M/MIN CARTON SET: WOODEN BOX CTN SIZE: 1270, 540, 1200mm QUANTITY/CTN: 1 CBM: 0.82 SINGLE MOTOR OUTPUT POWER: 2500W WPOWER INPUT: 220V OUTPUT FREQUENCY: 20KHz WORKING TEMPERATURE: -10-28C WORKING SPEED: 0 TO 26M/MIN EQUIPPED PATTERN MOULD: 0 TO 200mm WEIGHT OF MACHINE: 95KG QUANTITY: 1 Learn More

REFERENCE NUMBER: J-4363 AUTOMATIC PET PAD MAKING MACHINE, 200 PADS PER MINUTE FOR PRODUCTS 450 TO 1500mm, COTTON CORE BETWEEN 400 TO 1000mm TOUCH SCREEN WITH ADJUSTABLE PRODUCT REQUIREMENTS IN 450 TO 600mm, COTTON CORE IN 400 TO 550mm PRODUCT STRUCTURE: SURFACE LAYER, BACKING PAPER, COTTON CORE, SAP, BASEMENT MEMBRANE STABLE PRODUCTION SPEED: 120 METERS PER MINUTE IF THE SIZE OF THE FINISHED PRODUCT IS 600 x 600mm, THE MACHINE RUNNING SPEED IS 200 PIECES PER MINUTE (8 HOUR OUTPUT IS 96,000 PIECES) MACHINE DIMENSIONS: 16000 x 2200 x 2600mm (LENGTH x WIDTH x HEIGHT) POWER SUPPLY: 380 VOLTS, 50 Hz TOTAL POWER: ABOUT 80 KW (NOT INCLUDING GLUE) PRESSURE: 1100 LITERS PER MINUTE, 6 TO 8 BARS YIELD: 98% OR GREATER (EXCLUDING ERRORS DUE TO GLUE MACHINE, MATERIAL EXCHANGE AND JOINTS CAUSED BY DEFECTIVE GOODS) QUANTITY: 1 Learn More

REFERENCE NUMBER: F-1234 NEEDLE PUNCHED NONWOVEN PRODUCTION LINE 4500mm QUANTITY: ONE PRODUCTION LINE Learn More