Search results for: 'Waste'

V-1449 RIETER E65 COMBERS WITH RIETER E32 LAP FORMER, YEAR 2006

(4) X RIETER E65 COMBING MACHINES
MAKE: RIETER
MODEL: E65
YEAR: 2006
QUANTITY: 4
NO.OF DELIVERIES: SINGLE
NO OF DOUBLING: 8
MATERIAL PROCESSED: COTTON
TROLLEYS AVAILABLE: 8
UNICOMB MAKE: GRAF
TOP COMB MAKE: GRAF
EXHAUST/WASTE SUCTION: UPWARDS
SPOOL DIAMETER: 200 mm SPOOL WIDTH: 300 mm
UNICOMB TYPE: PRIMA COMB 8015
TOP COMB TYPE: 2026
DIAMETER AND HEIGHT OF CAN: 24" X 47"
SPARE SPOOLS: 50 SPOOLS AND 6 TROLLEYS
THEY DO NOT HAVE INDIVIDUAL HEAD MONITORING
THEY HAVE ON LIGHT BARRIER TO MONITOR 8 HEADS
QUANTITY: 4

(1) X RIETER E32 LAP FORMER MACHINE
MAKE: RIETER
MODEL: E32
YEAR: 2006
NUMBER OF TROLLEYS: 16
NUMBER OF DOUBLINGS SLF: 32
QUANTITY: 1

C-1191 RIETER UNILAP E-32, YEAR 2001, WITH FEEDING AND AUTOMATIC CYLINDRICAL EXIT

SPECIFICATIONS:
UNILAP RIETER E-32
FEEDING 14X2 CAN 24”
AUTOMATIC CYLINDRICAL EXIT WIDTH 300 X DIAMETER 450 mm + FAN FOR WASTE
YEAR 2001

QUANTITY: 1

A-2100 MURATA VORTEX SPINNING MVS870, YEAR 2001, 96 SPINDLES, 50 HZ

MODEL: MVS870
YEAR: 2011
VOLTAGE: 380V / 50 Hz
96 SPINDLES
(1) LEFT HAND WITH PACKAGE CONVEYOR
RIGHT TO LEFT, WITH PACKAGE LIFTER
(1) RIGHT HAND WITH PACKAGE CONVEYOR
LEFT TO RIGHT, WITH PACKAGE LIFTER
YARN CLEARER
MSC-F (WITH FOREIGN FIBERS DETECTION
PACKAGE: 6” PARALLEL
WAXING DEVICE
1 SET OF ORIENT NOZZLES – Z TWIST/MACHINE
1 SET OF ORIENT NEEDLE HOLDERS/MACHINE
1 SET OF ORIENT MIDDLE SPINDLES/MACHINE
1 SET OF ORIENT FINE SPINDLES/MACHINE
3 SPLICING CARRIAGES/MACHINE
1 AUTODOFFER/MACHINE
AUTOMATIC WASTE FIBER EXTRACTION
OVERHEAD BLOW CLEANER/MACHINE

QUANTITY: 2

V-1042 RIETER SPINNING PLANT OF ABOUT 20,500 SPINDLES

01 X RIETER A10 UNIFLOC, YEAR 1998, LENGTH 38 METERS
01 X RIETER B2/5 WASTE FEEDER, YEAR 1998
01 X RIETER B11 UNICLEAN, YEAR 1998
01 X RIETER B7/3 UNIMIX, YEAR 1998
01 X RIETER B60 UNIMIX, YEAR 1998
02 X JOSSI FOREIGN FIBER DETECTORS, ED-33-1200-1 YEAR 2002
02 X RIETER A20+A21 CONDENSER, YEAR 2002
01 X RIETER B11 UNICLEAN, YEAR 2002
01 X RIETER B7/3 UNIMIX, YEAR 2002
01 X RIETER B60 UNIMIX, YEAR 2002

06 X RIETER C51 CARDS, YEAR 1998
11 X RIETER C51 CARDS, YEAR 2002
AUTOMATIC COILER
CAN SIZE: 600 MM X 1200 MM

02 X RIETER SB-D10 DRAW FRAMES, YEAR 1998
02 X RIETER RSB-D30 DRAW FRAMES, YEAR 1998
03 X RIETER SB-D15 DRAW FRAMES, YEAR 2002
04 X RIETER RSB-D35 DRAW FRAMES, YEAR 2002

01 X RIETER E32 UNILAP, YEAR 2002
05 X RIETER E62 COMBERS, YEAR 2002
01 X KAIGON UNILAP 2, YEAR 2012
06 X RIETER E7/5 COMBERS, YEAR 1987

04 X RIETER F10 ROVING FRAMES, YEAR 1998, 120 POSITIONS
03 X RIETER F11 ROVING FRAMES, YEAR 2002, 144 POSITIONS

08 X RIETER G33 RING FRAMES, YEAR 1998, 1104 SPINDLES, DIAM. 42 MM, GAUGE 70 MM, TUBES 210 MM, DRAFTINGS P3-1
10 X RIETER G33 RING FRAMES, YEAR 2002, 1200 SPINDLES, DIAM. 40 MM, GAUGE 70 MM, TUBES 200 MM, DRAFTINGS P3-1

04 X SCHLAFHORST AC 238 WINDERS, YEAR 1998, 60 SPINDLES
04 X MURATA 21F MURATEC WINDERS, YEAR 2002, 60 SPINDLES
AUTOMATIC FEEDING
USTER QUANTUM IMK-C20-F20 CLEARERS
5.57 CONICITY
WAXING

M-4562 RIETER SB2 DRAW FRAMES YEAR 1993 TO 2000

RIETER SB2
(2) X YEAR 2000
(4) X YEAR 1993/1996
NUMBER OF DELIVERIES: 2
CAN SIZE: 24 X 48”
CAN CHANGER: AVAILABLE
PNEUMAFIL WASTE: INDIVIDUAL
TYPE OF CREEL: POWER CREEL
LENGTH OF CREEL: LONG

QUANTITY: 6

S-1166 SEMI-AUTO TIPPING MACHINE, MACHINE DIMENSION 800 X 650 X 900mm

SEMI-AUTO TIPPING MACHINE
IT IS WIDELY USED FOR TIPPING CORDS, SHOELACES, ROPES ETC
IT IS EASY TO PRODUCE DIFFERENT SIZES OF SHOELACE BY CHANGING THE GEAR
ADOPTING FREQUENCY CONTROL
OUR MACHINES POSSESS AUTO-STOP SYSTEM
WRAPPING CENTER YARN FEEDING SYNCHRONOUSLY
AND THAT CAN ACHIEVE LOW WASTE AND HIGH PRODUCTIVITY
WITH HIGH QUALITY WORK AND REASONABLE STRUCTURES
IT RUNS STABLY IN LONG LIFETIME
WITH GOOD DESIGNATION
EASY AND SECURITY OPERATION
THE MAINTENANCE OF IT IS EASY AND CONVENIENT
ADOPTING FREQUENCY CONTROL MOTOR IS EASY TO CONTROL THE SPEED
AND PROTECT THE LOAD
HANGING INDUSTRIAL CERAMIC EYELETS AT THE YARN OFF-TRACK POINT TO INSTEAD PERFORATION WORK AND IT IS EASY TO CHANGE THE BOBBIN
AND ADJUST THE SPRING FOR THE USING OF NEW TYPE SPINDLE
SEMIAUTOMATIC TIPPING MACHINE:
VOLTAGE: 220VAC, SINGLE PHASE, 50HZ, 0.75KW
OUTPUT CAPACITY: 40 PIECES/MIN
MACHINE WEIGHT: 160 KGS
MACHINE DIMENSION: 800 X 650 X 900mm

QUANTITY: 1

K-8157 COAL FIRED POWER PLANT (2 X 50MW)

ENERGY BOILERS (CAE)

TURBINE SYSTEMS
STEAM TURBINES (TA) - DSL ARE 50 - 1
-CONDENSING TURBINE WITH TWO ADJUSTABLE OUTLETS, SUCH AS "ACTING" ON A SINGLE LINE OF TREES, DESIGNED TO DRIVE THE AC GENERATOR DIRECT-TYPE TH 60-2
-IS COMPOSED OF TWO BODIES: THE BODY OF HIGH PRESSURE (CIP) AND MEDIUM AND LOW PRESSURE BODY (CMP + CJP)
-HAS TWO ADJUSTABLE OUTLETS (PLUG SOCKETS AND PLUG HEATING) AND FIVE FIXED DOSES REGENERATIVE CIRCUIT FEED

SQUARES OF 600 CARS OVER T/H (WITH BUCKET WHEEL AND ARM LENGTH 12 M) - 4 PCS
-TIP HAMMER CRUSHERS CCA - 160 TO 2 PIECES
- RUBBER BANDS COAL TRANSPORT

THE MAIN EQUIPMENT IS ADDED TO ENSURE PROPER OPERATION FOLLOWING:
- SOLID FUEL STORAGE
- INSTALLATIONS AND INDUSTRIAL WATER SUPPLIES AND WASTEWATER DISCHARGE
- INSTALLATION OF EXHAUST HYDRAULIC SLAG
- WATER TREATMENT STATION
TO USE COAL, WEIGHT 88%, 12% NATURAL GAS

QUANTITY: 1

K-8046 BBC-ABB 300 MW COAL-OIL-GAS BIOMASS FIRED PLANT YEAR 2006

COAL FIRED STEAM TURBINE POWER PLANT
300MW
COAL OIL GAS
BIOMASS FIRED
OUTPUT: 600 MW
180 BAR
540°C
MANUFCATURER/TYPE: BBC-ABB
YEAR: 2006
ONLY 13,300 AND 45,000 RUNNING HOURS AFTER MAJOR OVERHAUL

ALTERNATOR ACEC TC 1498
COOLING: HYDROGEN 22 KV 3000 TR 1550 KVA
MAIN TRAFO: WESTINGHOUSE 375 MVA 156/22 KV
COUPLE TRAFO: ALSTHOM 20 MVA 22/6.4 KV
START TRAFO: ALSTHOM 20 MVA 71.5/6.4 KV

FUELPUMPS: ID:3 / HD:3 LD:2881/HD:2223
16 BURNERS TANGENIAL

GASBURNERS: TANGENIAL 16 PCS 5000 NM3

COAL GRINDING MILLS:
(4) LOESCHE LM 19.20D
25 T/HR

(2) LOESCHE LM 20.20D
35 T/HR

BIOMASS POWER GENERATION BY CFB (CIRCULATING FLUIDIZED BED) BOILER 20 MWe FIRED BY WOOD DERIVED WASTES CUT INTO CHIPS. COMPLETE SAWDUST INSTALLATION.

UNIT 1
172,000 HOURS, OVERHAULED IN 2006
NEW ROTOR (HD, MD, LD)
ONLY 13,000 HOURS AFTER OVERHAUL
IN PRODUCTION UNTIL JANUARY 5, 2013
SWAP HD ROTOR IN APRIL 2011 ONLY 408 HOURS UNTIL NOW!

UNIT 2
265,000 HOURS, OVERHAULED IN 2006 (HD, MD, LD)
45,000 HOURS AFTER OVERHAUL
IN PRODUCTION UNTIL JANUARY 5, 2013
SWAP HD ROTOR IN NOVEMBER 2011 ONLY 13,300 HOURS UNTIL NOW!
189 KG/CM2, 540˚C, 3000 T/MIN

PLANT ORIGINALLY FROM THW 1970’S BUT RENEWED IN 2006
STILL INSTALLED
IMMEDIATE DISMANTLING POSSIBLE
BOILER INTAKE CAPACITY: 3500 T/H
NEW PLC

QUANTITY: 2

REFERENCE NUMBER: F-1429

down FILLING MACHINE MODEL SR-3

PRODUCT FEATURES

•             FULLY ENCLOSED DESIGN TO KEEP SURROUNDINGS CLEAN AND TO SAVE MATERIAL

•             AUTOMATIC WEIGHING WITH ACCURATE LOAD CELL TO ENSURE PRODUCTION QUALITY

•             FILLING TIME IS 2 TO 5 SECONDS

•             NICE DESIGN SUITABLE FOR ALL KINDS OF FABRIC

•             CE CERTIFICATE

•             TYPE : SR-3

•             DIMENSION: 3000 x 2500 x 2000MM

•             VOLTAGE: 200/380/415V 50/60HZ 3PHASE

•             POWER: 3.8 KW

•             FILLING RANGE: 2-100 G, DEPENDING ON THE MATERIAL

•             ACCURACY: ±0.2G

•             AIR PRESSURE: 0.5 TO 0.8MPA

•            THE DEVELOPED COMPUTERIZED DOWN & FEATHER WEIGHING FILLING MACHINE IS MAINLY USED TO FILL JACKETS, SLEEPING BAGS, CUSHIONS, PILLOWS, PADS, COMFORTERS ETC THAT ARE MADE WITH DOWN & FEATHER AND CONTROLLED BY A COMPUTERIZED WEIGHING SYSTEM.

•             THREE HOPPER-SYSTEM FOR CONSTANT SUPPLY

•             THE VACUUM FILLING FUNCTION THAT DOES NOT HURT THE MATERIAL AND KEEPS THE ORIGINAL ELASTICITY AND SOFT-HAND FEELING.

•             ACCURATE WEIGHING RESULTS; THE TOLERANCE IS WITHIN 0.2 GRAM. IT CAN BE ADJUSTED ACCORDING TO THE PRODUCTION REQUIREMENT BY CHOOSING GROUP ERROR OR SINGLE PIECE ERROR FROM THE CONTROL PANEL, SO THAT THE PRODUCTION QUALITY IS ASSURED AND MATERIAL WASTE IS CONTROLLED

•             THE WHOLE LINE CAN BE HANDLED BY ONE OPERATOR WITH VERY SIMPLE

OPERATION

•             ALL THE MATERIALS ARE INSIDE THE HOPPERS WITHOUT PRODUCING ANY DUST THAT AFFECTS THE WORKING AREA

•             KEY ELECTRICAL COMPONENTS ARE IMPORTED

•             THE WHOLE LINE OPERATION IS CONTROLLED BY PLC SYSTEM

•             ACCORDING TO DIFFERENT QUANTITY AND QUALITY PRODUCTION REQUIREMENTS THE MACHINE CONTROL PANEL CAN BE SET UP FOR 100 GROUPS OF RECIPES AND EACH RECIPE CAN BE 50 SETS OF DIFFERENT WEIGHT VALUE FOR FILLING OPTIONS, WHICH IS ENOUGH TO FILL DIFFERENT PARTS OF THE SAME PRODUCTION.

•             THE AVERAGE FILLING TIME CAN BE 4 TO 10 SECONDS (DEPENDING ON THE ACCURACY) AND THE FILLING TIME CAN BE ADJUSTED

•             THE CUSTOMER’S DIFFERENT REQUIREMENTS ARE CONSIDERED BY OUR PROFESSIONAL ENGINEERS SO THAT THE MACHINES ARE SUITABLE FOR YOUR PARTICULAR NEEDS

•             MATERIAL HOPPER: DIA.1200 x 2000MM               1PCS

•             WEIGHING SYSTEM: 1200 x 1000 x 1000MM         1PCS(3SETS)

•             FILLING TABLE :1200 x 550 x 1500                               1PCS

•             PLC CONTROL SYSTEM AND CONTROL PANEL:     1SETS

•             BLOWER:                                                                             3PCS

•             PIPE SYSTEM