Search results for: 'For in'

MODEL: B:SHT1360-1560-C7H-HY MEASURES: 3500x1620x1750mm VOLTAGE PER CUSTOMER REQUEST POWER : 0.75 +4+0.75+4+2.2 KW OUTPUT: 80 TO 150KG/H BLOOMS: 98% OR ABOVE WEIGHT: 800 KG Learn More

REFERENCE NUMBER: A-1204 (1212GHBXX11) A KARL MAYER DOUBLE RASCHEL MACHINE RD 6 / 3-15 EL RD 6 / 3-15 EL RASCHEL MACHINE FOR THE PRODUCTION OF WARP-KNITTED SPACER FABRIC MAX. WORKING WIDTH: 3505 MM (138 INCHES) KAMCOS (KARL MAYER COMMAND SYSTEM) QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5010 (12123GHBLSD11UN) L COMPLETE GLASS FIBER PROCESSING LINE FIBER PREPARATION & WEB FORMING EQUIPMENT CURING OVEN WITH ALL AUXILIARY EQUIPMENT, CROSS CUTTER, STACKER, AND WINDER RECUPERATIVE THERMAL OXIDIZER (RTO) TO TREAT OVEN EXHAUST DUST FILTRATION SYSTEM WITH RECYCLING OF FIBER AND RESIN PHENOLIC POWDER RESIN SUPPLY SYSTEM COMPLETE ELECTRIC CONTROL SYSTEM (SIEMENS S 7) FIBER BLEND CAPABILITIES: GLASS FIBER E GLASS UP TO STAPLE LENGTH OF 3 1/4 INCH 100% GLASS FIBER BLENDS WITH ANY MAN MADE FIBERS SUCH AS PET-PA OR RAYON GLASS FIBER BLENDS WITH ANY OF THE ABOVE PLUS ORGANIC FIBERS SUCH AS CELLULOSE, WOOD, NEWSPAPER, COTTON, AND ALL NATURAL FIBERS BI-CO FIBERS USED AS BINDER FIBER WITH A STAPLE LENGTH OF 2 INCHES AND A DTEX RANGE FROM 3 TO 10 MINIMUM BLEND RATIO IS 8% FOR EACH FIBER COMPONENT BLEND ACCURACY WITH THE USE OF OUR CONTROLS AND WEIGHING SYSTEM AS OFFERED +/- 2% WEB FORMING CAPABILITES: MINIMUM WEIGHT WITH 100% GLASS FIBER IS 35 TO 40 G/FT² MAXIMUM WEIGHT WITH 100% GLASS FIBER IS 300 G/FT² PRODUCT LOFT WITH 100% GLASS FIBER AT LOWEST WEIGHT AND FIBER LENGTH OF 3 INCH IS 45 TO 55 mm PRODUCT LOFT WITH 100% GLASS FIBER AT HIGHEST WEIGHT IS 250 mm PRODUCT WEIGHT ACCURACY IF OUR WEIGHT AND CONTROL SYSTEM IS IN USE WILL BE +/- 3% IN MACHINE & CROSS MACHINE DIRECTION FIBER DISTRIBUTION AND PRODUCT APPEARANCE AT LOWEST WEIGHT +/- 5% (WINDOWS AND CLOUDS) PHENOLIC RESIN CAPABILITIES: POWDER INTRODUCTION RATE INTO THE WEB FORMER IS MIN OF 10% AND A MAX OF 40% TRADITIONALLY THE AMOUNT OF BINDER RESIN IN USE IS BETWEEN 18 TO 22% IN RELATION TO THE FIBER WEIGHT POWDER DISTRIBUTION WITHIN THE PRODUCT AT AN ACCURACY OF +/- 3% PRODUCTION CAPACITIES PER HOUR WITH A MAXIMUM WORKING WIDTH OF 110 INCHES: WITH THE LOWEST PRODUCTION WEIGHT OF 35 TO 40 G/FT² 14 M/MIN AND 1,660 LB/HR WITH A PRODUCT WEIGHT OF 100 G/FT² 16 M/MIN OR 52 FT/MIN AND 4,000 LB/HR HIGHER PRODUCT WEIGHT (E.G.) 200 G/FT² 8 TO 9 M/MIN OR 26 TO 30 FT/MIN AT 4,000 LB/HR THESE PRODUCTION NUMBERS ARE CONSERVATIVE AND BASED ON ACTUAL TRIALS AND EXPERIENCE THE REAL PRODUCTION OUTPUT PER HOUR CAN BE INCREASED WHEN LOWER QUALITY EXPECTATIONS ARE ACCEPTED AND THE OPERATORS HAVE ACQUAINTED THEMSELVES WITH THE FEATURES OF THE EQUIPMENT QUANTITY: 1 Learn More

FIBRE OPENING/ AND MIXING LINE: 2 BALE OPENERS TYPE AC-1500, WORKING WIDTH 1500mm, INCL. FEEDING CONVEYOR. 1 BALE OPENER TYPE AS-204 (FOR MELT FIBRE DOSING), WITH ELECTRONIC WEIGHING TYPE SP-205. 1 TYPE AFM 700, WIDTH 700mm, LENGTH 7500mm. 1 MIXING OPENER TYPE AF 700, WORKING WIDTH 700mm., OPENING ROLLERS WITH NEEDLES. 1 FINE OPENER TYPE SF-1500, WORKING WITH 1500mm, 500KG/H WITH DOSING SHAFT. 1 FILTER STATION FOR TRANSPORT AIR, TYPE CF DOUBLE BAG FILTER. 1 ELECTRONIC CONTROL PANEL WITH TOUCHSCREEN. AIRLAID LINE: 1 DOSING MACHINE BEMABLOW, WORKING WIDTH 2500mm WITH ELECTRONIC CONTROLLED DOSING CAPACITY. 1 AIRLAID WEB BUILDER TYPE FORMER T-MAX WORKING WITH 2700mm WEB HEIGHT 50-350mm, WEB WEIGHT 300 TILL 300GT/M2. 1 ELECTRONIC CONTINUING BAND WEIGHING DEVICE BEMAMULTISCALE, FOR WEB FROM AIRLAID WEB BUILDER, WITH FEEDBACK TO AIRLAID MACHINE. 1 FILTER STATION FOR TRANSPORT AIR TYPE CF, DOUBLE BAG FILTER. 1 ELECTRONIC CONTROL PANEL WITH TOUCHSCREEN. SPRAYING AND DRYING. 1 PRAYING CABIN BOMBI, 2600mm WORKING WIDTH. 1 THERMOBONDING OVEN BOMBI 2012, TYPE TFP/2N/2.7M, 2 DRYING SECTIONS, GAS HEATED, INCL. CALIBRATING ZONE, 2 STATIC FILTERS, 11.0 RESP. 5.5KW, OVEN LENGTH 12000mm. 1 CALANDER BOMBI 2012, TYPE CAL/2C/2.7M. 1 COOLING SECTION BOMBI 2012, TYPE RAF. 1 LENGTH- AND CROSS CUTTER BOMBI 2012, TYPE TG2.7/2+2. 1 ELECTRONIC CONTROL PANEL/ PROGRAMMER WITH TOUCHSCREEN. - ABOVE LINE CAN PROCESS FLAX, HEMP, REGENERATED FIBRES, POLYESTER AND LOW MELT FIBRES. - PRODUCTION 500KG/H. - CONSUMPTION: GAS 45M³/H, ELECTRICITY 90KW/H. Learn More

TT-8645 OPEN WIDTH WASHING MACHINE FOR WOVEN FABRIC, WORKING WIDTH 1800mm, 5 WASHING CHAMBERS, 2 WASHING DRUMS IN EACH CHAMBER 1. OPEN WIDTH WASHING MACHINE FOR WOVEN FABRIC 2. WORKING WIDTH: 1800mm 3. 5 WASHING CHAMBERS 4. 2 WASHING DRUM IN EACH CHAMBER 5. DRIVING SIDE: (PLEASE SPECIFY) Learn More

TT-8496 EPE FOAM BONDING MACHINE, 66KW, WIDTH 2000mm 1. MAIN MOTOR (4KW/380V) 1 SET 2. ONE MAIN INVERTER (4KW/380V) 3. ENERGY-SAVING HIGH-PRESSURE FAN: 4KW 2 SETS 4. HEAT GUNS (16 KW) 4 SETS QUANTITY: 1 Learn More

TT-8352 NAGEMA EL9, 400 TO 450 PIECES PER MIN 1. BRAND: NAGEMA 2. MODEL: EL9 3. CONDITION: REFURBISHED QUANTITY: 1 Learn More

TT-8253 MWM 2032V16, 4.2 MW EACH, NATURAL GAS, YEAR 2009, 50Hz 1. BRAND: MWM 2. MODEL: 2032V16 3. FUEL: NATURAL GAS 4. YEAR OF CONSTRUCTION: 2009 5. OPERATING HOURS: 41,600 (AVERAGE) 6. MAJOR OVERHAUL E60: 2015 (AT AVERAGE 33.600 HOURS) 7. MOTHBALLED: 2019 8. ALTERNATOR: AVK 9. FREQUENCY: 50Hz 10. VOLTAGE: 11 KV QUANTITY: 14 Learn More

TT-8223 VERSA-DRILL V100NG DRILLING RIG, YEAR 2009 1. VERSA-DRILL V100NG DRILLING RIG 2. YEAR 2009 3. BRAND: VERSA-DRILL 4. MODEL: V100NG 5. YEAR: 2009 6. CONDITION: USED QUANTITY: 1 Learn More

TT-8164 WALDRON - ROSS AIR SYSTEMS REVERSE ROLL COATING STATION, WIDTH 60”, YEAR 1995 1. WALDRON - ROSS AIR SYSTEMS REVERSE ROLL COATING STATION 2. BRAND: WALDRON 3. MODEL: REVERSE ROLL COATER 4. YEAR: 1995 5. CONDITION: USED 6. WIDTH: 60.0 INCHES 7. 3-ROLL SYSTEM. QUANTITY: 1 Learn More