Search results for: 'Central'

REFERENCE NUMBER: M-0630 SIMA PROMATECH EXTRUSION LINE EXTRUSION LINE MADE BY SIMA/PROMATECH AND ESSENTIALLY CONSISTING OF: EXTRUDER 130mm DIAMETER AUTOSCREEN GEAR PUMP DIE 1700mm CHILL ROLL DIAMETER: 450 X 1800 AND AIR KNIFE CUTTING UNIT FIRST GODET, 3 ROLLS, DIAMETER 315 X 1650mm, PLUS 1 NIP ROLL STRETCHING OVEN 5000 X 1600 SECOND GODET, 6 ROLLS, DIAMETER 315 X 1650mm, PLUS 2 NIP ROLLS FIBRILLATOR UNIT ANNEALING GODET, 9 ROLLS + NIP ROLL CENTRAL CABINET HOT OIL EQUIPMENT FOR ANNEALING GODET WASTE SUCTION EQUIPMENT AS NEW QUANTITY AVAILABLE: 1 Learn More

TT-8223 VERSA-DRILL V100NG DRILLING RIG, YEAR 2009 1. VERSA-DRILL V100NG DRILLING RIG 2. YEAR 2009 3. BRAND: VERSA-DRILL 4. MODEL: V100NG 5. YEAR: 2009 6. CONDITION: USED QUANTITY: 1 Learn More

TT-7850 JENBACHER JGS 620F NATURAL GAS GENERATOR SYSTEM, 6.712 MW TOTAL, 11KV, 1500 RPM, YEAR 2012 1. JENBACHER GENERATOR SYSTEM 2. CONSISTING OF (2) MODEL JGS 620F JENBACHER NATURAL GAS GENSETS. 3. EACH RATED 3.356 MW; 2.9 MW NET OUTPUT; 1500 RPM; 3/50/11KV. YEAR BUILT 2012. 4. REPORTED 20,000 HOURS ON EACH UNIT. CONTROLLED BY (1) PANEL. 5. BRAND: JENBACHER 6. MODEL: JGS 620F 7. USED EQUIPMENT FACTS ABOUT THIS MACHINE 8. BRAND: JENBACHER (BY INNIO) 9. MODEL: JGS 620F 10. FUEL TYPE: NATURAL GAS 11. YEAR BUILT: 2012 QUANTITY: 1 Learn More

TT-7787 WARTSILA POWER PLANT, 169 MW, 60Hz, YEAR 2010 1. WARTSILA POWER PLANT 2. COMMERCIAL OPERATION START: JANUARY 2010 3. CONTRACT STATUS: OPERATED UNDER STANDBY MODE UNTIL DECEMBER 2024 4. 20 X WARTSILA 20V32 5. 8.45MW EACH, 60Hz 6. HFO, BUT CONVERTIBLE TO DIESEL OR BIODIESEL. GREEN. VERY GOOD CONDITION Learn More

TT-7577 RIUS MACHINE DIANA 608 B-8-15 CROCHET KNITTING MACHINE, YEAR 2022 1. RIUS MACHINE MODEL DIANA 608 B-8-15 2. YEAR: 2022 3. CROCHET KNITTING MACHINE QUANTITY: 1 Learn More

TT-3529 RIETER COTTON COMBED SPINNING PLANT WITH 26,112 SPINDLES, YEAR 2008 TO 2016 Learn More

TT-3204 SINGLE SHAFT AUTO CUTTING MACHINE, WORKING WIDTH 1500mm (BALONEY SLITTER, SUITABLE FOR FILMS) SLITTER REWINDER MAX SLITTING WIDTH: 1600mm (CAN BE CUSTOMIZED FROM 800mm TO 3000mm) MINI SLITTING WIDTH: 10mm UNWINDING DIAMETER: 600mm REWINDING DIAMETER: 300mm AUTOMATIC CUTTING MACHINE FOR FILM ROLLS: AFTER YOU SET THE PARAMETER IT WOULD CUT THE FILM ROLLS TO SMALL WIDTH ROLLS AUTOMATICALY WORKING WIDTH: 1500mm LARGE ROLL MATERIAL DIAMETER MAX: 350mm NO PROBLEM FOR THIS MACHINE TO SLIT YOUR PVC FILM MATERIAL Learn More

YY-2630 SPUHL TRANSFER MACHINE, MODEL FTA-120, 40000 SPRINGS PER SHIFT Learn More

YY-2251 AIRLAID PRODUCTION LINE, FINAL PRODUCT WIDTH 2200mm ITEM 001 BALE OPENER (2 SETS) AND SEALED BALE OPENER (1 SET) ITEM 002 FIBER OPENING MACHINE (FOR LOW MELT FIBER OR PP) - 1 SET ITEM 003 PRE-OPENER – 1 SET ITEM 004 BIG CHAMBER BLENDER – 1 SET ITEM 005 MAIN-OPENER – 1 SET ITEM 006 VIBRATING FEEDER – 1 SET ITEM 007 CONDENSER – 2 SETS ITEM 008 AUTO-LEVER - 1 SET ITEM 009 AIR LAID MACHINE – 1 SET ITEM 010 AUTO-LEVER – 1 SET ITEM 011 BATT FEEDER – 1 SET ITEM 012 HIGH SPEED SINGLE SHAFT SINGLE BOARD PRE NEEDLE LOOM – 1 SET ITEM 013 HIGH SPEED SINGLE SHAFT SINGLE BOARD MAIN NEEDLE LOOM – 1 SET ITEM 014 DOUBLE BELT THERMAL-BONDED OVEN – 1 SET ITEM 015 DOUBLE-ROLLER CALENDER MACHINE – 1 SET ITEM 016 COOLING UNIT – 1 SET Learn More

TT-1726 POLYPROPYLENE TAPE LINE EXTRUDER 15 TONS DAILY CAPACITY, 264 WINDERS, YEAR 2012 POLYPROPYLENE TAPE LINE EXTRUDER 15 TONS DAILY CAPACITY CONDITION: USED MODEL: POLYPROPYLENE TAPE LINE EXTRUDER CAPACITY: 15 TONS DAILY CAPACITY YEAR: 2012 QUANTITY: 1 Learn More