Search results for: 'TOTAL LIFE nz'

P-5079 COMMERCIAL JOPER CAST IRON CRM-30 ROASTER 30 KILOS

WHAT WE HAVE HERE IS A VERY RUGGED CAST IRON ROASTING FRAME AND ROASTING CONTACT CLEARANCES WITH THE MACHINE - JUST PLAIN SOLID AND DOES NOT MOVE UNDER LONG OR EXTENDED USE. DOUBLE WALL DRUM MEANS THAT THE HEAT IS ALL DESIGNED TO GO THROUGH THE CENTER OF THE ROASTING CHAMBER, NOT "ONTO" THE DRUM EXTERIOR. TOTAL TRUE CONVECTION. NOT ONLY IS THIS THE SAME STYLE FROM THE OLD GOTHOT & BARTH ROASTER DAYS. . . BUT EVEN BETTER AS THE SHAFT DESIGN SO THAT BEARINGS ARE EXTERNALLY MOUNTED AND ADDITIONALLY ARE AIR COOLED FOR LONG LIFE AND TROUBLE-FREE CONTROL. EVEN THE SIDE PANELS OR PRODUCT FLIGHTS HAVE A LONGER CURVE POSITIONING MORE PRODUCT FLOW INTO THE HOT AIR STREAM, RESULTING IN A SLIGHTLY MORE RAPID ROAST WITH MORE EVEN BEAN INTERIOR AND EXPANSION THAT FRANKLY LEADS THE INDUSTRY.

ALL THIS COMMENTARY ABOVE MEANS THIS ROASTER SIMPLY IS MORE QUIET THAN ANYTHING ON THE MARKET. PERIOD. THERMAL INSULATION WITH HIGHEST QUALITY OF FIBER FOR LOW GAS CONSUMPTION; DIGITAL TEMPERATURE CONTROL. CYCLONE IS SEPARATE. THE COOLER, BEING TOTALLY SEPARATE ALSO HAS THE LARGEST AIR COLLECTION AREA OF ANY ROASTER MADE ALLOWING FOR TOTAL AMBIENT COOL COFFEE IN LESS THAN THREE MINUTES. ADD TO THIS PACKAGE A LOADER OR YOUR CHOICE OF DESTONERS AND EVEN YOUR CHOICE OF CONTROL METHODS.

DATA INFORMATION:
BATCH CAPACITY: 30 KG / 66 LBS
CONTROL DESIGN: MANUAL
CAPACITY PER HOUR: 120 KG / 265 LBS
ROASTING TIME: 12-18 MIN (4 BATCHES AN HOUR)
EXHAUST AIR TREATMENT: OPTIONAL
COOLING CYCLONE: OPTIONAL
PRE-COOLING WITH WATER IN DRUM: OPTIONAL
COOLING TIME: 3-4 MIN
TYPE OF COOLING: AIR AMBIENT
SAFETY DEVICE: YES
BURNER POWER: 110 KW / 375000 BTU
BURNERS MANUFACTURER: RIELLO
OPERATION TYPE BURNER: BS2D-2 STAGE
FUEL TYPE: PROPANE/NAUTRAL GAS/DIESEL
SIDE OF OPERATION: LEFT
POWER REQUIREMENTS: 20 AMP
VOLTAGE/FREQUENCY/PHASES: 400+N-230 V / 50-60 HZ / 3 PH
9 AMP. . . 3 PHASE 50/60 HZ PREFERRED, YOUR CHOICE OF 220/440 - SINGLE PHASE AVAILABLE AT SPECIAL REQUEST
(NOTE ON 3 PHASE. . . NOT ONLY IS IT LESS EXPENSIVE TO OPERATE, BUT IT RUNS MORE QUIETLY THAN SINGLE PHASE WHENEVER OR WHEREVER IT IS USED. KEEP THIS IN MIND FOR ANY MACHINERY.)
Ø EXHAUST CHIMNEY (ROASTER CYCLONE): 250MM / 9,8 INCH
Ø EXHAUST CHIMNEY (COOLER): 250MM / 9,8 INCH
Ø HOPPER ROAST CHIMNEY: 150MM / 5,9 INCH
ROASTER WEIGHT WITH CYCLONE: 1050 KG / 2310 LBS
COOLER WEIGHT: 300 KG / 660 LBS
ROASTER FAN MOTOR: 1, 5 HP
COOLER FAN: 4 HP
DRUM GEARBOX: 1 HP
COOLER GEARBOX: 0, 75 HP
BUILT TO UL295 STANDARDS.

QUANTITY: 1

Learn More

TT-7926 PEDERSEN 601M-16 HYDRAULIC PRESS, 1000 X 1600mm, 100 TON 1. HYDRAULIC PRESSES 2. BRAND: PEDERSEN 3. MODEL: 601M-16S 4. CONDITION: REBUILT 5. REFURBISHED QUANTITY: 1 Learn More

TT-4198 SUGAR AND ALCOHOL MILL, CAPACITY OF 1,500,000 TONS PER HARVEST SUGAR AND ALCOHOL MILL QUANTITY: 1 Learn More

TT-3984 BALONEY SLITTER FABRIC AUTOMATIC CUTTING MACHINE – NEW, WIDTH 2500mm, 400mm DIAMETER (94.4 INCHES WIDE X 15.7 INCHES DIAMETER) NEW 2500mm FABRIC AUTOMATIC CUTTING MACHINE FOR WOVEN FABRICS, TENTS, UMBRELLAS, LEATHER, REFLECTIVE MATERIAL, PLASTIC, PAPER, DOUBLE SIDED TAPE, ACETATE CLOTH, REINFORCED BELT, CONDUCTIVE CLOTH, AND STRAIGHT, OR 45° OBLIQUE CUT FOR CLOTH FOR APPAREL, BAGS, SHOES, CLOTHING ACCESSORIES, REFLECTIVE MATERIAL FACTORY, TENT FACTORY, UMBRELLA FACTORY, ELECTRONICS FACTORY AND OTHER INDUSTRIES. Learn More

TT-3086 EXTRUSION LINE/PP SPINNING MAKING MACHINE – FOR ROPE MAKING, TWINE, NETS, ETC. EXTRUSION LINE/PP SPINNING MAKING MACHINE CONDITION: NEW RAW MATERIAL: PP PE NEW OR RECYCLED MATERIALS CATEGORY: MONOFILAMENT EXTRUSION LINES SUBCATEGORY: PP/PE/PET/NYLON/ABS MONOFILAMENT MACHINE QUANTITY: 1 Learn More

TT-1994 ISC ITALY CANNON A-SYSTEM 100 HIGH PRESSURE DOSING SYSTEM, YEAR 2020 MACHINE TYPE: HIGH PRESSURE DOSING SYSTEM MANUFACTURER: ISC ITALY MODEL: CANNON A-SYSTEM 100 YEAR OF CONSTRUCTION: 2020 CONDITION: GOOD CONDITION (USED) THE METERING MACHINE IS SUITABLE FOR PROCESSING POLYOL AND ISOCYANATE. IN ADDITION, THE A-COMPONENT CAN BE MIXED WITH FILLERS SUCH AS EXPANDED GRAPHITES. DUE TO THE PLUNGER AND THE SPECIAL NOZZLE GEOMETRY, THE MACHINE HAS AN INCREASED SERVICE LIFE. AN AUTOMATIC REFILL FROM THE 200K BARREL SUCKS IN THE RAW MATERIAL. THE VESSEL IS EQUIPPED WITH COMPRESSED AIR CONTROL, ON THE A-COMPONENT EVEN WITH AGITATOR. SHELL AND TUBE HEAT EXCHANGERS WITH CENTRAL COOLING WATER CONNECTION KEEP THE TEMPERATURE CONSTANT. THE PLANT IS AS GOOD AS NEW AND READY FOR IMMEDIATE USE. MACHINE HAS BEEN PROFESSIONALLY FLUSHED WITH MESAMOLL AND TAKEN OUT OF SERVICE. MACHINE CAN BE INSPECTED BY PRIOR APPOINTMENT. THE SALE IS WITHOUT WARRANTY. Learn More

TT-1726 POLYPROPYLENE TAPE LINE EXTRUDER 15 TONS DAILY CAPACITY, 264 WINDERS, YEAR 2012 POLYPROPYLENE TAPE LINE EXTRUDER 15 TONS DAILY CAPACITY CONDITION: USED MODEL: POLYPROPYLENE TAPE LINE EXTRUDER CAPACITY: 15 TONS DAILY CAPACITY YEAR: 2012 QUANTITY: 1 Learn More

J-4630 DOUBLE SHAFT SHREDDER, CHAMBER DIMENSIONS 1500mm LENGTH x 950mm WIDTH DOUBLE SHAFT SHREDDER KNIVES: 22 PIECES, SIZE Ø500mm x 70mm, MATERIAL 55SRCI SPACERS: 22 PIECES, SIZE Ø290mm x 70mm, MATERIAL 45C STEEL SHAFTS: 2 PIECES, SIZE Ø240mm x 2400mm, MATERIAL 42CRMO CHAMBER DIMENSIONS: 1500mm LENGTH x 950mm WIDTH SPEED: 10 RPM (SPEED IS FIXED AND CAN NOT BE ADJUSTED) DIAMETER OF BARE ROLL (WITHOUT TEETH): 420mm FROM INNER TO THE TEETH BOTTOM DIAMETER, TEETH DEPTH IS 40mm (TOTAL OUTER DIAMETER OF BLADE IS 500mm) SHAFT DIAMETER: 240mm MOTOR POWER: 37 KW (2 PIECES) REDUCER: K SERIES (2 PIECES) VOLTAGE: 480 VOLTS WEIGHT: 12,000 KGS QUANTITY: 1 Learn More

M-7403 NATURAL COCOA CAKE

NATURAL COCOA CAKE
POWDER COLOR: BROWN
SOLUTION COLOR: BROWN
PH VALUE: 5.0~7.8
MOISTURE: MAXIMUM 5%
FAT CONTENT: 10% TO 12%
ASH: MAXIMUM 10%
FINENESS: MINIMUM 99%
COCOA BEAN IS IMPORTED FROM GHANA

MICROBE INDEX:
TOTAL PLATE COUNT: 5,000 CFU PER GRAM
COLIFORMS: MAXIMUM 30MPN PER 100 GRAMS
YEAST COUNT: < 50 CFU PER GRAM
MOULD COUNT: < 50 CFU PER GRAM
PATHOGENIC BACTERIA: NEGATIVE
6.0 NATURAL PH VALUE – NO OTHER TYPE

 

Learn More

REFERENCE NUMBER: M-6245
KRENZLER LACE BRAIDING MACHINES YEAR 1992

LACE BRAIDING MACHINES
MAKE: KRENZLER
YEAR: ~1992
1 x 56 SPINDLES
5 x 52 SPINDLES
11 x 48 SPINDLES
1 x 44 SPINDLES
ALL THESE MACHINES ARE KRENZLER PITCH 55mm

QUANTITY: 18

Learn More