Search results for: 'Drive shaft''

T-9197 AUTOMATIC CUTTING MACHINE, CUTTING WIDTH 1mm TO 1580mm, SINGLE SHAFT AUTOMATIC CUTTING MACHINE SINGLE BLADE FOR SINGLE SHAFT SUITABLE FOR VARIOUS ROLL-STOCK MATERIALS SUCH AS PVC, MASKING, BOPP, FOAM TAPE, PROTECTION FILM, ETC. ROLLER WIDTH 1700mm CUTTING WIDTH 1mm TO 1580mm PAPER CORE I.D. 3'' BLADE DIAMETER MAXIMUM 450mm PRECISION +/-0.1mm POWER SOURCE 220 VOLTS 60 Hz 3 PHASE AIR SOURCE 5 KG (FURNISHED BY USER) QUANTITY: 1 Learn More

C-3994 BARGEMOUNTED POWER PLANT, CAPACITY 220MW

A. ONCE THROUGH STEAM GENERATOR
B. BARGE
C. CHILLERS
D. AIR COMPRESSOR
E. GAS TURBINE
F. STEAM TURBINE
G. FEEDWATER SYSTEM
H. CLOSED COOLING WATER SYSTEM
I. AUXILIARY COOLING WATER SYSTEM
J. CONDENSATE POLISHING UNIT (CPU)
K. WASTE WATER SYSTEM
L. PLANT ELECTRICAL SYSTEM
M. BLACK START DG SET
N. PLANT CONTROLS AND INSTRUMENTATION
O. PLANT FIRE FIGHTING SYSTEM
P. START UP VACUUM SYSTEM
Q. STEAM TURBINE DEAERATING CONDENSER

QUANTITY: 1 PLANT

Learn More

WEAVING MACHINES BENNINGER BEN DIRECT WARPER YEAR 2006 BEAM DIAMETER 1000mm, WIDTH 2200mm V-CREEL – 1024 ENDS, AUTOMATIC CUTTING AT CREEL CHANGE ELECTRICAL STOP MOTION, MECHANICAL TENSIONER MICROPROCESSOR CONTROL SUCKER MOENUS SIZING MACHINE YEAR 2006 SIZING MACHINE SUCKER MOENUS Z 14, WIDTH 3400mm 1000mm FLANG DIAMETER, 14 DRYING CYLINDERS 2 SOW BOXES, 2 DIP AND 2 NIP, 24 WARP BEAMS CREEL, FULLY AUTOMATIC PLC CONTROL SIZE MIXING COOLER, 1200 LITERS SIZE STORAGE VESSEL, 1200 LITERS STAUBLI DELTA AUTO DRAWING IN MACHINE YEAR 2006 AUTO DRAWING IN MACHINE, STAUBLI DELTA 110 3400mm, YARN MODULE (HM5), HEALD MODULE (HM2) REED MODULE (HM6), DROP WIRE MODULE (HM3) AND CONTROL MODULE JAYTEX WARP TYING MACHINE YEAR 2005 WARP TYEING MACHINE JAYTEX TROLLEY WITH TRANSFORMER WITH 2 NOS. TYING FRAMES SETIA KIJJI REED CLEANING MACHINE YEAR 2006 SETIA KIJJI – ULTRA SONIC CLEANING MACHINE REED CLEANER CONSISTS OF RINSING UNIT ULTRASONIC UNIT DRYING UNIT, SEMI AUTOMATIC PROCESS USING PLC. (18 UNITS) TSUDAKOMA AIRJET LOOM ZAX 9100 YEAR 2006 3E+06 EACH – 16 SHAFTS AIRJET LOOM TSUDAKOMA ZAX 9100, 3400mm, STAUBLI ELECTRONIC DOBBY 16 SHAFTS, 2/4 WEFT INSERTION, CRANK BEAT UP, LENO SELVEDGE ELECTRONIC LET OFF, ELECTRONIC TAKE UP, 1.5 BEAMS, 1.5 CLOTH ROLLS (48 UNITS) TSUDAKOMA AIRJET LOOM ZAX 9100 YEAR 2006 3E+06 – 10 SHAFTS AIRJET LOOM TSUDAKOMA ZAX 9100, 3400mm, STAUBLI CAM MOTION 10 SHAFTS, 2/4 WEFT INSERTION, CRANK BEAT UP, LENO SELVEDGE ELECTRONIC LET OFF, ELECTRONIC TAKE UP, 1.5 BEAMS, 1.5 CLOTH ROLLS (24 UNITS) TSUDAKOMA AIRJET LOOM ZAX 9100 YEAR 2006 2E+06 – 6 SHAFTS AIRJET LOOM TSUDAKOMA ZAX 9100, 3400mm, STAUBLI CAM MOTION 6 SHAFTS, 2/4 WEFT INSERTION, CRANK BEAT UP, LENO SELVEDGE ELECTRONIC LET OFF, ELECTRONIC TAKE UP, 1.5 BEAMS, 1.5 CLOTH ROLLS (2 UNITS) GREY INSPECTION MACHINE YEAR 2006 INSPECTION TABLE IS LAMINATED, PUSH BUTTON CONTROLS ARE GIVEN ON THE DRIVE BOX ON THE RIGHT HAND SIDE, CLOTH CAN RUN IN FORWARD AS WELL AS IN REVERSE DIRECTION FABRIC RUNS FACE IN/FACE OUT SPECIAL JOGGING OR INCHING DEVICE FABRIC FOLDING MACHINE YEAR 2006 SWINGING MOTION IS MINIMIZED TO ENSURE HIGH MACHINE CAPACITY AND INCREASE OUTPUT FOLDING BLADES ARE MOUNTED ON A CARRIAGE WHICH HAS A TO AND FRO MOVEMENT ACHIEVED BY SPECIAL STEEL ROLLER CHAIRS BALE PRESS YEAR 2001 BATH BEI HYDRAULIC BALE PRESS MACHINE FABRIC PROCESSING SINGEING MACHINE YAMUNA SINGEING MACHINE WIDER WIDTH – YEAR 2006 (2 UNITS) HYDRAULIC JIGGER KUSTER CALICO YEAR 2006 3E+06 VERTICAL DRYING RANGE YEAR 2006 CONTINUOUS DYEING RANGE – KUSTER CALICO KUSTER CALICO COLD PAD BATCH YEAR 2006 HARISH STENTER – SUPRA 5 DLXI ALMAC FINISH INSPECTION MACHINE YEAR 2006 SHRI NARAYAN COTEX FINISH PLAITING MACHINE YEAR 2006 Learn More

REFERENCE NUMBER: J-1825
HIGH SPEED COMPUTERIZED CHAIN STITCH MULTI-NEEDLE QUILTING MACHINE, NEW - 1200 RPM

QUILTING WIDTH: 2450mm (96 INCHES)
CAPACITY: 60 TO 300 METERS PER HOUR
STITCH LENGTH: 3 TO 7mm
QUILTING THICKNESS: ≤80mm
NEEDLE BAR DISTANCE: 1 x 3 x 6
NEEDLE DISTANCE SIDEWAYS: 25.4mm (ONE INCH)
X-AXIS MOVEMENT DISPLACEMENT: 304.8mm (12 INCHES)
NEEDLE TYPE: 24/180 23/160 22/140 21/130
MAIN SHAFT SPEED: 500 TO 1200 RPM
VOLTAGE: 380V/50Hz, 220V/60Hz, 3-PHASE
POWER: 7 KW
DIMENSIONS: 5400 x 1650 x 2050mm
WEIGHT: 4800 KG

CONTROLS BASED ON WINDOWS, CAD DRAWING
CONTINUOUS PATTERNS AND TACK & JUMP PATTERNS (360° AND 180°) ARE AVAILABLE
DELTA VFD (VARIABLE FREQUENCY DRIVER) DRIVES MAIN SHAFT (Z SHAFT)
PANASONIC SERVO DRIVER & MOTOR CONTROL THE SADDLE (X SHAFT) AND ROLLER (Y SHAFT)
AUTOMATIC STOP WHEN UP OR BOTTOM THREAD IS BROKEN
BOTH UP AND DOWN SAFETY INFRARED PROTECTION

QUANTITY: 1

Learn More

REFERENCE NUMBER: P-3307

VAMATEX DYNA TERRY RAPIER and PICANOL AIRJET TERRY LOOMS

 

3 PICANOL

TYPE: TERRY PLUS

AIRJET TERRY LOOMS

YEAR: 2005 to 2006

CONDITION: ALMOST NEW

 

3 VAMATEX

TYPE: DYNA TERRY

RAPIER WEAVING MACHINES FOR TERRY FABRICS

YEAR: 2007

REED WIDTH: 2600mm

DOBBY FIMTESILE 7P, 20 SHHAFTS

8 COLORS

4 BEAMS 800+1000mm

2650 DROPPERS

6 PRE FEEDERS

2 CLOTH ROLLERS

16 HEALD FRAMES

 

3 PICANOL

TYPE: TERRY PLUS

AIRJET TERRY LOOMS

2 DOBBY and 1 JACQUARD

 

PICANOL

TYPE: TERRY PLUS 800-6-R

AIRJET LOOMS

YEAR: 2005

REED SPACE: 2600mm

6 COLORS

6 PICANOL 1131 CAN PLUS WEFT ACCUMULATORS

STAUBLI DOBBY TYPE 2861-16K FOR 16 SHAFTS

14 SHAFTS PROVIDED – DRC30 DRIVE HARNESS CONNECTION

ELSY ELECTRONIC SELVEDGE SYSTEM

PFT (PROGRAMMABLE FILLING TENSIONER) and PSO (PRE-WINDER SWITCH OFF)

GROUND WRAP BEAM 805mm DIAMETER

PILE WARP BEAM 1000mm DIAMETER

1 GROUND WARP BEAMS, TYPE 190

1 PILE WARP BEAM

2 ADAPTERS

1 CLOTH ROLLER

APPROXIMATELY 5000 DROPPERS, 5000 HEALD WIRES

380 VOLTS, 50 HERTZ

 

PICANOL

TYPE: TERRY PLUS 800-6-R

AIRJET TERRY LOOM

YEAR: 2006

REED SPACE: 2300mm

6 COLORS

6 WEFT ACCUMULATORS

STAUBLI DOBBY TYPE 2861-A6K FOR 16 SHAFTS

14 SHAFTS PROVIDED – DRC DRIVE HARNESS ONNECTION

ELSY ELECTRONIC SELVEDGE SYSTEM

PFT (PROGRAMMABLE FILLING TENSIONER) and PSO (PRE-WINDER SWITCH OFF)

GROUND WARP BEAM 805mm DIAMETER

PILE WARP BEAM 1000mm DIMAETER

1 GROUND WARP BEAM 805mm, TYPE 190

1 PILE WARP BEAM

2 ADAPTERS

1 CLOTH ROLLER

380 VOLTS, 50 HERTZ

 

PICANOL

TYPE: TERRY PLUS 800-8-J

AIRJET LOOMS

YEAR: 2006

REED SPACE: 2600mm

6 COLORS, 6 WEFT ACCUMULATORS

STAUBLI ELECTRONIC JACQUARD TYPE LX1602 FOR 3072 HOOKS AND HARNESS WITH SPRINGS AND 5756 ENDS

LIETTI STEEL JACQUARD GANTRY

ELSY ELECTRONIC SELVEDGE SYSTEM

PFT (PROGRAMMABLE FILLING TENSIONER) and PSO (PRE-WINDER SWITCH OFF)

GROUND WARP BEAM 805mm DIAMETER

PILE WARP BEAM 1000mm DIAMETER

1 GROUND WARP BEAM 805mm DIAMETER

1 PILE WARP BEAM 1000mm DIAMETER

2 ADAPTERS FOR WORKING FROM BEAMS, TYPE 190

1 CLOTH ROLLER

APPROXIMATELY 5000 DROPPERS

 

3 VAMATEX

TYPE: DYNA-TERRY

RAPIER WEAVING MACHINES FOR TERRY FABRICS

YEAR: 2007

REED WIDTH: 2600mm

DOBBY FIMTESILE 7P-20 SHAFTS

8 COLORS

4 BEAMS 800+1000mm

6250 DROPPERS

6 PRE FEEDERS and 2 CLOTH ROLLERS

16 HEALD FRAMES

 

QUANTITY: 15

Learn More

TT-6006 DUSENBERY MODEL 835-30 DUPLEX CANTILEVERED SLITTER REWINDER, 63” 30” REWIND DIAMETER UNWIND DIAMETER: 40” MODEL: 835-30 CONDITION: USED QUANTITY: 1 Learn More

TT-2995 BALONEY SLITTER, CUTTING WIDTH 3 TO 1600mm (64 INCHES) – ONE (SINGLE) SHAFT ACCURACY ± 0.1mm BALONEY SLITTER APPLICATION: USE FOR MELT-BLOWN FABRIC, NON-WOVEN FABRIC, FOAM TAPE, MASKING TAPE, ETC. ROLLER WIDTH: 1700mm CUTTING WIDTH: 3mm TO 1600mm (UP TO 64 INCHES) PAPER CORE I.D.: 76.2mm OR CHANGEABLE CUTTING DIAMETER: MAXIMUM 550mm (21.6 INCHES) POWER SOURCE: PLEASE ADVISE VOLTAGE REQUIRED AIR SOURCE: 5 KG (SUPPLIED BY USER) QUANTITY: 1 Learn More

T-9178 AUTOMATIC CUTTING MACHINE, 4 SHAFTS, 2 BLADES AUTOMATIC CUTTING MACHINERY FOR TAPE LOGS 4 SHAFTS 2 BLADES FOUR SHAFTS ROTATE AROUND TO MEET THE TWO BLADES APPLICATION: SUITABLE FOR VARIOUS TAPE SUCH AS PVC, MASKING, BANDAGES, DOUBLE SIDE, OPP PACKAGING AND FOAM TAPES, ETC SPECIFICATIONS: ROLLER WIDTH: 1800mm CUTTING WIDTH: 2mm TO 1700mm PAPER CORE I.D.: 1 INCH (CHANGEABLE) CUTTING DIAMETER: MAXIMUM 160mm POWER SOURCE: 220 VOLTS, 60 Hz AIR SOURCE: 5 KG (FURNISHED BY USER) QUANTITY: 1 Learn More

TT-2882 SAND WASHING TROMMEL WASH PLANT ON PORTABLE TRAILER, 6’ X 27.5’ 6′ X 27′ TROMMEL WASH PLANT ON PORTABLE TANDEM-AXLE TRAILER AND POWERED BY 40 HP MOTOR AND JACK SHAFT DRIVE. EQUIP YOURSELF WITH THE GOLD STANDARD. QUANTITY: 1 Learn More

TT-4315 CHROMOJET PRINTING MACHINE, WIDTH 4200mm, YEAR 2018 CHROMOJET PRINTING MACHINE YEAR 2018 CHR800 16X512 AND SAMPLING EQUIPMENT FULL LINE, ENTRY, STEAMER, WASHER, DRYER, ROLL UP FULL AUTOMATIC DYE KITCHEN CARPET WIDTH: 2000 TO 4200mm CARPET PILE WEIGHT: 300 TO 2500 G/M² CARPET HEIGHT: 3mm TO 20mm VOLTAGE 380 VOLTS / 3 PHASES / 50 CYCLES; +/- 5% QUANTITY: 1 Learn More