Search results for: 'Waste'

REFERENCE NUMBER: G-8444 PUNCHING MACHINE MODEL FST 11 MACHINE AVAILABLE FOR AUTOMATIC DRILLING IN SHEETS OF PU FOAM, MEMORY FOAM, LATEX, EVA, NEOPRENE. WITH 20mm THICKNESS UP 2 DRILLINGS PER SECOND ARE PERFORMED; E.G.: ONE MOULD FOR 2mm DIAM. HOLES AND 50mm WHEEL BASE OF PUNCH, 7mm X 3.5 CROSSED HOLE PITCH: THE MACHINE WILL PERFORM NO 2310 HOLES EACH DRILLING CYCLE WITH 4620 HOLES PER SECOND IN TOTAL. THAT MEANS THE MACHINE CAN DRILL A FOAM SHEET DIM. 1000X1100mm EACH 20 SECONDS WITH 92400 HOLES IN TOTAL. TWO DRILLING TYPES ARE POSSIBLE: CONTINUOUS DRILLING “A-PERFORM” (NO DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS –SEE TAB. 31A); CONTINUOUS DRILLING “B-PERFORM” (WITH FIXED DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS). THE DISTANCE CAN BE MODIFIED BY OPERATOR). UP TO 150 20mm-THICKNESS MATTRESSES CAN BE PRODUCED IN ONE HOUR; BY INCREASING THE THICKNESS THE PRODUCTION WILL REDUCE. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-8444-A PUNCHING MACHINE MODEL FST 11 FOR LATEX MACHINE AVAILABLE FOR AUTOMATIC DRILLING IN SHEETS OF PU FOAM, MEMORY FOAM, LATEX, EVA, NEOPRENE. WITH 20mm THICKNESS UP 2 DRILLINGS PER SECOND ARE PERFORMED; E.G.: ONE MOULD FOR 2mm DIAM. HOLES AND 50mm WHEEL BASE OF PUNCH, 7mm X 3.5 CROSSED HOLE PITCH: THE MACHINE WILL PERFORM NO 2310 HOLES EACH DRILLING CYCLE WITH 4620 HOLES PER SECOND IN TOTAL. THAT MEANS THE MACHINE CAN DRILL A FOAM SHEET DIM. 1000X1100mm EACH 20 SECONDS WITH 92400 HOLES IN TOTAL. TWO DRILLING TYPES ARE POSSIBLE: CONTINUOUS DRILLING “A-PERFORM” (NO DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS –SEE TAB. 31A); CONTINUOUS DRILLING “B-PERFORM” (WITH FIXED DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS). THE DISTANCE CAN BE MODIFIED BY OPERATOR). UP TO 150 20mm-THICKNESS MATTRESSES CAN BE PRODUCED IN ONE HOUR; BY INCREASING THE THICKNESS THE PRODUCTION WILL REDUCE. QUANTITY AVAILABLE: 1 Learn More

TT-7932 BERGEN B32-46, 5765KW, 60Hz 10000 HOURS, YEAR 2008 1. BERGEN B32-46 2. 5765KW 3. 60Hz 4. 10000 HOURS QUANTITY: 2 Learn More

J-3004 FIBRILLATED RAFFIA TAPE EXTRUSION LINE – NEW, 120mm PP FIBRILLATED YARN EXTRUDER LINE MODEL: NOVASTAR-120 EXTRUSION LINE FOR PRODUCTION OF PP FIBRILLATED YARN RAW MATERIAL: PP GRANULE FINISHED PRODUCTS: NON-TWISTED TAPE YARN, FIBRILLATED YARN FOR TWINE RANGE OF PRODUCT: 10,000 TO 30,000 DENIER 10000 DENIER APPROXIMATELY 17 TO 19 YARN 16000 DENIER APPROXIMATELY 11 TO 12 YARN 22000 DENIER APPROXIMATELY 8 TO 9 YARN 28000 DENIER APPROXIMATELY 6 TO 7 YARN 32000 DENIER APPROXIMATELY 5 TO 6 YARN EXTRUSION THROUGHPUT: 300 KG PER HOUR EXTRUSION CAPACITY: 180 TO 250 KG PER HOUR (PRODUCT CAPACITY DEPEND ON FILAMENT SIZE) EXTRUDER SCREW DIAMETER: Ø 120mm T-DIE WIDTH: 1300mm TAKE-OFF ROLLER WIDTH: 1200mm TAKE-OFF LINE SPEED: 160 METERS PER MINUTE (MAXIMUM) OPERATION SIDE: RIGHT TO LEFT, OR LEFT TO RIGHT Learn More

R-1695 TRUTZSCHLER DK903 IDF CARDING, YEAR 2002

ITEM 001
TRUTZSCHLER DK903 IDF CARDING
MAKE: TRUTZSCHLER
MODEL: DK903 IDF
YEAR: 2002
INTEGRATED DRAW FRAMES: AVAILABLE
CCD: AVAILABLE
CFD: AVAILABLE
CHUTE FEED TYPE: DFK
CAN HEIGHT: 45”
WASTE COLLECTION: CONTINUOUS
EXHAUST / WASTE SUCTION: UPWARDS
NO OF LICKER IN: 3
FLAT TYPE: ALUMINUM
ST FLAT FRONT: 2
ST FLAT BACK: 3
MATERIAL PROCESS: COTTON

QUANTITY: 12

ITEM 002
TRUTZSCHLER DK903 IDF CARDING
MAKE: TRUTZSCHLER
MODEL: DK903 IDF
YEAR: 2002
INTEGRATED DRAWFRAME: AVAILABLE
CCD: AVAILABLE
CFD: AVAILABLE
CHUTE FEED TYPE: DFK
CAN HEIGHT: 45”
WASTE COLLECTION: CONTINUOUS
EXHAUST / WASTE SUCTION: UPWARDS
LICKER IN: 3
FLAT TYPE: ALUMINUM
ST FLAT FRONT: 3
ST FLAT BACK: 5
MATERIAL PROCESS: SYNTHETIC

QUANTITY: 4

Learn More

REFERENCE NUMBER: M-0758 XMK-1500 RECYCLING LINE CAPACITY 1200-1500 KGS PER HOUR QUANTITY AVAILABLE: 1 Learn More

C-4026 NUOVO PIGNONE GAS TURBINE, 11 MW AND CONDENSING TURBO GENERATOR SETS, 44.5 MW, YEAR 2002

OFFER 001
11.7 MWE GAS TURBINE-GENERATOR SETS
GAS TURBINES
MANUFACTURER: NUOVO PIGNONE
MODEL: PGT10B-1
TYPE: MULTI-SHAFT, HEAVY DUTY GAS TURBINE
FUEL: NATURAL GAS

OFFER 002
ALTERNATOR
MANUFACTURER: ANSALDO
APPARENT POWER: 13,569 KVA
ACTIVE POWER: 11,000 KW
POWER FACTOR: 0.8
RATED SPEED: 1,500 RPM

OFFER 003
65.7 TPH WASTE HEAT RECOVERY BOILERS
BOILERS
MANUFACTURER: MACCHI
THERMAL RATING: 55,330 KW
NET THERMAL EFFICIENCY. COP: 90.32%
NET THERMAL EFFICIENCY. COV: 92.48%

OFFER 004
44.5 MW CONDENSING TURBO-GENERATOR SET
STEAM TURBINE
MANUFACTURER: NUOVO PIGNONE
MODEL NUMBER: HNK 50/3.2
CONFIGURATION: 1 IMPULSE STAGE 62 REACTION STAGES
RATED POWER: 44,500 KW
RATED INLET FLOW: 131,400 KG/H

OFFER 005
GENERATOR
MANUFACTURER: JEUMONT INDUSTRIE
RATED APPARENT POWER: 51,500 KVA
POWER FACTOR: 0.8
ACTIVE POWER: 41,200 KW

OFFER 006
CONDENSER
MANUFACTURER: CALDEMON
TYPE: SURFACE CONDENSER

QUANTITY: 2

Learn More

REFERENCE NUMBER: M-1246 COMPLETE RING SPINNING PLANT OF 17136 SPINDLES COMPLETE RING SPINNING PLANT OF 17136 SPINDLES CONSISTING OF BLOWROOM CARDING WASTE COLLECTION DEPARTMENT DRAW FRAME ROVING (SPEED FRAME) RING FRAME AUTO CORO WINDING YARN CONDITIONING MACHINES HUMIDIFICATION PLANT TESTING LAB ROVING OPENER (FOR SPEED FRAME BOBBINS) MACHINE SHOP WEIGH SCALES UTILITIES QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-0630 SIMA PROMATECH EXTRUSION LINE EXTRUSION LINE MADE BY SIMA/PROMATECH AND ESSENTIALLY CONSISTING OF: EXTRUDER 130mm DIAMETER AUTOSCREEN GEAR PUMP DIE 1700mm CHILL ROLL DIAMETER: 450 X 1800 AND AIR KNIFE CUTTING UNIT FIRST GODET, 3 ROLLS, DIAMETER 315 X 1650mm, PLUS 1 NIP ROLL STRETCHING OVEN 5000 X 1600 SECOND GODET, 6 ROLLS, DIAMETER 315 X 1650mm, PLUS 2 NIP ROLLS FIBRILLATOR UNIT ANNEALING GODET, 9 ROLLS + NIP ROLL CENTRAL CABINET HOT OIL EQUIPMENT FOR ANNEALING GODET WASTE SUCTION EQUIPMENT AS NEW QUANTITY AVAILABLE: 1 Learn More

TT-5555 EREMA INTAREMA 1714 TVEPLUS COMPLETE RECYCLING PLANT, YEAR 2017, 50Hz COMPLETE RECYCLING EREMA INTAREMA 1714 TVEPLUS YEAR 2017 AND WAS STARTED UP FOR THE FIRST TIME IN 2018 TYPE SELLING BRAND EREMA MODEL INTAREMA 1714 SINCE YEAR 2017 QUANTITY: 1 Learn More