Search results for: 'punch press'

REFERENCE NUMBER: F-1234 NEEDLE PUNCHED NONWOVEN PRODUCTION LINE 4500mm QUANTITY: ONE PRODUCTION LINE Learn More

REFERENCE NUMBER: M-3471 (880OKRSHH7) L NEEDLE PUNCHED NONWOVEN PRODUCTION LINE 4500mm TECHNICAL DATA: RAW MATERIALS: NYLON, POLYESTER, POLYPROPYLENE, GLASS FIBER, ETC. FINENESS OF FIBER: 2.5 TO 10DENIER LENGTH OF FIBER: 38 TO 76mm MIXING RATIO BETWEEN TWO FIBERS: 20 TO 100% SPEED: 6m/min (PER 2.5-6D× 38-51mm) MAX. 5000 KG/DAY (PER 22 HOURS/DAY) RANGE OF GRAM WEIGHT: 100 TO 250g/m2 CARDING MACHINE FEATURES ARE ACCORDING GRAM WEIGHT: 250G/M², 300G/M² PROCESS FLOW CHART: BALE OPENER---PER-OPENER—FINE OPENER--FEEDER---CARDING MACHINE-- CROSSLAPPER--TRANSIT APRON---HIGH-SPEED PRE-NEEDLE LOOM---(2) HIGH-SPEED MAIN NEEDLE LOOM--CALENDER---CUTTER AND REWINDER QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-8444 PUNCHING MACHINE MODEL FST 11 MACHINE AVAILABLE FOR AUTOMATIC DRILLING IN SHEETS OF PU FOAM, MEMORY FOAM, LATEX, EVA, NEOPRENE. WITH 20mm THICKNESS UP 2 DRILLINGS PER SECOND ARE PERFORMED; E.G.: ONE MOULD FOR 2mm DIAM. HOLES AND 50mm WHEEL BASE OF PUNCH, 7mm X 3.5 CROSSED HOLE PITCH: THE MACHINE WILL PERFORM NO 2310 HOLES EACH DRILLING CYCLE WITH 4620 HOLES PER SECOND IN TOTAL. THAT MEANS THE MACHINE CAN DRILL A FOAM SHEET DIM. 1000X1100mm EACH 20 SECONDS WITH 92400 HOLES IN TOTAL. TWO DRILLING TYPES ARE POSSIBLE: CONTINUOUS DRILLING “A-PERFORM” (NO DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS –SEE TAB. 31A); CONTINUOUS DRILLING “B-PERFORM” (WITH FIXED DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS). THE DISTANCE CAN BE MODIFIED BY OPERATOR). UP TO 150 20mm-THICKNESS MATTRESSES CAN BE PRODUCED IN ONE HOUR; BY INCREASING THE THICKNESS THE PRODUCTION WILL REDUCE. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-8444-A PUNCHING MACHINE MODEL FST 11 FOR LATEX MACHINE AVAILABLE FOR AUTOMATIC DRILLING IN SHEETS OF PU FOAM, MEMORY FOAM, LATEX, EVA, NEOPRENE. WITH 20mm THICKNESS UP 2 DRILLINGS PER SECOND ARE PERFORMED; E.G.: ONE MOULD FOR 2mm DIAM. HOLES AND 50mm WHEEL BASE OF PUNCH, 7mm X 3.5 CROSSED HOLE PITCH: THE MACHINE WILL PERFORM NO 2310 HOLES EACH DRILLING CYCLE WITH 4620 HOLES PER SECOND IN TOTAL. THAT MEANS THE MACHINE CAN DRILL A FOAM SHEET DIM. 1000X1100mm EACH 20 SECONDS WITH 92400 HOLES IN TOTAL. TWO DRILLING TYPES ARE POSSIBLE: CONTINUOUS DRILLING “A-PERFORM” (NO DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS –SEE TAB. 31A); CONTINUOUS DRILLING “B-PERFORM” (WITH FIXED DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS). THE DISTANCE CAN BE MODIFIED BY OPERATOR). UP TO 150 20mm-THICKNESS MATTRESSES CAN BE PRODUCED IN ONE HOUR; BY INCREASING THE THICKNESS THE PRODUCTION WILL REDUCE. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-5887 COMPLETE CONTINUOUS FOAM PROCESSING PLANT QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5212 (131311DCP12UC) L MARTINDALE ABRASION AND PILLING TESTERS MARTINDALE ABRASION AND PILLING TESTERS MODEL: C13C TO DETERMINE THE ABRASION AND PILLING RESISTANCE OF ALL KINDS OF TEXTILE STRUCTURES SAMPLES ARE RUBBED AGAINST KNOWN ABRADENTS AT LOW PRESSURES AND IN CONTINUOUSLY CHANGING DIRECTIONS AND THE AMOUNT OF ABRASION OR PILLING IS COMPARED AGAINST STANDARD PARAMETERS. THE UNIQUE DESIGN ALLOWS REMOVAL OF INDIVIDUAL SAMPLE HOLDERS FOR EXAMINATION WITHOUT LIFTING THE TOP MOTION PLATE STANDARD SAMPLE HOLDERS AND 9 AND 12KPA WEIGHTS ARE INCLUDED FEATURES: FIVE TEST PATTERNS (24 x 24, 24 x 60, 60 x 60 LISSAJOUS FIGURE CURVE, 60, 24 STRAIGHT LINE PATTERN) TWO KINDS OF COUNTING METHODS, POSITIVE COUNTING AND NEGATIVE COUNTING METHOD GUIDE PLATE DESIGN WITHOUT TURNING OVER, SAMPLE WITHOUT MOVEMENT PLC MODULARIZATION CONTROL, SEVEN INCHES COLOR TOUCH SCREEN SERVO SYSTEM SYSTEMATIC ELECTRIC MOTOR IS WITH STABLE OPERATION AND WITHOUT NOISE FULL ALUMINUM COVER PLATE, MODULES OF STAINLESS STEEL GRINDING HEAD AND HEAVY PUNCH, ETC. KEY SPECIFICATIONS: CONTROL MODE: PLC CONTROL AND TOUCH SCREEN DISPLAY COUNTER RANGE: 0 – 999999 TIMES RELATIVE MOVEMENT SPEED (HOLDER AND PLATFORM): 50±2R/MIN (20-70R/MIN SETTABLE) SAMPLING HAMMER MASS: 2385±10G WEIGHT: 148KG DIMENSION: 89 x 72 x 65CM STANDARDS: ISO 5470, ISO 12945, ISO 12947, ASTM 4966/4970 STANDARD ACCESSORIES: WEIGHT 9 AND 12 KPA STANDARD ABRADENTS FABRIC – 2 PCS FOR EACH HEAD STANDARD BACKING FOAM 38mm BOX OF 60PCS STANDARD WOVEN FELT DISCS 140mm – 2 PCS FOR EACH HEAD STANDARD WOVEN FELT DISCS 90mm – 2 PCS FOR EACH HEAD PHOTOGRAPHS (COPY ONE) ENGLISH MANUAL CERTIFICATE OF QUALITY OPTIONAL ACCESSORIES: SAMPLE CUTTER 38mm, 90mm, 140mm PHOTOGRAPHS (MADE IN UK) QUANTITY: 1 Learn More

REFERENCE NUMBER: M-5147 (1212NDTYXX11) L COTTON PAD MAKING MACHINE PUT ON MAKE-UP THE COTTON AND KAPOK PRODUCTION PROCESS: THE EQUIPMENT IS DIVIDES CUTS THE GOOD DEGREASING TO LAP, THE ADHESIVE-BONDED CLOTH OR THE GAUZE, LAYING ASIDE RAW MATERIAL AFTER THE COMPACTION, THE HEATING EMBOSSES, ROLLS CUTS PROCESS ONE TIME TO COMPLETE. MAIN FEATURE THE HIGH SPEED PUNCH PRESS REVOLVING BLANKING PRINCIPLE OF WORK, THE TECHNOLOGY IS MATURE, THE WORK IS STABLE, THE SERVICE WORK LOAD ARE FEW, OUTPUT MODE: THE PIPELINE ARRANGEMENT OUTPUT, THE CODE FALLS NEATLY, THE BAGGING IS CONVENIENT, A PERSON THEN OPERATES THE COMPLETE MACHINE, BIG REDUCED ARTIFICIAL AMOUNT OF USE; THE GOOD MAN-MACHINE OPERATION CONTACT SURFACE, MAY UNFOLD THE REAL TIME OPERATION INFORMATION, IS ADVANTAGEOUS FOR THE PRODUCTION MONITORING; THE MOLD REPLACEMENT IS CONVENIENT, THE CONSTRUCTION COST IS LOWER THAN GREATLY ROLLS CUTS THE CARVING FLOWER CUTTER BAR, MOREOVER AFTER THE MOLD WEARS, EASY TO REPAIR, DOES NOT NEED TO DISCARD THE REPLACEMENT, SAVES THE MAINTENANCE COST. PUT ON MAKE-UP THE COTTON AND KAPOK MAJOR TECHNIQUE PARAMETER: PRODUCTION SPEED: 20--30M/MIN PRODUCTION SPECIFICATION: MAY ACCORDING TO THE REQUEST ADJUSTMENT TOTAL POWER: 5KW MACHINE DIMENSION: 3.5M*1.7M*2.5M MODEL: A QUANTITY: 1 Learn More