Search results for: 'Machine fl'

REFERENCE NUMBER: J-2326
QUILTER FOR RAGS, 12 INCH WIDTH – NEW – RAG QUILTER

QUILTING MACHINE FOR RAGS
SEWS RAGS CONTINUOUSLY
SEW HEAD: 7 NEEDLES AND 7 LOOPERS 
MAKES A CHAIN STITCH ON THE CONVEYED RAGS
USES OVERLOCK THREAD
DISTANCE BETWEEN NEEDLES: 250mm (ENSURES THAT EVEN SMALL RAGS ARE SEWN)
1 HP MOTOR, 3-PHASE, 220 VOLT
WITH FREQUENCY INVERTER TO ADJUST THE ROTATION SPEED OF THE MOTOR AS NEEDED
HEIGHT: 1800mm
WIDTH: 960mm
DEPTH; 370mm
CONVEYOR WIDTH: 200mm
CONVEYOR LENGTH: 1560mm
MACHINE TOTAL LENGTH WITH CONVEYOR: 2800mm

AFTER SEWING, THE QUILT IS TRANSPORTED OUT INTO ROLLS WHICH CAN BE CUT ACCORDING TO CUSTOMER NEEDS
OPERATION: PLACE A LARGER RAG AS THE BOTTOM LAYER, SMALLER RAGS AS FILLING, AND ANOTHER LARGER RAG AS THE TOP LAYER. OPERATION REQUIRES 2 TO 3 OPERATORS.
TO REDUCE THE NUMBER OF OPERATORS REQUIRED, A FIBER ROLL AS CAN BE USED AS THE LOWER LAYER. THIS ALSO INCREASES THE PRODUCTION RATE.
DAILY PRODUCTION: VARIES BETWEEN 300 TO 500 KG PER 8 HOURS OF OPERATION
FOR KNIT FABRICS SUCH AS COTTON, VISCOSE, SWEATSHIRT FLEECE, NYLON STRETCH-FABRIC, PIQUET AND POPELINE
THERE IS NO MATERIAL WASTE AS THE MACHINE USES 100% OF THE RAGS
WORKING WIDTH: 12 INCHES
NEEDLE SPACING: 1 INCH
WITH LOOPER STRUCTURE SIMILAR TO THE DIAGRAM BELOW (REDUCES BOTTOM THREAD BREAKAGE)
MACHINE IS NEW, MADE TO ORDER
LEAD TIME: 10 DAYS

TEXPA AUTOMATIC FLAT SHEET CUT, SEW & FOLD MACHINE
MODEL LN-QSN-FA-204-2000/1
YEAR 2000
QUANTITY: 1

TEXPA AUTOMATIC FITTED SHEET CUT, SEW & FOLD MACHINE
MODEL QSNN.240-2000/1
YEAR 2000
QUANTITY: 1

TEXPA AUTOMATIC FITTED SHEET FOLDER
MODEL FA.254
YEAR 2000
QUANTITY: 1

TEXPA AUTOMATIC PILLOWCASE CUT, SEW & FOLD MACHINE
MODEL LN-QSFRNNW1-DA-261-2000/1
YEAR 2000
QUANTITY: 1

REFERENCE NUMBER: L-6069

EASTMAN STATIC TABLE CUTTING MACHINE MODEL M9000, 20’ X 72’, YEAR 2009

STATIC TABLE CUTTING MACHINE

MAKE: EASTMAN

MODEL: M9000

20 FEET LONG X 72 FEET WIDE

PURCHASED IN YEAR 2009

220 VOLT, 1 PHASE

QUANTITY: 1

REFERENCE NUMBER: P-2353
MACHINE WIDTH 3600mm
WIDTH: 3600mm
RECONDITIONED IN 1994>
QUANTITY: 1

REFERENCE NUMBER: P-4421

REFERENCE NUMBER: L-4933

FADIS TU WINDING MACHINE. 56 POSITIONS, YEAR 2001

QUANTITY: 1

S-1197 LAUNDRY SOAP PRODUCTION LINE, CAPACITY 1000 TO 1500 KG/HR

LAUNDRY SOAP PRODUCTION LINE
CAPACITY: 1000 TO 1500 KG/HR
I. PROJECT INSTRUCTION
THIS PRODUCT LINE IS A SOAP COMPLETE LINE STARTING FROM OIL MELTING, SAPONIFYING, VACUUM DRYING AND COOLING, MILLING SOAP NOODLES, VACUUM EXTRUDING AND THEN CUTTING INTO SOAPS.
THIS PRODUCT LINE HAS ADVANCED TECHNOLOGY INCLUDING COVERING LESS FLOOR AREA, CONSUMING LESS ENERGY, SAVING HUMAN RESOURCES, AUTOMATING PROCESSES, PRODUCING HIGH QUALITY SOAPS WITH 50 TO 80% FATTY ACID CONTENT.
PLEASE NOTICE THAT:
IT IS A TURN-KEY PROJECT. THE PROFESSIONAL TEAM PROVIDE YOU ALL MACHINES AND ACCESSORIES, THE WHOLE PROCESS OF PRODUCTION, FORMULA, LAYOUT DESIGN, MACHINES INSTALLATION, PRODUCTS TRIAL ETC. ALL SOLUTION ACCORDING TO YOUR REQUIREMENTS.
THE QUOTATION INCLUDES ALL EXCEPT: BOILER, WORKSHOP BUILDING, HEAT INSULATING MATERIAL, WIRES, PACKING MACHINE, AND CONSUMABLE MATERIALS FOR INSTALLING (WELDING ROD, CRANE, ELECTRIC WELDER, ETC.).

1. PRODUCTION REQUIREMENTS:
A. STEAM BOILER: 2 MT/HR.
B. WORKSHOP AREA: LARGER THAN 300 M². (L: 35M, W: 7M, H: 7M)
C. POWER: 130 KW, 380 V, 50 HZ.
D. WATER: CIRCULATING WATER FOR VACUUM DRYING SYSTEM: 40 M3; PRODUCTION WATER.
E. CAPACITY: 1000 TO 1500 KG/HR, 8 TO 12 TON/DAY (8 HR/DAY). OIL CONSUMTION: 5 TO 8 TON/DAY.
F. WORKER: 10 TO 12 WORKERS.
2. MATERIAL AND CONSUMING FOR PRODUCING SOAP:
OIL OR FAT OF PLANT OR ANIMAL (PALM OIL, COCONUT OIL, TALLOW OIL, ETC.), CAUSTIC SODA (NAOH), SODIUM-CHLORIDE (NACL), SODIUM SILICATE, FRAGRANCE, PIGMENT, ETC.
3. PRODUCTION PROCESS:
MIX AND MELT OIL --> SAPONIFICATION --> ADD OTHER INGREDIENTS --> VACUUM DRYING --> SOAP NOODLE --> GRINDING --> VACUUM EXTRUDING --> CUTTING.

III. SPECIFICATIONS AND QUOTATION OF EQUIPMENT
1. CARBURETION WORKSHOP:
MIX KINDS OF OIL TOGETHER ON THE BASIS OF THE FORMULA. DEPOSIT AND TAKE OUT THE UNSAPONIFIABLES.

ITEM 001
CARBURETION POOL
MIX KINDS OF OIL TOGETHER ON THE BASIS OF THE FORMULA.
VOLUME: 10 M3.
FIELD WORK
QUANTITY: 1

ITEM 002
STORAGE TANK FOR REFINE OIL
SIZE: Φ2000X2600, 8.2 M3;
FEATURE: WITH COILER INSIDE.
QUANTITY: 1

ITEM 003
WATER PUMP, OIL PUMP, CAUSTIC SODA PUMP
POWER: 1.5 KW/SET.
QUANTITY: 4

ITEM 004
SEAMLESS TUBE
(Φ76X3.5) (Φ57X3.5), ETC.
QUANTITY: SEVERAL

ITEM 005
VALVE
Φ65, Φ40, ETC.
QUANTITY: SEVERAL

ITEM 006
FLANGE, SCREW, ELBOW, GASKET.
QUANTITY: SEVERAL

2. OIL AND FAT SAPONIFICATION WORKSHOP:
OIL AND ALKALI DO REACTIONS IN THE SAPONIFICATION CAULDRONS. IT IS A GOOD COMBINATION OF FOUR SAPONIFICATION CAULDRONS, WATER CIRCULATES FROM NO. 1 CAULDRON TO NO. 4, IT SAVES WATER, NAOH AND NACL AT THE MOST.

ITEM 007
SAPONIFICATION CAULDRON
SAPONIFICATION BETWEEN OIL AND NAOH, LASTING ABOUT 40 TO 60 HRS. SUFFICIENT REACTION. SAVE WATER.
SIZE: Φ2800 X 3000, 20 M3
AUXILIARY FACILITIES: LIQUID CAUSTIC SODA POOL.2 M3
FIELD WORK
QUANTITY: 4

ITEM 008
HIGH TEMPERATURE AND HIGH PRESSURE SOAP PUMP
POWER: 5.5 KW/SET
QUANTITY: 3

ITEM 009
SEAMLESS TUBE
(Φ76X3.5)(Φ57X3.5), ETC.
QUANTITY: SEVERAL

ITEM 010
VALVE
Φ76, Φ48, ETC.
QUANTITY: SEVERAL

ITEM 011
FLANGE, SCREW, ELBOW, GASKET.
QUANTITY: 1

3. SOAP VACUUM DRYING SYSTEM:
TO MAKE SOAP MATERIALS FLASH DRY AND COOL INSTANTLY. TO CONTROL THE FATTY ACID CONTENT FROM 50% TO 80%. TO IMPROVE THE QUALITY OF SOAP MATERIALS.

ITEM 012
INGREDIENTS MIXTURE TANK
PUT ESSENCE, PIGMENT IN THE LIQUID SOAP. HEATING AND MIXING
SIZE: 1.8 M3, Φ1200X1500
FEATURE: WITH PIPE LINER, HEATING AND MIXING
POWER: 4 KW/SET.
QUANTITY: 2

ITEM 013
HEAT EXCHANGER
HEAT THE LIQUID SOAP RAPIDLY
SIZE: Φ325 X 4000
QUANTITY: 1

ITEM 014
VACUUM SPRAY DRYER
THE VACUUM DRYER MAKES THE SOAP FLAKES THINNER AND EVENER, AND COOLS THEM DOWN MORE QUICKLY, TO IMPROVE THE QUALITY OF SOAP NOODLES.
ADOPT HARD TOOTH SURFACE GEAR REDUCER AND THE OIL PUMP INSIDE LUBRICATES AUTOMATICALLY AND MAKES A LONG LIFESPAN. THE THICKNESS OF BARREL IS 14 MM, THE INNER WALL IS PROCESSED BY VERTICAL LATHE TO ACHIEVE THE COAXIALITY AND SMOOTH SURFACE. THE SHAFT IS MADE BY A Φ108 X 14mm SEAMLESS TUBE. THE NOZZLE (Φ10mm) IN THE SHAFT SPRAYS SOAP MATERIALS, AND THE THREE BLADES SCRAPE THEM DOWN, AND THE SOAP MATERIALS DRY OUT FAST AND UNIFORM. THE WHOLE SET OF VACUUM SYSTEM CAN MAKE SOAPS WITH FATTY ACID CONTENT FROM 55% TO 80%.
1. TYPE: XSD-1000
2. CAPACITY: 1000 TO 1500 KG/HR
3. BARREL DIAMETER: Φ 1200mm
4. MOUTH DIAMETER: 10mm
5. SPEED: 13 R/MIN
6. POWER: 3 KW
7. DIMENSION: Φ 1600 X 4500mm
8. WEIGHT: 3200 KGS
QUANTITY: 1

ITEM 015
FINE SEPARATORS
SEPARATE THE SOAP POWDER FROM THE WATER WHEN VACUUM DRYING
QUANTITY: 2

ITEM 016
BAROMETRIC CONDENSER
CONDENSE WATER FROM THE SOAP
QUANTITY: 1

ITEM 017
ELIMINATOR
DRAW OFF WATER
QUANTITY: 1

ITEM 018
PELLETIZER
IT IS USED TO PRESS THE VACUUM-DRIED SOAP MATERIALS INTO SOAP NOODLES. LONG DOUBLE SCREWS TURN INWARD TO DRIVE SOAP MATERIALS TO EXTRUDE SOAP NOODLES THROUGH PORE PLATES.
1. TYPE: XSN-1000
2. CAPACITY: 1000 TO 1500 KG/HR
3. SCREW DIAMETER: Φ 230mm X 2
4. POWER: 15 KW
5. DIMENSION: 3100 X 1200 X 1550mm
6. WEIGHT: 3000 KGS
QUANTITY: 1

ITEM 019
STAGE VACUUM PUMP
KEEP THE VACUUM SYSTEM IN VACUUM STATE
POWER: 15 KW
QUANTITY: 1

ITEM 020
BUFFER TANK OF VACUUM PUMP
PROTECT THE VACUUM PUMP FROM STEAM WATER
SIZE: Φ600 X1200
QUANTITY: 1

ITEM 021
SOAP PUMP, WATER PUMP
SOAP PUMP: SPECIAL CONSTRUCTURE, DRAW LIQUID SOAP FROM INGREDIENTS MIXURE TANK TO HEAT EXCHANGER. POWER: 7.5 KW
WATER PUMP: FOR WATER CIRCULATING. POWER: 5.5 KW
QUANTITY: 2

ITEM 022
SEAMLESS TUBE AND VALVE
Φ76 Φ48, ECT.
QUANTITY: SEVERAL

ITEM 023
FLANGE, SCREW, ELBOW, ETC.
QUANTITY: SEVERAL

4. FINISHING LINE:
MILL SOAP NOODLES TWICE, VACUUM EXTRUDING SOAP BAR, CUT SOAP CAKES, AT THE SAME TIME STAMP LOGO ON SOAP CAKES.

ITEM 024
THREE-ROLL GRINDING MILL
THREE-ROLL GRINDING MILL IS USED TO GRIND, PRESS THE MATERIAL TO INCREASE ITS DENSITY AND QUALITY.
1. ROLL DIAMETER: Φ260
2. ROLL LENGTH: 780mm
3. MOTOR POWER: 7.5KW
4. ROLL SPEED RATIO: 1:3:9
5. DIMENSION: 1500 X 1200 X 1000mm
6. WEIGHT: 2400 KGS
QUANTITY: 2

ITEM 025
VACUUM PLODDER
VACUUM PLODDER IS USED TO GRIND, REFINE AND PRESS SOAP MATERIAL INTO SOAP BAR. THE ABOVE AND BELOW SCREWS AND TWO ORIFICE PLATES PRESS AND REFINE THE SOAP MATERIAL AND MAKE THE SOAP BAR TIGHT AND THE SURFACE BRIGHT.
THE MOTOR AND THE REDUCER ARE SEPARATED, FOR LONG LIFE-SPAN AND MAINTENANCE. THE BELOW SCREW’ SPEED IS ADJUSTABLE TO REGULATE THE PRODUCTION CAPACITY. THE VACUUM CHAMBER HAS A VISION GLASS TO WATCH THE INNER, THE VACUUM METER TESTS THE VACUUM DEGREE. THE HEATER INSIDE THE OUTLET ADOPT AUTOMATIC TEMPERATURE CONTROL SYSTEM. THE JACKETS OF THE ABOVE AND BELOW BARRELS ARE CONNECTED TO A CIRCULATING WATER SOURCE.
1. TYPE: XS-1000
2. CAPACITY: 1000 TO 1500 KG/HR
3. DIAMETER OF SCREW: Φ230mm
4. SPEED: TOP 15; BOTTOM: 12 TO 18
5. POWER: TOP: 11 KW; BOTTOM: 15 KW
6. DIMENSION: 4350 × 1200 × 2630mm
7. WEIGHT: 4500 KGS
QUANTITY: 1

ITEM 026
ELECTRONIC
CUTTING MACHINE
SOAP ELECTRONIC CUTTING MACHINE IS USED TO CUT SOAPS INTO CAKES AND STAMP PATTERNS ON THE SOAP. ADOPT DELTA SERVO MOTOR AND CONVERTER, VOLTAGE STABILIZER AND PRECISION PURIFIED AC VOLTAGE STABILIZER, TO PROTECT MOTOR AND ELECTRICAL COMPONENTS AND TO KEEP HIGH ACCURACY.
THE MOULD WHEELS RUN BY THE MOVING OF SOAP BAR FROM VACUUM PLODDER. BECAUSE OF THE ELECTRONIC TRACKING SYSTEM, IT CAN CUT SOAP BARS WITH ANY SIZES AND WEIGHT AFTER SETTING THE COMPUTER.
THE CHARACTERS AND THE SHAPE OF SOAP IS CLEAR AND NEAT
THE SIZE AND PATTERN ARE DESIGNED ACCORDING TO CUSTOMERS’ REQUIREMENTS
1. SIZE AND WEIGHT: ADJUSTED BY CUSTOMER’S REQUIREMENTS
2. POWER: 2 KW, 380 V, 50 HZ
3. CAPACITY: IN STEP OF VACUUM PLODDER
4. MOULD: WITH ONE SET
5. DIMENSION: 1000 × 400 × 1200mm
6. WEIGHT: 100 KGS
WOODEN CASE
QUANTITY: 1

ITEM 027
CONVEYORS
APPEARANCE IS GOOD AND OPERATION IS STABLE, NON-NOISE AND ANTI-DUST
MOTOR: 1.1 TO 1.5 KW/PCS
QUANTITY: 4

ITEM 028
VACUUM PUMP
FOR VACUUM PLODDER
POWER: 2.35 KW
QUANTITY: 1

5. OTHERS

ITEM 029
EQUIPMENT SUPPORT, OPERATING PLATFORM, LADDER, ETC.
USED IN CARBURATION POOL, SAPONIFICATION CAULDRONS, AND VACUUM SYSTEM
QUANTITY: 1

ITEM 030
DISTRIBUTION BOX
CONTROL MACHINES, BIG BRAND ELECTRICAL COMPONENTS
WOODEN CASE
QUANTITY: 4

6. ADDITIONAL MACHINES AND SPARE PARTS

ITEM 031
ELECTRICAL CABLES
ALL WIRES FROM EACH MACHINE TO THE FOUR DISTRIBUTION BOXES. THE MAIN WIRE FROM THE FOUR DISTRIBUTION BOXES TO THE MAIN DISTRIBUTION BOX AND SLEEVES ARE NOT INCLUDED
QUANTITY: 1

ITEM 032
HEAT INSULATING MATERIAL
ABOUT 450 M3, INCLUDING GALVANIZED SHEET 450 M3. GLASS WOOL CLOTH, NAILS
QUANTITY: 1

ITEM 033
WELDING ROD
ABOUT 50 BOXES, 1 TON.
QUANTITY: 1

ITEM 034
STEAM BOILER
MATERIAL: DIESEL OIL.
RATED POWER: 2000 KG/H
RATED PRESSURE: 1.25 MPA
RATED STEAM TEMPERATURE: 194 ℃
THE QUOTATION IS FOR ONE WHOLE SET OF BOILER, INCLUDING THE STEAM BOILER, WATER TREATMENT EQUIPMENTS, WATER BOXES, OIL BOXES, PUMPS, AND SOME SPARE PARTS
THE QUOTATION INCLUDES SALARY OF BOILER ENGINEER'S INSTALLATING AND TESTING
THE AIR TICKET AND ACCOMMODATION ARE NOT INCLUDED
LOADED BY A 40 'GP CONTAINER
QUANTITY: 1

QUANTITY: 1 PLANT

REFERENCE NUMBER: V-1288

MERELLO ME-305PILLOW & QUILTS PACKAGING SYSTEM, 10 to 12 UNITS PER MINUTE YEAR 2009

WRAPS PILLOWS AND CUSHIONS BETWEEN 35X35 AND 150X70cm IN POLYETHYLENE TUBE, WITHOUT LATERAL SEALS

HIGH QUALITY BAGS, MORE ESTHETICAL AND VERY WELL ADJUSTED. INCLUDES OPTIONAL PRINTER FOR LABELS DIRECTLY ON THE BAG, PUNCHES HANDLES AND DETECTS CENTERED LOGOS. MINIMUM WASTE, ENERGY SAVINGS.

AUTOMATIC CYCLE: IN-FEED, WRAPPING, COMPRESSION AND SEALING. EASY AND FAST CHANGE OF THE ROLL, MÁX. ROLL: 500 mm.. CYCLE CONTROLLED BY PLC WITH TOUCH SCREEN. SURFACE OCCUPATION: 4.5X2M (EXTRA BIG DIMENSIONS AVAILABLE AS OPTION).

HIGH PRODUCTIVITY: 10/12 UNITS PER MINUTE

WELL-ENGINEERED MACHINE FOR FLATTENING AND WRAPPING CUSHIONS FOR “FLAT PACK” OPERATIONS

THIS IS IDEAL FOR STORING AND SHIPPING PILLOWS AND CUSHIONS IN A MINIMAL AMOUNT OF SPACE

AUTOMATICALLY WRAPS EVERY TYPE OF PILLOW BETWEEN 40CM x 40CM (16”x16”) TO 110CM x 80CM (42”x32”)

CYCLES UP TO 8 PER MINUTE

AUTOMATICALLY ADJUSTS TO VARYING SIZES

PLASTIC ROLLS ARE EASILY CHANGES

THE MACHINE FORMS A TUBE STYLE BAG FROM A POLYETHYLENE ROLL, WITH PERFECT SIZE ADJUSTMENT AND REQUIRES NO LATERAL SEALING. CHANGING THE POLYETHYLENE ROLL IS FAST AND EASY, AND DIFFERENT SIZES CAN BE USED WITHOUT ADJUSTMENT

CUTS ARE MADE BY A MAINTENANCE-FREE, SMOKELESS COLD BLADE

A TOUCH SCREEN PLC CONTROL DISPLAYS INPUT PARAMETERS AND CYCLE INFORMATION

ELECTRONIC INVERTER ENABLES SMOOTH MOTORIZED MOVEMENTS

OPTIONAL VIDEO JET THERMAL PRINTER CAN PRINT PRODUCT DATA AND BAR CODES DIRECTLY ON FINISHED PACKAGE

MACHINE DIMENSIONS ARE: 4.5M x 2M (14.75’ x 6.5’)

SAVES SPACE AND MATERIAL EXPENSE BY EXTRACTING AIR FROM THE BAG DURING PACKAGING PROCESS

QUANTITY: 1

REFERENCE NUMBER: P-4339

CYLINDRICAL ARTICLES FULLY AUTOMATIC PACKAGING MACHINE

Model: 626
SPECIFICATIONS
Packing speed:1-100bags/min
Packing length:70-400mm
Packing size: Max width:180mm  Max high:60mm
Voltage: AC 220V  50/60Hz
Power:3.5KW
Weight:1000KG
Machine size:4500mmx1650mmx950mm
Use extersion: Column type group packing goods like ham banger, ice, cream, noodle, etc.

MACHINE CHARACTERISTIC
Touchable  based, PLC double servo controlled, more safety and easiness
Free setting for bag length, automatic adjustment, convenient and accurate
All automatic electrical eye adjustment and press the button softly to change the category
Coule choose the automatic feed
Could choose the configuration manufactured date
Could choose the automatic feeder
Could choose the automatic hole making instrument
(Special manufacture based on the requirement from customer)

SPECIAL SET EQUIPMENT

A:All Automatic Feeder
Soft swaying lining and bring no damage to the product
Accurate computation, no fluctuation
Stainless material and confirm to the food manufacture requirement
Strong accommodation and suit the product of many diameter
B:Automatic Hole Maker
Round shape and beautiful outlook
Could set single hole, double hole, various meet
Collect the trash from making
Make hole by gas and has stable performance

QUANTITY: 1

M-6054 EXTRUSION PLANT FOR FOAMED PET, WORKING WIDTH SHEETS 610mm x 240mm

OFFER 001
EXTRUSION PLANT
FOR FOAMED PET
WORKING WIDTH: SHEETS 610mm x 240mm
THICKNESS: 5mm TO 60mm
DENSITY: 80 TO 250 KG/M3
CAPACITY: UP TO 500 KG PER HOUR

OFFER 002
SILO FOR VIRGIN MATERIAL

OFFER 003
DRYING SYSTEM (SUITABLE FOR 500 KG PER HOUR)

OFFER 004
GRAVIMETRIC FEEDING SYSTEM

OFFER 005
GAS STOCKING SYSTEM

OFFER 006
GAS FEEDING SYSTEM

OFFER 007
EXTRUDER

OFFER 008
SCREEN CHANGER

OFFER 009
STRAND DYE WITH ELEMENTS FOR EXTRUSION

OFFER 010
PNEUMATIC SHAPER FOR SHAPING THE BOARD BY ADJUSTING THE LOAD

OFFER 011
HAUL OFF UNIT

OFFER 012
ROLLERS FOR BOARDS CONVEYING

OFFER 013
PULLER HAUL OFF

OFFER 014
TRANSVERSAL CUTTING UNIT

OFFER 015
FINISHING EQUIPMENT

OFFER 016
BLOCK WELDING MACHINE

OFFER 017
FINISHING PLATFORM

OFFER 018
HORIZONTAL CUTTING MACHINE

OFFER 019
SHEETS WELDING MACHINE

OFFER 020
SCRAPS RECYCLING SYSTEM

OFFER 021
GRINDER TO MILL THE PIECES OF MATERIAL

OFFER 022
COMPACTING UNIT

OFFER 023
STORING SILOS FOR DENSIFIED FOAM PET

OFFER 024
PROCESS ELECTRIC SYSTEM OF EXISTING MACHINES ACCORDING TO THE ACTUAL LAYOUT

OFFER 025
CABLES AND CABLING MATERIALS

OFFER 026
PIPING

QUANTITY: 1 PLANT