Search results for: 'Blad'

REFERENCE NUMBER: M-0324 PROFILING MACHINE F2200 FOR FOAM MATTRESSES, MATTRESSES, MAXIMUM WIDTH 2200mm WORKING CUTTING WIDTH 2200mm WORKING CUTTING HEIGHT 20/200mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-0323 PROFILING MACHINE F2000 FOR FOAM MATTRESSES,MATTRESSES,MAXIMUM WIDTH 2200mm WORKING CUTTING WIDTH: 2000mm WORKING CUTTING HEIGHT: 20 / 180mm QUANTITY AVAILABLE: 1

Learn More

REFERENCE NUMBER: K-5243 (YOU MUST LOOK AT THE VIDEO, IT’S AMAZING) AUTOMATIC TRIMMING MACHINE FOR FOAM BLOCKS OR FOAM MATTRESSES, FOUR SIDES DESCRIPTION: PU SLABS CUT FROM FOAM BLOCK BY HORIZONTAL CUTTING UNDERGO PERIMETRICAL STRETCHING, (SOMETIMES A FEW CENTIMETERS STRETCHING). IN ORDER TO ACHIEVE SATISFACTORY SIZES (±1MM EACH SIDE) THE REMOVING OF IRREGULAR EDGES IS REQUIRED. THIS MACHINE TRIMS FOAM SLABS AND ALSO COUPLED SLABS. IT CAN BE PLACED AT THE END OF THE MATTRESS GLUING PLANT (MANUAL OR AUTOMATIC) OR BEYOND THE HORIZONTAL CUTTING MACHINE. THE COUPLED FOAM SHEETS ARE NOT ALIGNED AND NEED TO BE TRIMMED. OFTEN THE COUPLED MATTRESSES ARE TRIMMED ONE BY ONE ALONG THE FOUR SIDES WITH A MANUAL VERTICAL CUTTING MACHINE WASTING A LARGE AMOUNT OF TIME. THIS MACHINE AUTOMATICALLY TRIMS THE FOUR SIDES OF FOAM MATTRESSES WITHOUT ANY HANDLING; THAT MEANS AN ACCURATE TRIM AND SHORT PROCESSING TIME. QUANTITY AVAILABLE: 1 Learn More

T-9197 AUTOMATIC CUTTING MACHINE, CUTTING WIDTH 1mm TO 1580mm, SINGLE SHAFT AUTOMATIC CUTTING MACHINE SINGLE BLADE FOR SINGLE SHAFT SUITABLE FOR VARIOUS ROLL-STOCK MATERIALS SUCH AS PVC, MASKING, BOPP, FOAM TAPE, PROTECTION FILM, ETC. ROLLER WIDTH 1700mm CUTTING WIDTH 1mm TO 1580mm PAPER CORE I.D. 3'' BLADE DIAMETER MAXIMUM 450mm PRECISION +/-0.1mm POWER SOURCE 220 VOLTS 60 Hz 3 PHASE AIR SOURCE 5 KG (FURNISHED BY USER) QUANTITY: 1 Learn More

V-2170 GENERAL ELECTRIC (GE) STEAM TURBINE 615MW FOR PRODUCING ELECTRICITY STEAM TURBINE ONLY IS BEING OFFERED FOR SALE UNIT DETAILS: TURBINE SERIAL NUMBER: 270T764 GENERATOR SERIAL NUMBER: 290T764 RPM: 3600 TURBINE: DESIGN CODE: G12 CONTROL SYSTEM: MARK VI STAGES: 22 LSB LENGTH: 30” INITIAL STEAM TEMPERATURE: 1050F INITIAL STEAM PRESSURE: 3,515 PSIA EXHAUST PRESSURE: 3.45 HGA GENERATOR: CODE: L2D RATING: 750,000 KVA VOLTAGE: 21,000 POWER FACTOR: .9 AMPS: 20,620 EXCITER RATING/VOLTS: 605 AMOUNT OF STEAM NEEDED: 4,200,000 TONS PER HOUR, 3500 PSI YEAR OF THE MACHINE: MANUFACTURED BETWEEN 2009 AND 2016 (IT TAKES 5 TO 6 YEARS TO PRODUCE IT) TYPE OF STEAM TURBINE: IS IT A BACK PRESSURE OR EXTRACTION STEAM TURBINE TO PRODUCE LOW PRESSURE AND MEDIUM PRESSURE STEAM? [ANSWER] LOW AND MEDIUM STEAM PRESSURES IN PSI: [ANSWER] AMOUNT OF STEAM AVAILABLE FROM EACH PRESSURE LEVEL (IN POUNDS OR TONS): [ANSWER] SHIPPING DIMENSIONS: IT WILL OCCUPY A BULK SPACE FOR APPROXIMATELY 2500 TONS WEIGHT. IN ESSENCE, 25,000 TON SHIP NEEDS TO BE ENGAGED AND MOVING. QUANTITY: 1 Learn More

TT-3204 SINGLE SHAFT AUTO CUTTING MACHINE, WORKING WIDTH 1500mm (BALONEY SLITTER, SUITABLE FOR FILMS) SLITTER REWINDER MAX SLITTING WIDTH: 1600mm (CAN BE CUSTOMIZED FROM 800mm TO 3000mm) MINI SLITTING WIDTH: 10mm UNWINDING DIAMETER: 600mm REWINDING DIAMETER: 300mm AUTOMATIC CUTTING MACHINE FOR FILM ROLLS: AFTER YOU SET THE PARAMETER IT WOULD CUT THE FILM ROLLS TO SMALL WIDTH ROLLS AUTOMATICALY WORKING WIDTH: 1500mm LARGE ROLL MATERIAL DIAMETER MAX: 350mm NO PROBLEM FOR THIS MACHINE TO SLIT YOUR PVC FILM MATERIAL Learn More

YY-2144 MULTIFUNCTION COATING HEAD, 1650mm BY KNIFE OR 1750mm BY ENGRAVED ROLLER DETAILS: 1. COMBINED COATING MACHINE FOR ONE FINISHING AND COATING NOMINAL WIDTH 1800mm. MAXIMUM COATING WIDTH: BY KNIFE 1650mm, BY ENGRAVED ROLLER 1750mm WITH FOLLOWING WORKING MODES POSSIBILITIES: - REVERSE ROLL - SYNCHRO ROLL - REVERSE ROLL "ON AIR" - SYNCHRO ROLL "ON AIR" - BLADE "ON AIR" - BLADE ON COUNTER- ROLLER COMPOSED OF: - WELDED STEEL FRAMEWORK WITH HIGH; - ORSION RIGIDITY; - RUBBERIZED COUNTER-ROLLER DIAMETER 400mm, OIL AND SOLVENTS RESISTANT; - HARDNESS 85 SHORE A, MAX ECCENTRICITY TOLERANCE ±1/100mm; - A/C GEARMOTOR TO DRIVE THE COUNTER ROLLER; - ROLLER CHANGING DEVICE (BRIDGE), ARRANGED TO MOUNT TWO ENGRAVED ROLLERS AND ONE COATING KNIFE; - PNEUMATIC LIFTING OF CHANGING DEVICE (BRIDGE); - MANUAL ROTATION OF THE ROLLER CHANGING DEVICE; - MOTORIZED MICROMETRIC ADJUSTMENT OF COATING THICKNESS, INDEPENDENT RIGHT/LEFT OR IN TANDEM, WITH DIGITAL DISPLAY ON CONTROL PANEL, BY TWO JACKS; - COATING SIDE LIMITERS, MANUALLY ADJUSTABLE EITHER SINGLE OR TANDEM; - FEEDING THROUGH IN FRONT OF THE COATING KNIFE; - A/C GEARMOTOR TO DRIVE THE ENGRAVED ROLLER; - TWO COLOUR DOCTOR BLADES (SYNCHRO / REVERSE) WITH PNEUMATIC OPENING AND CLOSING FOR A SMOOTHER MOVEMENT OF THE BLADE TOWARDS THE ROLLER, WITH OSCILLATING MOVEMENT; - ENTRY IDLER ROLLER, THE UPPER ONE LIFTABLE BY PNEUMATIC PISTONS FOR "ON AIR" COATING; - PIPING FOR THE WASHING OF THE ENGRAVED ROLLER; - TWO SIDE GUTTERS IN STAINLESS-STEEL WITH TEFLON COATING, WITH SOLVENT RESISTANT RUBBER PIPE FOR WASTEWATER OR CHEMICALS COLLECTION AND RECIRCULATION; - WASTEWATER RECOVERY BASIN, WITH DRAIN, UNDER THE COUNTER-ROLLER; - MANUAL SEAM JUMPER; - VARIABLE SPEED FROM 2,5 TO 50 M/MIN FOR THE COUNTER-ROLLER AND FROM 2,5 TO 99 M/MIN FOR THE ENGRAVED ROLLER; - PIVOTING CONTROL PANEL WITH DIGITAL SCREEN, MOUNTED ON THE MACHINE FRAME, TO CONTROL AND SET THE MACHINE FUNCTIONS; - MAIN ELECTRICAL PANEL EQUIPPED WITH PLC AND INVERTERS, PROTECTION IP54, MOUNTED INSIDE THE LEFT HAND MACHINE SHOULDER; - SET OF MACHINE ACCESSORIES AND INSTRUCTION & MAINTENANCE MANUAL. Learn More

REFERENCE NUMBER: G-5661 ROTARY CUTTING MACHINE - NEW 1. USES THE CUTTING BETWEEN THE ROLLER ROTARY BLADES AND FIXED BLADE TO CUT YARN, FABRIC ETC. INTO SMALL PIECES. 2. LENGTH IS ADJUSTABLE FROM 5 CM-20 CM .SPEED CAN BE ADJUSTABLE ACCORDING TO CUSTOMERS’ REQUIREMENT. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-1441 CONVOLUTER MODEL BF WORKING CUTTING WIDTH: 2000mm (78.7") WORKING CUTTING HEIGHT: 20/180mm (7" MAXIMUM) HEIGHT ADJUSTABLE LOADING ROLLER-TABLE: 1000 X 2000mm (39.3" X 78.7") UNLOADING TABLE: 1000 X 2000mm (39.2" X 78.7") MAXIMUM WAVE HEIGHT: 5/80mm (3.14") BLADE BRAKE MOTOR: 4 KW CUTTING SPEED (MOTOR SPEED VARIATOR WITH ADJUSTABLE SPEED BY MEANS OF HAND-WHEEL): 13m/MIN POWER: 5.5 KW TENSION: 400V 50 HZ WEIGHT: 1800 KGS QUANTITY AVAILABLE: 1 Learn More

J-3943 CONVOLUTER, MAXIMUM WORKING WIDTH 2150mm (84”) DELIVERY 3RD WEEK OF NOVEMBER 2021 IN ALMOST NEW CONDITION LOCATED IN THE UNITED STATES CONVOLUTING WIDTH MAX: W 2150 mm (84") CONVOLUTING PIN DEPTH: 30 mm (1.18") CONVOLUTING RUNNING SPEED: 0 TO 25 RPM TOTAL POWER: 10.74 KW CUTTING SPEED: 0 TO 25 METERS PER MINUTE CUTTER BLADE TOTAL LENGTH: 9800 mm BLADE WIDTH x THICKNESS: 50mm x 0.65mm MACHINE WEIGHT: 2500 KG MACHINE OVERALL DIMENSIONS: 15.4 FEET WIDE X 4.1 FEET DEEP X 5 FEET TALL MAXIMUM HEIGHT OF FOAM: 200mm (8”) QUANTITY: 1 Learn More