Search results for: 'process equipment'

TT-1175 HENNECKE BFM COMPACT FOAMING LINE, 80 BUNS PER 8 HOUR SHIFT INCLUDES 3 MOLDS, DIMENSIONS 2100 x 2100 x 1400mm A COMPLETE LINE FOR DISCONTINUOUS PRODUCTION OF SLABSTOCK FOAM. THE BFM IS STATE-OF-THE-ART EQUIPMENT FOR PRODUCING FOAM WITH QUICK START UP, MINIMUM SPACE REQUIRED AND FLEXIBLE PRODUCTION. WITH THIS LINE POLYURETHANE FOAMS BLOCKS CAN BE PRODUCED, SUCH AS FOAMS FOR UPHOLSTERED FURNITURES, CUSHIONS, MATTRESSES, SEATS, SOFAS AND PACKAGING. WITH THIS MACHINE EVEN HIGH RESILIENCE HR, HYPER SOFT HS AND VISCO ELASTIC FOAMS CAN BE PRODUCED. BENEFITS WITH BFM COMPACT - A BROAD RANGE OF FOAM DENSITY 20 TO 50 KG/m3 - MANUFACTURE DIFFERENT TYPES OF POLYETHER BASED FOAMS - POSSIBLITY TO CONTROL MIXER SPEED => HIGH INFLUENCE ON CELL STRUCTURE - HIGH REPRODUCIBILITY, THANKS TO FORMULATIONS AND MODERN CONTROL SYSTEM - SIEMENS CONTROL PANEL - COMPACT DESIGN => SMALL SPACE REQUIREMENTS - AUTOMATIC FLUSHING WITH POLYOL AVOIDS THE COSTS OF DISPOSAL OF MIXTURE TECHNICAL DETAILS DIMENSIONS OF THE MACHINE WITHOUT MOULD: LENGHT APPROX: 5000mm WIDTH APPROX: 2350mm HEIGHT APPROX: 2550mm CAPACITY: DEPENDING ON QUANTITY AND SIZE OF THE MOULDS – ABOUT 80 RECTANGUAL BLOCKS PER 8-HOUR-SHIFT. AMOUNT OF MOULDS: 3 Learn More

T-9752 KARL MAYER CARBON MACHINES BIAXIAL AND MULTIAXIAL PROPERTIES: SINCE ALL FIBERS POINT IN ONE DIRECTION, THE SCRIM CAN BE IDEALLY DRAPED GOOD SOAKABILITY WITH LITTLE RESIN CONSUMPTION CAN BE DRAPED VERY WELL AROUND CURVES AND EDGES EASY TO CUT ELECTRICALLY CONDUCTIVE, INFUSIBLE HIGH STRENGTH AND RIGIDITY DUE TO GRAPHITE-LIKE FIBER STRUCTURE BIOCOMPATIBLE TRANSPARENT TO X-RAYS LOW SPECIFIC WEIGHT IDEAL FOR SURFACE USE (LITTLE FIBER IMPRINTS) IDEAL FOR PROCESSING WITH EPOXY RESIN! TEXTILE SEMI-FINISHED PRODUCTS MADE OF PRE-SPREAD AND PLANE-PARALLEL LAID FIBERS FORM THE GROUP OF UNIDIRECTIONAL FABRICS. THE FIBERS ARE USUALLY LAID AT 0°, MORE RARELY AT 90°. BY LAYING THE UD FABRICS ALONG THE LINES OF FORCE ACTING IN THE COMPONENT, THE LIGHTWEIGHT POTENTIAL OF THE CARBON FIBER IS OPTIMALLY EXPLOITED. UD FABRICS CONSIST OF ONE OR MORE SUPERIMPOSED FIBER LAYERS FIXED WITH AN EPOXY-COMPATIBLE BINDER THREAD. THE SPECIAL SPREADING TECHNIQUE PRODUCES FABRICS WITH HIGH FIBER PARALLELISM, WITHOUT KNOTS AND FIBER TWIST. SPREAD FIBERS ABSORB THE RESIN BETTER, RESULTING IN HIGHEST LAMINATE STRENGTHS. QUANTITY: 3 LINES Learn More

YY-1347 PSA OXYGEN GENERATION SYSTEM SCHEME, CAPACITY 50 m3 PER HOUR PURITY: ≥ 93%, FLOW RATE: 50M3 PER H, (PRESSURE: 200 BAR AUTOMATIC FILLING SYSTEM) Learn More

YY-1348 PSA OXYGEN GENERATION SYSTEM SCHEME, FLOW RATE 100 M3 PER HOUR DETAILS: PURITY: ≥ 93%, FLOW RATE: 100 M3 / H, (PRESSURE: 200 BAR AUTOMATIC FILLING SYSTEM) QUANTITY: 1 Learn More

REFERENCE NUMBER: M-5010 (12123GHBLSD11UN) L COMPLETE GLASS FIBER PROCESSING LINE FIBER PREPARATION & WEB FORMING EQUIPMENT CURING OVEN WITH ALL AUXILIARY EQUIPMENT, CROSS CUTTER, STACKER, AND WINDER RECUPERATIVE THERMAL OXIDIZER (RTO) TO TREAT OVEN EXHAUST DUST FILTRATION SYSTEM WITH RECYCLING OF FIBER AND RESIN PHENOLIC POWDER RESIN SUPPLY SYSTEM COMPLETE ELECTRIC CONTROL SYSTEM (SIEMENS S 7) FIBER BLEND CAPABILITIES: GLASS FIBER E GLASS UP TO STAPLE LENGTH OF 3 1/4 INCH 100% GLASS FIBER BLENDS WITH ANY MAN MADE FIBERS SUCH AS PET-PA OR RAYON GLASS FIBER BLENDS WITH ANY OF THE ABOVE PLUS ORGANIC FIBERS SUCH AS CELLULOSE, WOOD, NEWSPAPER, COTTON, AND ALL NATURAL FIBERS BI-CO FIBERS USED AS BINDER FIBER WITH A STAPLE LENGTH OF 2 INCHES AND A DTEX RANGE FROM 3 TO 10 MINIMUM BLEND RATIO IS 8% FOR EACH FIBER COMPONENT BLEND ACCURACY WITH THE USE OF OUR CONTROLS AND WEIGHING SYSTEM AS OFFERED +/- 2% WEB FORMING CAPABILITES: MINIMUM WEIGHT WITH 100% GLASS FIBER IS 35 TO 40 G/FT² MAXIMUM WEIGHT WITH 100% GLASS FIBER IS 300 G/FT² PRODUCT LOFT WITH 100% GLASS FIBER AT LOWEST WEIGHT AND FIBER LENGTH OF 3 INCH IS 45 TO 55 mm PRODUCT LOFT WITH 100% GLASS FIBER AT HIGHEST WEIGHT IS 250 mm PRODUCT WEIGHT ACCURACY IF OUR WEIGHT AND CONTROL SYSTEM IS IN USE WILL BE +/- 3% IN MACHINE & CROSS MACHINE DIRECTION FIBER DISTRIBUTION AND PRODUCT APPEARANCE AT LOWEST WEIGHT +/- 5% (WINDOWS AND CLOUDS) PHENOLIC RESIN CAPABILITIES: POWDER INTRODUCTION RATE INTO THE WEB FORMER IS MIN OF 10% AND A MAX OF 40% TRADITIONALLY THE AMOUNT OF BINDER RESIN IN USE IS BETWEEN 18 TO 22% IN RELATION TO THE FIBER WEIGHT POWDER DISTRIBUTION WITHIN THE PRODUCT AT AN ACCURACY OF +/- 3% PRODUCTION CAPACITIES PER HOUR WITH A MAXIMUM WORKING WIDTH OF 110 INCHES: WITH THE LOWEST PRODUCTION WEIGHT OF 35 TO 40 G/FT² 14 M/MIN AND 1,660 LB/HR WITH A PRODUCT WEIGHT OF 100 G/FT² 16 M/MIN OR 52 FT/MIN AND 4,000 LB/HR HIGHER PRODUCT WEIGHT (E.G.) 200 G/FT² 8 TO 9 M/MIN OR 26 TO 30 FT/MIN AT 4,000 LB/HR THESE PRODUCTION NUMBERS ARE CONSERVATIVE AND BASED ON ACTUAL TRIALS AND EXPERIENCE THE REAL PRODUCTION OUTPUT PER HOUR CAN BE INCREASED WHEN LOWER QUALITY EXPECTATIONS ARE ACCEPTED AND THE OPERATORS HAVE ACQUAINTED THEMSELVES WITH THE FEATURES OF THE EQUIPMENT QUANTITY: 1 Learn More

TT-8656 SIEMENS SGT5 4000 F GAS TURBINE & GENERATOR – NEW, 54 MW, YEAR 2016, 50/60 Hz 1. NEW AND UNUSED SIEMENS GAS TURBINE & GENERATOR 2. HEAVY DUTY, SINGLE CASING, AXIAL FLOW DESIGN AND DUAL FUEL GAS TURBINE. 3. MODEL: SGT54000F 4. BRAND: SIEMENS AG 5. 54 MW 6. YEAR OF MANUFACTURE: 2016 7. FREQUENCY: 50 Hz 8. FUEL: NATURAL GAS (NG) AND DIESEL OIL (DO) 9. GUARANTEED PERFORMANCE: 10. GROSS POWER OUTPUT [MW]: 298,2 (NG) – 301 (DO). 11. GROSS HEAT RATE [KJ/KWH]: 8979,3 (NG) – 9538,5 (DO). 12. GENERATOR: SGEN51200 A. 13. INCLUDES: BYPASS STACK AND DIVERTER DAMPER. 14. DELIVERY: IMMEDIATELY. BUYER IS RESPONSIBLE FOR LOADING, FREIGHT AND LOGISTICS FROM ACTUAL LOCATION TO FINAL DESTINATION. 15. DETAILED DESCRIPTION: GAS TURBINE (GT) 16. IT WORKS ON 50 Hz BUT COULD BE CONVERTED, WITH ADDITIONAL EQUIPMENT FOR 60 Hz (EXTRA COSTS). QUANTITY: 1 Learn More

YY-3575 SIEMENS SST-400 STEAM TURBINE, 30MW 50 TO 60Hz, 10500V, 2015, SURPLUS NEW 0 HOUR SIEMENS COMPLETE POWER GENERATION EQUIPMENT, INCLUDING STEAM TURBINE, MOTOR, REDUCER AND SPECIAL ELECTRIC CONTROL BOX, ALL OF WHICH ARE SIEMENS BRANDS. THE STEAM TURBINE MODEL IS SST-400 AND THE MOTOR MODEL IS SGEN5-100A-4P. THE EQUIPMENT WAS PURCHASED IN 2015. Learn More

V-2042 WATER RECIRCULATION SYSTEM FOR WATERJETS 6 LITERS PER MINUTE MAXIMUM JET HEAD USES 1 TO 2 LITERS PER MINUTE FILTRATION: FROM 5 TO 10 MICRONS Learn More

TT-1355 SPRAY DRYER, CAPACITY OF EVAPORATION 50L/H SPRAY DRYER CAPACITY OF EVAPORATION: 50L/H ELECTRICAL HEATING, 3 PHASE 380V 50Hz EQUIPMENT CHARACTERISTICS AND METHODS 1. ATOMIZATION METHOD: HIGH-SPEED CENTRIFUGAL ATOMIZATION. 2. FEEDING SYSTEM: FEEDING PUMP FEEDS. (FREQUENCY) 3. RECEIVING METHOD: COLLECT FROM THE BOTTOM OF THE TOWER TO THE NEXT POINT OF THE CYCLONE SEPARATOR. 4. HEATING METHOD: ELECTRIC HEATING. 5. TOTAL EQUIPMENT POWER: 72KW Learn More

T-9997 CEMENT AND MUD PLANTS ITEM 001 CEMENT PLANT FULLY FUNCTIONAL CEMENT PLANT READY TO BE REASSEMBLED ITEM 002 MUD PLANT FUNCTIONAL LIQUID MUD PLANT (LMP) 31,500BBL CAPACITY Learn More