Search results for: 'inst'

YY-2208 HUMAN CREMATION MACHINE, LIGHT DIESEL FUEL, GAS, NATURAL GAS, LIQUEFIED GAS DETAILS: 1. INCORPORATES EFFICIENT HEAT EXCHANGER AND SPECIAL AIR PATH STRUCTURE, MAKE FULL USE OF WASTE HEAT COMBUSTION FUEL GAS, IMPROVING HEAT UTILIZATION RATE, GOOD ENVIRONMENTAL PROTECTION INDEX, SAVES FUEL AND SHORTENS CREMATION TIME. 2. NEW REFRACTORY MATERIALS (EXCLUSIVE FORMULA) THAT ARE RESISTANT TO HIGH TEMPERATURE WITH LOW SPECIFIC HEAT. GREATLY EXTEND THE SERVICE LIFE. 3. SPECIAL CASTING MATERIAL, HIGH TEMPERATURE RESISTANCE, LONG SERVICE LIFE; SHORTENS THE COOLING CYCLE. THE BRICK STRUCTURE ON BOTH SIDES OF THE ASH PICKING FURNACE DOOR WILL NOT HAVE CRACKS CAUSED BY DESIGN OR QUALITY PROBLEMS GUARANTEED FOR ONE YEAR. REFRACTORY MATERIALS, THE FURNACE CONTACT ARE WITH FLAME HAS PHOSPHORIC ACID A CHARACTERISTIC COMBINATION BRICK WHICH CAN RESIST RAPID COOLING AND RAPID HEAT, AND THE ARCHED ROOF INCORPORATES HIGH ALUMINUM SINTERED MOLDING BRICK. THE FURNACE BODY IS SURROUNDED BY ALUMINUM SILICATE WOOL WITH GOOD HEAT INSULATION AND HEAT PRESERVATION PERFORMANCE. THE THICKNESS IS 180mm. 4. ALL OPERATING SYSTEMS OF THE EQUIPMENT HAVE THREE SETS OF OPERATION FUNCTIONS, NAMELY AUTOMATIC, SEMI-AUTOMATIC AND MANUAL, WHICH CAN BE SWITCH BETWEEN THEM WITHOUT INTERFERENCE. AUTOMATIC CONTROL, TELECOMMUNICATION OPERATION AND ANIMATION DISPLAY. KEEPING THE OPERATOR AWAY FROM THE CREMATION SITE AND PROTECTING THE OPERATOR. AT THE SAME TIME EQUIPPED WITH A STANDBY OPERATING SYSTEM. LOW NOISE MOTOR EQUIPMENT, THERMOCOUPLE RESISTANCE TO HIGH TEMPERATURE. ALL ELECTRICAL CABINETS OF THE EQUIPMENT ARE EXTERNAL. 5. THE OIL SUPPLY SYSTEM INCORPORATES AUTOMATIC CONTROL AND MANUAL CONTROL, AND INCORPORATES OIL PROTECTION TECHNOLOGY, WHICH CAN EFFECTIVELY PREVENT FUEL OIL FROM RUNNING, BUBBLING, LEAKING AND CAUSING FURNACE EXPLOSION ACCIDENTS INCLUDING ANTI-LEAKAGE TECHNOLOGY TO BETTER PROTECT THE PERSONAL SAFETY OF OPERATORS. 6. THE BLOWER, THE INDUCED DRAFT FAN, THE FURNACE DOOR MOTOR, THE BODY CART MOTOR, THE PREPARATORY DOOR MOTOR AND THE FLUE GATE MOTOR ARE ALL INSTALLED WITH AN INTEGRATED DEVICE FOR OVER-CURRENT AND SHORT-CIRCUIT PROTECTION. 7. SPECIAL DIESEL METERING DEVICE, ACCURATE METERING. QUANTITY: 1 Learn More

TT-1444 NRM 30:1, 6”, AIR COOLED, VENTED, 400 HP EXTRUDER QUANTITY: 1 Learn More

T-9989 TRUTZCHLER - TOYOTA - MURATA COMPLETE 37000 SPINDLE RING SPINNING PLANT, YEAR 2018 WITH THE TOP OF THE LINE UP TRUTZSCHLER BACK PROCESS, TOYOTA RING FRAME AND MURATEC QPRO LINK CORNER Learn More

YY-2183 OZONE AGING TEST CHAMBER, TEMPERATURE RANGE RT +10°C ~ 60°C DETAILS: IT IS WIDELY USED TO MEASURE QUALITY CONTROL; RUBBER & PLASTICS; AUTOMOBILE PRODUCTION; WIRES AND CABLES; PACKING MATERIALS; INSTRUMENTS AND MEASURING DEVICES; MEDICAL EQUIPMENT; CIVILIAN NUCLEAR ENERGY; CIVIL AVIATION; COLLEGES AND UNIVERSITIES; RESEARCH LABORATORIES; INSPECTION ARBITRATION, AND TECHNICAL SUPERVISION DEPARTMENTS AND OTHER PRODUCTS. CORRESPONDING STANDARDS: JIS K 6259, ASTM1149, ASTM1171, ISO1431, DIN53509, GB/T13642, GB/T 7762-2003, GB 2951. QUANTITY: 1 Learn More

TT-1335 S&S DRILLING RIG - NEVER USED, YEAR 2011 S&S DRILLING RIG DRILLING RIG (NEVER USED) YEAR 2011 HOURS: MINIMAL MILES: MINIMAL NEW SURPLUS UNIT - NEVER USED GENERAL RIG SPECIFICATIONS: HP RATING: 550HP AMBIENT RATING: 50-55⁰C POWERED BY: 1 X C15 CAT ENGINE (540 BHP @ 2,100 RPM) ALLISON 5610 TRANSMISSION RIG TYPE: SELF-PROPELLED, CARRIER MOUNTED, 6-AXLE (12X4), INTERNALLY GUYED QUANTITY: 1 Learn More

YY-2155 MATTRESS BORDER ZIPPER AUTOMATIC SEWING MACHINE, MAXIMUM SPEED 3000RPM FEATURES: 1. MAXIMUM SPEED: 3000RPM; 2. PRODUCTIVITY: 10 M/MIN; 3. ZIPPER WIDTH: 32mm (OTHERS SIZES CAN BE CUSTOMIZED); 4. FINISHED PRODUCTS WIDTH: ≤350mm (CUSTOMIZABLE); 5. ZIPPER RELATIVE POSITION CAN BE ADJUSTED ACCORDING TO THE PRODUCT TECHNICS; 6. SYNCHRONOUS CUTTER DESIGN, PNEUMATIC CONTROL CUTTER PRESSURE, EASY TO MAKE ADJUSTMENT; 7. MATTRESS BORDER LEFT-RIGHT LIMITS SET-GUIDE MECHANISM, APPLY FOR BORDER WIDTH AND LEFT RIGHT POSITION ADJUSTMENT; 8. AUTOMATIC THREAD BREAKAGE DETECT. 9. PRODUCTION OUTPUT COUNTING FUNCTION. 10. AUTOMATIC WINDING FUNCTION. 11. MATTRESS BORDER WIDTH: MAXIMUM 350mm, OTHER WIDTH CAN BE CUSTOMIZED; 12. WITH PNEUMATIC CUTTING KNIFE; 13. WITH THREAD BROKEN DETECTIVE FUNCTION; 14. WITH PRODUCTION COUNTING FUNCTION; 15. WITH AUTO RE-ROLLING FUNCTION; 16. STITCH TYPE: MULTI-NEEDLES DOUBLE THREAD CHAIN STITCH; 17. NEEDLE QUANTITY: 4 NEEDLES; 18. STITCH LINE DISTANCE: 1/4-1/2-1/4; 19. STITCH LENGTH: 5-6 STITCHES PER INCH; 20. MAX SEWING THICKNESS: 8mm; 21. POWER: SINGLE PHASE, 220V; 22. POWER CAPACITY: 2.2KW; 23. INSTALLATION SIZE: 4100X1100X1900mm. QUANTITY: 1 Learn More

TT-1277 STAUBLI LX1600B, YEAR 2001 QUANTITY: 1 Learn More

T-9717 COLD PIN PERFORATING UNITS, WORKING WIDTH 1800mm, REFURBISHED COLD PIN PERFORATING UNITS REFURBISHED WORKING WIDTH 1800mm YEAR: UNKNOWN, ESTIMATED TO BE LATE 1990’s WORKS WITH PLASTIC FILM, FOIL OR PAPER AND SOME NONWOVENS COLD PIN PERFORATING UNIT CAN BE USED FOR PERFORATING OR EMBOSSING EASY TEAR LINES FOR BAGS PRODUCT EMBOSSING FOR GRIP OR IDENTIFICATION WEB DRIVEN UNIT DIMENSIONS: 23” (585mm) WIDE X 36” (915mm) TALL X 105” (2667mm) LONG NO PINNED TOOLING IS INCLUDED WITH THE UNIT HOWEVER, A WIDE RANGE OF PINNED TOOLING CAN BE USED WITH THIS UNIT TO CREATE AN ARRAY OF HOLE SIZES AND PATTERNS. QUANTITY: 2 Learn More

YY-2157 TUBULAR HEAT SETTING MACHINE, WORKING WIDTH 1600mm (SINGLE), 1200 X 2 (DOUBLE) TECHNICAL SPECIFICATION: NAME: TUBULAR HEAT SETTING MACHINE SUITABLE FABRIC: TUBULAR CHEMICAL KNITTED FABRIC WORKING WIDTH: 1600mm (SINGLE), 1200 X 2 (DOUBLE) SUPPORTING PLATE: MANUALLY REGULATE WORKING SPEED: 3 TO 20 M/MIN CHAMBER WIDTH: 2400mm POWER SUPPLY: 380V 3P 50Hz WEIGHT OF MACHINE: ≈ 4⁓5T (SINGLE), 5⁓6T (DOUBLE) DRIVE INSTALLED CAPACITY: 13KW (SINGLE), 19.94KW (DOUBLE) HEAT-SETTING TYPE: HOT AIR CIRCULATING FABRIC BREADTH CONTROL: MANUALLY REGULATE DRIVING TYPE: INDEPENDENTLY DRIVE (SINGLE), DOUBLE DRIVING (DOUBLE) TEMPERATURE CONTROL TYPE: AUTO TEMPERATURE CONTROL COMPRESSED AIR: 0.35 TO 0.6 MPA DIMENSION: 6950mm X 3300mm X 3300mm (L X W X H) SINGLE; 6950mm X 4900mm X 3300mm (L X W X H) DOUBLE; MAIN COLOR: BLUE/CUSTOMIZE Learn More

J-4517 REBUILT/RUNNING CONDITION PELLETIZING LINE, STRAND TYPE, MODEL BCC38 EXTRUDER, 30:1 L/D RATIO Learn More