Search results for: '100% R'

TT-4290 PICANOL RAPIER LOOM OPTIMAX I-4-R-540, WORKING WIDTH 5400mm, YEAR 2015, DOBBY RAPIER LOOM BRAND: PICANOL TYPE OPTIMAX I-4-R-540 QUANTITY: 1 Learn More

TT-1389 LAB RING SPINNING FRAME KEY SPECIFICATION: CONTROL MODE: TOUCH SCREEN & PLC NUMBER OF SPINDLES: 6 APPLICABLE FIBER LENGTH: 22 TO 50mm DRAFT RANGE: 10 TO 50 DRAFT CONTROL: AUTOMATIC ROLLER DIAMETER: FRONT ROLLER: Φ25mm, MIDDLE ROLLER: Φ25mm BACK ROLLER: Φ25mm CENTER DISTANCE OF ROLLERS: FRONT AND MIDDLE: 43mm FRONT AND BACK: 143mm PRESSURE MODE: SPRING CRADLE TWIST SETTABLE RANGE: 200 TO 2,000 TWIST/M RING DIAMETER: RING NOT NEEDED IF THERE IS NO NEED FOR TWISTING FUNCTION. THIS MACHINE WILL USE A SHAFT TO MOVE THE YARN UP AND DOWN TO WIND ON THE PIRN TOTAL KW: 1.5 KW VOLTAGE: 220 VOLTS, 3-PHASE, 60 Hz WEIGHT: 650 KG DIMENSIONS: 1750 x 760 x 1950mm SPINDLE SPEED: 3800 RPM QUANTITY: 1 SET Learn More

TT-1201 PICANOL OPTIMAX RAPIER LOOMS - BRAND NEW, WORKING WIDTH 3800mm, YEAR 2020, CAM PICANOL OPTIMAX RAPIER LOOMS BRAND NEW WORKING WIDTH 3800mm PICANOL OPTIMAX OPTIMAX-I-4-P-380 RAPIER LOOMS NOT INSTALLED UP TO TODAY WITH 4 TUCK IN EACH LOOM YEAR: 2020 WORKING WIDTH: 3800mm 4 COLORS POSITIVE OUTSIDE CAM MOTION STAUBLI TYPE 1692 FRAME UP TO 8 HARNESSES QUANTITY: 15 SETS Learn More

TT-1087 HERGETH/RAMISCH/EDELMANN THERMOBOND LINE, WIDTH 4000mm, YEAR 1990 TO 1995 HERGETH/RAMISCH/EDELMANN THERMOBOND LINE TYPE: COMPLETE THERMOBONDING LINE WIDTH: 4000mm YEAR: 1990 TO 1995 QUANTITY: 1 Learn More

YY-2095 POLYURETHANE FOAM CUTTING MACHINE POWER: 13KW WEIGHT: 1000 KG QUANTITY: 1 Learn More

T-8542 3 SIDE SEALING WET WIPES MACHINE, STABLE SPEED 35 TO 200 PACKS PER MINUTE 3 SIDE SEALING WET WIPES MACHINE DRIVE MODE: AUTOMATIC STABLE SPEED: 35 TO 200 PACKS PER MINUTE MACHINE SIZE (L X W X H): 2500mm X 1000mm X 1500mm QUANTITY: 1 Learn More

T-8028 HIGH SPEED SOFT WINDING MACHINE SIZE: 2050 X 750 X 1500mm SINGLE-SIDE CONFIGURATION: 6 SPINDLES/SET WEIGHT: 150KG QUANTITY: 1 SET (6 SPINDLES) Learn More

AA-1159 FOUR NOZZLES PILLOW FILLING PRODUCTION LINE FOUR NOZZLES PILLOW FILLING MACHINE: IT IS SUITABLE FOR OPENING AND PROCESSING FIBER RAW MATERIAL, FILLING PILLOW CORE AND CUSHION. CHARACTERISTICS: LESS INVESTMENT, HIGH EFFICIENCY, SIMPLE OPERATION, WITH FREQUENCY CONVERSION DEVICE. RAW MATERIAL REQUIREMENTS: FIBERS ABOVE 0.78D, CAN BE OPENED AT ONE TIME. Learn More

REFERENCE NUMBER: AJ-2089 USED 1500 TPD SUGAR REFINERY FROM RAW SUGAR THE PROCESS CONSIST OF: RAW SUGAR RECEPTION WITH 2 WAREHOUSES FOR STORAGE OF APPROX 14000 TON OF RAW SUGAR AFFINATION (FCB CONTI CENTRIFUGES) CARBONATION FILTRATION WITH DIASTAR AND PUTSCH FILTERS ION EXCHANGE 3 COLUMNS DECOLORIZATION WITH APPLEXION MEMBRANE FILTRATION EVAPORATION WITH 4 FALLING FILM EVAPORATORS JUICE AND SYRUP HEATING CRYSTALLIZATION WITH 9 VACUUM PANS AND VERTICAL CRYSTALLIZERS CURING (SUGAR CRYSTALS SEPARATION) WITH 6 FCB BATCH SUGAR CENTRIFUGES SCREENING AND DRYING SUGAR WITH 55 RPH MAGUIN REVOLVER TYPE SUGAR DRYER AND ADDITIONAL 12 TPH FLUID BED SUGAR DRYER PACKING AND PALLETIZING SUGAR 5 GRAM STICKS, 1 KG, 20 TO 50 KG, 1000 KG BAGS 50000 TON SUGAR SILO POWER PLANT WITH 120 TPH OF STEAM AND 11 MW ABB OR CKD TURBO GENERATOR WATER TREATMENT PLANT REPORTED THE PLANT WAS RUNNING UP TO 1600 TPD CAPACITY MAY BE INCREASED TO 2000 TPD WITH ADDITIONAL EQUIPMENT QUANTITY: 1 Learn More

REFERENCE NUMBER: J-2326
QUILTER FOR RAGS, 12 INCH WIDTH – NEW – RAG QUILTER

QUILTING MACHINE FOR RAGS
SEWS RAGS CONTINUOUSLY
SEW HEAD: 7 NEEDLES AND 7 LOOPERS 
MAKES A CHAIN STITCH ON THE CONVEYED RAGS
USES OVERLOCK THREAD
DISTANCE BETWEEN NEEDLES: 250mm (ENSURES THAT EVEN SMALL RAGS ARE SEWN)
1 HP MOTOR, 3-PHASE, 220 VOLT
WITH FREQUENCY INVERTER TO ADJUST THE ROTATION SPEED OF THE MOTOR AS NEEDED
HEIGHT: 1800mm
WIDTH: 960mm
DEPTH; 370mm
CONVEYOR WIDTH: 200mm
CONVEYOR LENGTH: 1560mm
MACHINE TOTAL LENGTH WITH CONVEYOR: 2800mm

AFTER SEWING, THE QUILT IS TRANSPORTED OUT INTO ROLLS WHICH CAN BE CUT ACCORDING TO CUSTOMER NEEDS
OPERATION: PLACE A LARGER RAG AS THE BOTTOM LAYER, SMALLER RAGS AS FILLING, AND ANOTHER LARGER RAG AS THE TOP LAYER. OPERATION REQUIRES 2 TO 3 OPERATORS.
TO REDUCE THE NUMBER OF OPERATORS REQUIRED, A FIBER ROLL AS CAN BE USED AS THE LOWER LAYER. THIS ALSO INCREASES THE PRODUCTION RATE.
DAILY PRODUCTION: VARIES BETWEEN 300 TO 500 KG PER 8 HOURS OF OPERATION
FOR KNIT FABRICS SUCH AS COTTON, VISCOSE, SWEATSHIRT FLEECE, NYLON STRETCH-FABRIC, PIQUET AND POPELINE
THERE IS NO MATERIAL WASTE AS THE MACHINE USES 100% OF THE RAGS
WORKING WIDTH: 12 INCHES
NEEDLE SPACING: 1 INCH
WITH LOOPER STRUCTURE SIMILAR TO THE DIAGRAM BELOW (REDUCES BOTTOM THREAD BREAKAGE)
MACHINE IS NEW, MADE TO ORDER
LEAD TIME: 10 DAYS

Learn More