Search results for: 'Mattress ta'

REFERENCE NUMBER: M-2042 (770IDFGXX6) WISCONSIN OVEN GAS FIRED BATCH OVEN FOR TEMPERING MATTRESS INNERSPRINGS GAS FIRED BATCH OVEN MANUFACTURER: WISCONSIN OVEN STILL ASSEMBLED TODAY OVEN WILL BE USED FOR TEMPERING STEEL SPRING ASSEMBLIES WITH A LOADING OF APPROXIMATELY 50 ASSEMBLIES WEIGHING APPROXIMATELY 40 POUNDS, IN THE OVEN AT A TIME THE SIZE IS BASED ON APPROXIMATELY 4 TO 5 CYCLES PER HOUR PROVIDING THE LOADING AND UNLOADING IS ACCOMPLISHED PROMPTLY THE HEATING RATE IS BASED ON A HEATING CYCLE OF APPROXIMATELY 12 MINUTES PER CYCLE THE OVEN WILL INCLUDE, BUT NOT BE LIMITED TO, THE DEISNG FEATURES OUTLINED IN OUR SPECIFICATIONS LISTED BELOW FURTHER MODIFICATIONS AND DESIGN CHANGES MAY BE INCORPORATED AT THE FINAL ENGINEERING STAGES TO PRODUCE THE BEST EQUIPMENT POSSIBLE QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-1291 INNOVATIVE SEWING TECHNOLOGY FOR HIGH QUALITY CUSHIONS SPECIFIC FOR PRODUCING CUSHIONS OF SOFAS AND ARMCHAIRS, IN FOAM PARTIALLY OR TOTALLY COVERED WITH DACRON, EVEN WITH MECHANICAL PARTS, BABY MATTRESS, BEDSOFAS, CARAVAN BEDS WORKS WITH MANY KINDS OF MATERIALS: FOAM, DACRON (FOR FOAM THICKNESS: UP TO 20mm. ALSO HIGH DENSITY; FOR DACRON: UP TO 1000 GRAMS DENSITY), SYNTHETIC FIBER, COTTON, NON WOVEN, FEATHER, FIBRES, RECYCLED FIBRES AND FIBERBALLS. THE RESISTANT AND ELASTIC SEAM ALLOWS THE ELIMINATION OF THE USE OF GLUE, MAXIMIZING THE QUALITY OF THE PRODUCT AND GIVING ADDED VALUE TO THEIR PRODUCTION FACILITATES THE UPHOLSTERER OPERATIONS DURING THE SOFA CONSTRUCTION, GIVING ADVANTAGES THROUGHOUT ALL THE PRODUCTION PHASES QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-8444 PUNCHING MACHINE MODEL FST 11 MACHINE AVAILABLE FOR AUTOMATIC DRILLING IN SHEETS OF PU FOAM, MEMORY FOAM, LATEX, EVA, NEOPRENE. WITH 20mm THICKNESS UP 2 DRILLINGS PER SECOND ARE PERFORMED; E.G.: ONE MOULD FOR 2mm DIAM. HOLES AND 50mm WHEEL BASE OF PUNCH, 7mm X 3.5 CROSSED HOLE PITCH: THE MACHINE WILL PERFORM NO 2310 HOLES EACH DRILLING CYCLE WITH 4620 HOLES PER SECOND IN TOTAL. THAT MEANS THE MACHINE CAN DRILL A FOAM SHEET DIM. 1000X1100mm EACH 20 SECONDS WITH 92400 HOLES IN TOTAL. TWO DRILLING TYPES ARE POSSIBLE: CONTINUOUS DRILLING “A-PERFORM” (NO DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS –SEE TAB. 31A); CONTINUOUS DRILLING “B-PERFORM” (WITH FIXED DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS). THE DISTANCE CAN BE MODIFIED BY OPERATOR). UP TO 150 20mm-THICKNESS MATTRESSES CAN BE PRODUCED IN ONE HOUR; BY INCREASING THE THICKNESS THE PRODUCTION WILL REDUCE. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-8444-A PUNCHING MACHINE MODEL FST 11 FOR LATEX MACHINE AVAILABLE FOR AUTOMATIC DRILLING IN SHEETS OF PU FOAM, MEMORY FOAM, LATEX, EVA, NEOPRENE. WITH 20mm THICKNESS UP 2 DRILLINGS PER SECOND ARE PERFORMED; E.G.: ONE MOULD FOR 2mm DIAM. HOLES AND 50mm WHEEL BASE OF PUNCH, 7mm X 3.5 CROSSED HOLE PITCH: THE MACHINE WILL PERFORM NO 2310 HOLES EACH DRILLING CYCLE WITH 4620 HOLES PER SECOND IN TOTAL. THAT MEANS THE MACHINE CAN DRILL A FOAM SHEET DIM. 1000X1100mm EACH 20 SECONDS WITH 92400 HOLES IN TOTAL. TWO DRILLING TYPES ARE POSSIBLE: CONTINUOUS DRILLING “A-PERFORM” (NO DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS –SEE TAB. 31A); CONTINUOUS DRILLING “B-PERFORM” (WITH FIXED DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS). THE DISTANCE CAN BE MODIFIED BY OPERATOR). UP TO 150 20mm-THICKNESS MATTRESSES CAN BE PRODUCED IN ONE HOUR; BY INCREASING THE THICKNESS THE PRODUCTION WILL REDUCE. QUANTITY AVAILABLE: 1 Learn More

INVENTORY NUMBER: E-8929 SPLITTER MODEL: 1650 64" WIDTH MATERIAL (1650mm) QUANTITY AVAILABLE: 1 Learn More

E-2896 CONVOLUTER

MODEL: 2150
CONVOLUTING WIDTH MAX: W 2150 mm (84")
CONVOLUTING PIN DEPTH: 30 mm (1.18")
CONVOLUTING RUNNING SPEED: 0 TO 25 RPM
TOTAL POWER: 10.74 KW
CUTTING SPEED: 0 TO 25 METERS PER MINUTE
CUTTER BLADE TOTAL LENGTH: 9800 mm
BLADE WIDTH x THICKNESS: 50mm x 0.65mm
MACHINE WEIGHT: 2500 KG
MACHINE OVERALL DIMENSIONS: 15.4 FEET WIDE X 4.1 FEET DEEP X 5 FEET TALL
MAXIMUM HEIGHT OF FOAM: 200mm (8”)
THE HEADS ARE ROUND HEADS:
-THE DIAMETER OF EACH HEAD IS 16mm
-THE HEIGHT IS 30mm
-THE DISTANCE OF THE CENTER TO CENTER OF A PAIR HEADS IS 50mm.

THIS MACHINE IS A COMBINATION CONVOLUTER-CUTTING MACHINE.
PRODUCES APPROPRIATE MATERIAL PACKAGING FOR ELECTRONICS, DELICATE INSTRUMENTS, FOR CAR SEATING AND MATTRESS INDUSTRY, AS WELL AS EXPENSIVE ARTICLE PACKAGING AND HIGH DENSITY FOAM.

Learn More

JAMES CASH KING SIZE TAPE EDGE STAINLESS STEEL TABLE (dimensions 78”x80”)(1981 x 2032mm) UNDER CURRENT (ELECTRICITY FED FROM UNDERNEATH) To be fully rebuilt Can put up to 22 inch high mattress Learn More