Search results for: 'pres'

REFERENCE NUMBER: L-1502
MODEL: UE2410
QUANTITY: 1

Learn More

REFERENCE NUMBER: L-5080

HORIZONTAL SPLITTING MACHINES WITH EXTRA BLADES, GRINDING WHEELS, AND MOTORS

 

 

QUANTITY: 2

Learn More

M-6498 FOAM SKIVING MACHINE FOR PRODUCTION OF INDENTED FOAM SURFACES

MACHINE IS SUPPLIED WITH ONE PATTERN , UNLIMITED NUMBER OF PATTERNS CAN BE MADE

MAXIMUM WIDTH 1900mm = 76 INCHES X 2100mm LONG = 82.6 INCHES

MAXIMUM HEIGHT OF CUT 250mm = 9.8 INCHES
TABLE LENGTH 2200mm = 86.6 INCHES
TLBLE SPEED 5 TO 25 METERS PER MINUTE
INSTALLED POWER 15 KW
AMPERAGE = 30 APMS
MACHINE WEIGHT 4876 KGS – 10,727 LBS
AIR PRESSURE NEEDED ; 6 BAR – 90 PSI
CUTTING IS DONE BY 80mm WIDE BLADE
DESIGNS ARE MADE ON MDF WOOD BY A CNC ROUTER MACHINE (NOT INCLUDED)

QUANTITY: 1

Learn More

REFERENCE NUMBER: V-1065 AUTOMATIC CUTTING MACHINE (NEW) HEAVY DUTY HORIZONTAL CUTTING MACHINE FOR 14 LB (225 KG/CUBIC METER) FOAM MODEL SRM-P-1200 1067mm WIDE (42 INCHES) 2032mm LONG (80 INCHES) 560mm TALL (22 INCHES) THE MATERIAL IS 225 KGS PER CUBIC METER DENSITY (14 LBS/CUBIC FOOT) QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4085

CUTLAS HORIZONTAL & VERTICAL CNC CUTTER YEAR 2012 -OSCILLATING BLADES

 

CUTLAS CNC CUTTER

TYPE: CNC HK-5

HORIZONTAL & VERTICAL

MOTOR: 1 KW

WEIGHT: 3T

VOLTAGE: 10~1 W 50 HZ 380

AIR PRESSURE: 4-6

MFD: NANTONG HEALTH CARE MACHINE CO. LTD.

THIS MACHINE WORKED ABOUT 20 HOURS

Nesting software is in development

Uses Autocad 2002

 

THE BUN THAT CAN FIT ON THE MACHINE HAS THE MAXIMUM DIMENSIONS:

 

HEIGHT: 50" INCHES

WIDTH:  88" INCHES

LENGTH: 108" INCHES

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-5032 (1212126KTY11R) L FORM PROFILE CUTTING MACHINE WIDTH 1900mm MAXIMUM CUTTING HEIGHT: 250mm TABLE WIDTH: 1980mm TABLE LENGTH: 2200mm MAXIMUM MATTRESS DIMENSION: 2100mm X 1900mm FLOOR SPACE: 5185 X 6010 X H 2200 TABLE SPEED: 5 TO 25 M/MIN POWER: 15 KW CURRENT: 30A MASS: 4876 KG PRESSURE: 6 BAR QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-5243 (YOU MUST LOOK AT THE VIDEO, IT’S AMAZING) AUTOMATIC TRIMMING MACHINE FOR FOAM BLOCKS OR FOAM MATTRESSES, FOUR SIDES DESCRIPTION: PU SLABS CUT FROM FOAM BLOCK BY HORIZONTAL CUTTING UNDERGO PERIMETRICAL STRETCHING, (SOMETIMES A FEW CENTIMETERS STRETCHING). IN ORDER TO ACHIEVE SATISFACTORY SIZES (±1MM EACH SIDE) THE REMOVING OF IRREGULAR EDGES IS REQUIRED. THIS MACHINE TRIMS FOAM SLABS AND ALSO COUPLED SLABS. IT CAN BE PLACED AT THE END OF THE MATTRESS GLUING PLANT (MANUAL OR AUTOMATIC) OR BEYOND THE HORIZONTAL CUTTING MACHINE. THE COUPLED FOAM SHEETS ARE NOT ALIGNED AND NEED TO BE TRIMMED. OFTEN THE COUPLED MATTRESSES ARE TRIMMED ONE BY ONE ALONG THE FOUR SIDES WITH A MANUAL VERTICAL CUTTING MACHINE WASTING A LARGE AMOUNT OF TIME. THIS MACHINE AUTOMATICALLY TRIMS THE FOUR SIDES OF FOAM MATTRESSES WITHOUT ANY HANDLING; THAT MEANS AN ACCURATE TRIM AND SHORT PROCESSING TIME. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-2246 FOAM DRILLING MACHINE-FOR FOAM MATTRESS 2200 X 2200 X 1800mm MODEL F26 LOADING CONVEYOR 2100 X 2100mm UNLOADING CONVEYOR 2100 X 2100mm MAX. DRILLING WIDTH 2100mm MAXIJMUM LENGTH 2100mm MAX. DRILLING HEIGHT 180mm HOLE DIAMETER 6-30mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-8444 PUNCHING MACHINE MODEL FST 11 MACHINE AVAILABLE FOR AUTOMATIC DRILLING IN SHEETS OF PU FOAM, MEMORY FOAM, LATEX, EVA, NEOPRENE. WITH 20mm THICKNESS UP 2 DRILLINGS PER SECOND ARE PERFORMED; E.G.: ONE MOULD FOR 2mm DIAM. HOLES AND 50mm WHEEL BASE OF PUNCH, 7mm X 3.5 CROSSED HOLE PITCH: THE MACHINE WILL PERFORM NO 2310 HOLES EACH DRILLING CYCLE WITH 4620 HOLES PER SECOND IN TOTAL. THAT MEANS THE MACHINE CAN DRILL A FOAM SHEET DIM. 1000X1100mm EACH 20 SECONDS WITH 92400 HOLES IN TOTAL. TWO DRILLING TYPES ARE POSSIBLE: CONTINUOUS DRILLING “A-PERFORM” (NO DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS –SEE TAB. 31A); CONTINUOUS DRILLING “B-PERFORM” (WITH FIXED DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS). THE DISTANCE CAN BE MODIFIED BY OPERATOR). UP TO 150 20mm-THICKNESS MATTRESSES CAN BE PRODUCED IN ONE HOUR; BY INCREASING THE THICKNESS THE PRODUCTION WILL REDUCE. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-8444-A PUNCHING MACHINE MODEL FST 11 FOR LATEX MACHINE AVAILABLE FOR AUTOMATIC DRILLING IN SHEETS OF PU FOAM, MEMORY FOAM, LATEX, EVA, NEOPRENE. WITH 20mm THICKNESS UP 2 DRILLINGS PER SECOND ARE PERFORMED; E.G.: ONE MOULD FOR 2mm DIAM. HOLES AND 50mm WHEEL BASE OF PUNCH, 7mm X 3.5 CROSSED HOLE PITCH: THE MACHINE WILL PERFORM NO 2310 HOLES EACH DRILLING CYCLE WITH 4620 HOLES PER SECOND IN TOTAL. THAT MEANS THE MACHINE CAN DRILL A FOAM SHEET DIM. 1000X1100mm EACH 20 SECONDS WITH 92400 HOLES IN TOTAL. TWO DRILLING TYPES ARE POSSIBLE: CONTINUOUS DRILLING “A-PERFORM” (NO DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS –SEE TAB. 31A); CONTINUOUS DRILLING “B-PERFORM” (WITH FIXED DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS). THE DISTANCE CAN BE MODIFIED BY OPERATOR). UP TO 150 20mm-THICKNESS MATTRESSES CAN BE PRODUCED IN ONE HOUR; BY INCREASING THE THICKNESS THE PRODUCTION WILL REDUCE. QUANTITY AVAILABLE: 1 Learn More