Search results for: 'process eq'

TT-1175 HENNECKE BFM COMPACT FOAMING LINE, 80 BUNS PER 8 HOUR SHIFT INCLUDES 3 MOLDS, DIMENSIONS 2100 x 2100 x 1400mm A COMPLETE LINE FOR DISCONTINUOUS PRODUCTION OF SLABSTOCK FOAM. THE BFM IS STATE-OF-THE-ART EQUIPMENT FOR PRODUCING FOAM WITH QUICK START UP, MINIMUM SPACE REQUIRED AND FLEXIBLE PRODUCTION. WITH THIS LINE POLYURETHANE FOAMS BLOCKS CAN BE PRODUCED, SUCH AS FOAMS FOR UPHOLSTERED FURNITURES, CUSHIONS, MATTRESSES, SEATS, SOFAS AND PACKAGING. WITH THIS MACHINE EVEN HIGH RESILIENCE HR, HYPER SOFT HS AND VISCO ELASTIC FOAMS CAN BE PRODUCED. BENEFITS WITH BFM COMPACT - A BROAD RANGE OF FOAM DENSITY 20 TO 50 KG/m3 - MANUFACTURE DIFFERENT TYPES OF POLYETHER BASED FOAMS - POSSIBLITY TO CONTROL MIXER SPEED => HIGH INFLUENCE ON CELL STRUCTURE - HIGH REPRODUCIBILITY, THANKS TO FORMULATIONS AND MODERN CONTROL SYSTEM - SIEMENS CONTROL PANEL - COMPACT DESIGN => SMALL SPACE REQUIREMENTS - AUTOMATIC FLUSHING WITH POLYOL AVOIDS THE COSTS OF DISPOSAL OF MIXTURE TECHNICAL DETAILS DIMENSIONS OF THE MACHINE WITHOUT MOULD: LENGHT APPROX: 5000mm WIDTH APPROX: 2350mm HEIGHT APPROX: 2550mm CAPACITY: DEPENDING ON QUANTITY AND SIZE OF THE MOULDS – ABOUT 80 RECTANGUAL BLOCKS PER 8-HOUR-SHIFT. AMOUNT OF MOULDS: 3 Learn More

T-9752 KARL MAYER CARBON MACHINES BIAXIAL AND MULTIAXIAL PROPERTIES: SINCE ALL FIBERS POINT IN ONE DIRECTION, THE SCRIM CAN BE IDEALLY DRAPED GOOD SOAKABILITY WITH LITTLE RESIN CONSUMPTION CAN BE DRAPED VERY WELL AROUND CURVES AND EDGES EASY TO CUT ELECTRICALLY CONDUCTIVE, INFUSIBLE HIGH STRENGTH AND RIGIDITY DUE TO GRAPHITE-LIKE FIBER STRUCTURE BIOCOMPATIBLE TRANSPARENT TO X-RAYS LOW SPECIFIC WEIGHT IDEAL FOR SURFACE USE (LITTLE FIBER IMPRINTS) IDEAL FOR PROCESSING WITH EPOXY RESIN! TEXTILE SEMI-FINISHED PRODUCTS MADE OF PRE-SPREAD AND PLANE-PARALLEL LAID FIBERS FORM THE GROUP OF UNIDIRECTIONAL FABRICS. THE FIBERS ARE USUALLY LAID AT 0°, MORE RARELY AT 90°. BY LAYING THE UD FABRICS ALONG THE LINES OF FORCE ACTING IN THE COMPONENT, THE LIGHTWEIGHT POTENTIAL OF THE CARBON FIBER IS OPTIMALLY EXPLOITED. UD FABRICS CONSIST OF ONE OR MORE SUPERIMPOSED FIBER LAYERS FIXED WITH AN EPOXY-COMPATIBLE BINDER THREAD. THE SPECIAL SPREADING TECHNIQUE PRODUCES FABRICS WITH HIGH FIBER PARALLELISM, WITHOUT KNOTS AND FIBER TWIST. SPREAD FIBERS ABSORB THE RESIN BETTER, RESULTING IN HIGHEST LAMINATE STRENGTHS. QUANTITY: 3 LINES Learn More

T-8543 4 SIDE SEALING WET WIPES MACHINE, STABLE SPEED 60 TO 120 BAGS PER MINUTE 4 SIDE SEALING WET WIPES MACHINE DRIVE MODE: AUTOMATIC STABLE SPEED: 60 TO 120 BAGS PER MINUTE MACHINE SIZE (L X W X H): 3000mm × 2500mm × 1800mm QUANTITY: 1 Learn More

YY-1347 PSA OXYGEN GENERATION SYSTEM SCHEME, CAPACITY 50 m3 PER HOUR PURITY: ≥ 93%, FLOW RATE: 50M3 PER H, (PRESSURE: 200 BAR AUTOMATIC FILLING SYSTEM) Learn More

YY-1348 PSA OXYGEN GENERATION SYSTEM SCHEME, FLOW RATE 100 M3 PER HOUR DETAILS: PURITY: ≥ 93%, FLOW RATE: 100 M3 / H, (PRESSURE: 200 BAR AUTOMATIC FILLING SYSTEM) QUANTITY: 1 Learn More

REFERENCE NUMBER: K-2246 FOAM DRILLING MACHINE-FOR FOAM MATTRESS 2200 X 2200 X 1800mm MODEL F26 LOADING CONVEYOR 2100 X 2100mm UNLOADING CONVEYOR 2100 X 2100mm MAX. DRILLING WIDTH 2100mm MAXIJMUM LENGTH 2100mm MAX. DRILLING HEIGHT 180mm HOLE DIAMETER 6-30mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5010 (12123GHBLSD11UN) L COMPLETE GLASS FIBER PROCESSING LINE FIBER PREPARATION & WEB FORMING EQUIPMENT CURING OVEN WITH ALL AUXILIARY EQUIPMENT, CROSS CUTTER, STACKER, AND WINDER RECUPERATIVE THERMAL OXIDIZER (RTO) TO TREAT OVEN EXHAUST DUST FILTRATION SYSTEM WITH RECYCLING OF FIBER AND RESIN PHENOLIC POWDER RESIN SUPPLY SYSTEM COMPLETE ELECTRIC CONTROL SYSTEM (SIEMENS S 7) FIBER BLEND CAPABILITIES: GLASS FIBER E GLASS UP TO STAPLE LENGTH OF 3 1/4 INCH 100% GLASS FIBER BLENDS WITH ANY MAN MADE FIBERS SUCH AS PET-PA OR RAYON GLASS FIBER BLENDS WITH ANY OF THE ABOVE PLUS ORGANIC FIBERS SUCH AS CELLULOSE, WOOD, NEWSPAPER, COTTON, AND ALL NATURAL FIBERS BI-CO FIBERS USED AS BINDER FIBER WITH A STAPLE LENGTH OF 2 INCHES AND A DTEX RANGE FROM 3 TO 10 MINIMUM BLEND RATIO IS 8% FOR EACH FIBER COMPONENT BLEND ACCURACY WITH THE USE OF OUR CONTROLS AND WEIGHING SYSTEM AS OFFERED +/- 2% WEB FORMING CAPABILITES: MINIMUM WEIGHT WITH 100% GLASS FIBER IS 35 TO 40 G/FT² MAXIMUM WEIGHT WITH 100% GLASS FIBER IS 300 G/FT² PRODUCT LOFT WITH 100% GLASS FIBER AT LOWEST WEIGHT AND FIBER LENGTH OF 3 INCH IS 45 TO 55 mm PRODUCT LOFT WITH 100% GLASS FIBER AT HIGHEST WEIGHT IS 250 mm PRODUCT WEIGHT ACCURACY IF OUR WEIGHT AND CONTROL SYSTEM IS IN USE WILL BE +/- 3% IN MACHINE & CROSS MACHINE DIRECTION FIBER DISTRIBUTION AND PRODUCT APPEARANCE AT LOWEST WEIGHT +/- 5% (WINDOWS AND CLOUDS) PHENOLIC RESIN CAPABILITIES: POWDER INTRODUCTION RATE INTO THE WEB FORMER IS MIN OF 10% AND A MAX OF 40% TRADITIONALLY THE AMOUNT OF BINDER RESIN IN USE IS BETWEEN 18 TO 22% IN RELATION TO THE FIBER WEIGHT POWDER DISTRIBUTION WITHIN THE PRODUCT AT AN ACCURACY OF +/- 3% PRODUCTION CAPACITIES PER HOUR WITH A MAXIMUM WORKING WIDTH OF 110 INCHES: WITH THE LOWEST PRODUCTION WEIGHT OF 35 TO 40 G/FT² 14 M/MIN AND 1,660 LB/HR WITH A PRODUCT WEIGHT OF 100 G/FT² 16 M/MIN OR 52 FT/MIN AND 4,000 LB/HR HIGHER PRODUCT WEIGHT (E.G.) 200 G/FT² 8 TO 9 M/MIN OR 26 TO 30 FT/MIN AT 4,000 LB/HR THESE PRODUCTION NUMBERS ARE CONSERVATIVE AND BASED ON ACTUAL TRIALS AND EXPERIENCE THE REAL PRODUCTION OUTPUT PER HOUR CAN BE INCREASED WHEN LOWER QUALITY EXPECTATIONS ARE ACCEPTED AND THE OPERATORS HAVE ACQUAINTED THEMSELVES WITH THE FEATURES OF THE EQUIPMENT QUANTITY: 1 Learn More

TT-8178 TETRA PAK FILLING MACHINE A3 FLEX 7500 BPH, YEAR 2016 1. BRAND: TETRA PAK® 2. MODEL: A3FLEX 3. YEAR: 2016 4. SPEED: 7500 BPH 5. PRODUCTS: DAIRY, JUICE 6. CONTAINERS: BRIK Learn More

TT-8186 ATLAS COPCO BOTTLING LINE IN PET FOR STILL WATER UP TO 30000 BPH 1. BRAND: ATLAS COPCO 2. SPEED: 30000 BPH 3. PRODUCTS: WATER (STILL) 4. CONTAINERS: PET 5. FORMATS: 0.33 L, 0.50 L, 0.75 L, 1.0 L, 1.5 L 6. AFETY FEATURES: YES 7. MANUALS: YES 8. FILL TYPE: GRAVITY/LIGHT DEPRESSION 9. NECK TYPE: 29,25 Learn More

TT-6648 NATURAL GAS COGENERATION PLANT, 40 MEGAWATTS Learn More