Search results for: 'Stable'

REFERENCE NUMBER: J-4363 AUTOMATIC PET PAD MAKING MACHINE, 200 PADS PER MINUTE FOR PRODUCTS 450 TO 1500mm, COTTON CORE BETWEEN 400 TO 1000mm TOUCH SCREEN WITH ADJUSTABLE PRODUCT REQUIREMENTS IN 450 TO 600mm, COTTON CORE IN 400 TO 550mm PRODUCT STRUCTURE: SURFACE LAYER, BACKING PAPER, COTTON CORE, SAP, BASEMENT MEMBRANE STABLE PRODUCTION SPEED: 120 METERS PER MINUTE IF THE SIZE OF THE FINISHED PRODUCT IS 600 x 600mm, THE MACHINE RUNNING SPEED IS 200 PIECES PER MINUTE (8 HOUR OUTPUT IS 96,000 PIECES) MACHINE DIMENSIONS: 16000 x 2200 x 2600mm (LENGTH x WIDTH x HEIGHT) POWER SUPPLY: 380 VOLTS, 50 Hz TOTAL POWER: ABOUT 80 KW (NOT INCLUDING GLUE) PRESSURE: 1100 LITERS PER MINUTE, 6 TO 8 BARS YIELD: 98% OR GREATER (EXCLUDING ERRORS DUE TO GLUE MACHINE, MATERIAL EXCHANGE AND JOINTS CAUSED BY DEFECTIVE GOODS) QUANTITY: 1 Learn More

AA-1180 CENTRIFUGAL EXTRACTOR – 1200mm/1500mm DIAMETER CENTRIFUGAL EXTRACTOR – 1200mm DIAMETER SPECIFICATIONS: 1. CAPACITY: 250 KG/H 2. MOTOR POWER: 7.5KW 3. ROTATION SPEED: 810 R/MIN 4. SIZE: OUTSIDE ø1920 x 935mm; TANK INSIDE ø1200 x 450mm 5. VOLTAGE:220V,60Hz,3 PHASE 6. THE INNER BARREL IS MADE OF FLAT BOTTOM, WITH A BASKET 7. TANK MATERIAL OF INNER AND OUTER IS MADE OF 304 STAINLESS STEEL 8. BASE: MADE OF THREE-LEGGED CAST IRON 9. STABLE PERFORMANCE: SHOCK ABSORBER DESIGN BOTTOM 10. THE CENTRIFUGAL DEHYDRATOR IS A KIND OF EQUIPMENT THAT USES CENTRIFUGAL METHODS SUCH AS INNER CYLINDER ROTATION TO SPIN OUT THE WATER CONTAINED IN THE OBJECT THROUGH THE HIGH-SPEED ROTATION 11. IT HAS A TOP LID 12. PACKAGE: PLYWOOD CASE Learn More

TT-3269 MTU CONTAINERISED GENERATORS, 1635KW, YEAR 2019, 50 Hz, 400 VOLTS MTU CONTAINERISED GENERATORS MODEL MTU 16V4000G23 PPU FUEL DIESEL 1500 RPM 50 Hz YEAR 2019 SURPLUS NEVER USED VOLTAGE 400V POWER OUTPUT 1635KW ALTERNATOR LEROY STAMFORD QUANTITY: 20 UNITS Learn More

TT-3290 MASTER BAG 400 PRINTING MACHINE, 2 COLORS, YEAR 2023 CATEGORY BAG MAKING MODEL PAPER BAG YEAR 2023 AVAILABILITY IMMEDIATELY QUANTITY: 1 Learn More

T-9483 FULLY AUTOMATIC FOUR EDGE-SEALING GAUZE PACKING MACHINE TECHNICAL PARAMETERS: BAG SIZE: BASED ON CUSTOMER'S REQUEST SPEED: 120~180 BAGS/MIN PACKING MATERIAL: PAPER+PAPER, PAPER+PLASTIC IT CAN HOT SEALING PACKING MATERIAL, PACKAGE MATERIAL DIAMETER Φ ≤ 350mm, WIDTH IS BASED ON CUSTOMER'S REQUEST; VOLTAGE: 3P 380V 50Hz SERVO MOTOR 1.5 KW+SERVO MOTOR: 1 KW+STEPPING MOTOR 110 + STEPPING MOTOR 130 + VARIABLE FREQUENCY MOTOR 0.37KW, TOTALLY 5 MOTORS ARE 4KW USING 28 VOLT SERIES CIRCUIT HEAT, 2 HEATING PANELS, EACH PANEL HAVE 8 PCS HEATING TUBE, EACH TUBE 300W, TOTALLY 4.8KW MACHINE WEIGHT: 800 KG MACHINE SIZE: LENGTH 5000 X WIDTH 1300 X HEIGHT 1600mm WOODEN CARTON SIZE: LENGTH 2600 X WIDTH 1900 X HEIGHT 1800mm Learn More

YY-1413 HIGH SPEED PRECISION DIE CUTTING MACHINE, PLATE DIMENSIONS 300 X 290mm, DAYLIGHT 28mm SPECIFICATION: 1. PRESS FORCE: 10 TONS 2. DAYLIGHT: 28mm 3. DIE CUTTING SPEED: 220 TIMES PER MINUTE 4. WIDTH ADJUST: ±5mm 5. SHUT HEIGHT OF METAL MOLD: 115mm 6. EFFECTIVE SIZE OF METAL MOLD: 300 X 290mm 7. MOLD SIZE: 350 X 350mm 8. TURNING WAY: ELECTRICALLY ADJUST 9. PRESS STYLE: JOG/SINGLE/CONTINUOUS 10. TYPE OF MOLD: PLASTIC BOARD MOLD, CHEMICAL SCULPTURE MOLD, METAL MOLD 11. MAX FEEDING WIDTH: ≤350mm 12. FEEDING SPEED: ≤30 METERS PER MINUTE 13. PRECISION OF FEEDING: <0.1mm 14. MATERIAL THICKNESS: 0.025 TO 2mm 15. DIE CUTTING PRECISION: ± 0.03mm 16. FEEDING ROLLER: PU/NBR 17. MATERIALS DRIVEN: SERVO MOTORS 18. LUBRICATE: FULLY AUTOMATIC CENTRAL LUBRICATION SYSTEM 19. PROTECTION: 3 OPTICAL SAFETY SENSORS 20. POWER SUPPLY: AC 380 VOLTS 5 KW 21. AIR SOURCE: 0.5 TO 0.6 MPA 22. WEIGHT OF MACHINE: AROUND 2000KGS 23. MACHINE SIZES (L X W X H): 1700 X 1150 X 1500mm QUANTITY: 1 Learn More

T-8347 CONTINUOUS PACKAGE WEIGHT CHECKING MACHINE, WIDTH 220mm, LENGTH 1300mm, SPEED 120 PIECE/MIN CONTAINS THREE SECTIONS: FIRST SECTION HOLDS THE PRODUCT, SECOND IS WEIGHING SECTION AND LAST COLLECTION WEIGHING RANGE: 5G-1500G MIN ACCURACY: ±0.5G BELT WIDTH: 220mm BELT LENGTH: 1300mm BELT HEIGHT: 750 ± 50mm BELT HEIGHT AND BASKET CAN BE ADJUST TO YOUR REQUIREMENT MIN SCALE INTERVAL: 0.1G MAX SPEED: 120 PIECE/MIN INCLUDING PUTTER, PROTECTION COVER, COLLECTION BOX, MAIN SYSTEM CHECKWEIGHER SUBSTANTIATES THE EXTENSIVE KNOW-HOW THAT THE COMPANY HAS ACCUMULATED IN WEIGHING TECHNOLOGY OVER THE YEARS. BY INCLUDING A HIGH-PRECISION WEIGHT CHECKING FUNCTION IN THE PRODUCTION LINE, YOUR PRODUCT QUALITY CAN IMPROVE WITHOUT ANY DECLINE IN EFFICIENCY. THE SERIES PROVIDES A WHOLE RANGE OF FEATURES FOR HANDLING DIFFERENT PRODUCTS AND INCORPORATE NEW FUNCTIONS IN RESPONSE TO MODERN NECESSITIES. Learn More

REFERENCE NUMBER: A-2492 1000 L STABILITY CHAMBER SPECIFICATIONS: INNER CHAMBER SIZE: 1 X 1 X 1 mm EXTERNAL DIMENSION: 1.2 X 1.97 X 2.17 mm TEMPERATURE RANGE: 70 TO 180°C HUMIDITY RANGE: 10% TO 98% RH, WHEN THE TEMPERATURE IS ABOVE 60°C, THE HUMIDITY CAN ACHIEVE 10% RH TEMPERATURE & HUMIDITY FLUCTUATION: ±0.2℃, ±0.5% RH INDICATION RESOLUTION: 0.01℃, 0.1% RH TEMPERATURE & HUMIDITY UNIFORMITY: ±2℃, ±3% RH (TESTED WITH THE EMPTY CHAMBER, 30 MINUTES AFTER STABILIZATION) HEAT UP AND COOL DOWN TIME: HEATING RATE: AVERAGE 3 ℃/MINUTES; COOLING RATE: AVERAGE 1 ℃/MINUTE (UNLOADED TEST) MATERIAL: INNER CHAMBER: SUS#304 STAINLESS STEEL EXTERIOR STRUCTURE: STAINLESS STEEL PLATE + POWDER COATED INSULATION: GLASS WOOL & PUF PERSPIRATION RESISTANT: K STYLE TUBE ACCESSORIES • TEMPERATURE RESISTANT SILICONE GASKET: 1 PC • CABLE PORT:1 PC; OD: 100 mm • WINDOW LIGHT: 1 PC • MULTIPANE VIEW WINDOW: 1 PC • LOADING SHELVES: 2 PCS REFRIGERATION & HEATING SYSTEM • ORIGINAL IMPORTED HIGH EFFICIENCY COMPRESSOR • AIR COOLING CONDENSER • FIN – TUBE HEATER • ORIGINAL IMPORTED SOLENOID VALVES • INNER SPIRAL K – TYPE REFRIGERANT COPPER TUBE • U – TYPE FINNED ELECTRO - THERMAL TUBE • HEATING & COOLING SYSTEMS SEPARATED • SINGLE STAGE REFRIGERATING SYSTEM HUMIDIFYING & DEHUMIDIFYING SYSTEM • ELECTRIC & BYTE TYPE HUMIDIFYING SYSTEM • STAINLESS STEEL HUMIDIFYING BARREL WITH VIEW WINDOW FOR WATER LEVEL • ADP DEHUMIDIFYING WAY • OVER – TEMPERATURE AND OVERFLOW PROTECTION UNITS • HUMIDIFYING & DEHUMIDIFYING SYSTEMS SEPARATED CIRCLING & DRAIN SYSTEM • CENTRIFUGAL FAN & IMPORTED MOTOR • REVERSE UNIFLOW (AIR FLOW DIRECTION) • FLOW – THROWS WIND • DRAIN SYSTEM USES SWIRL TYPE OUTLET AND U – TRAP DEPOSITION UNIT PROGRAMABLE MICRO COMPUTER LCD TOUCH CONTROLLER • PROGRAMMABLE TOUCH CONTROLLER, USER - FRIENDLY, STABLE AND EASY USE • PROGRAMS: 99 SEGMENTS PER PROGRAM, 120 PROGRAMS, 120 CYCLING PER PROGRAM • PID & SSR CONTROL WAY, STABLE AND EASY USE • HAVE SLOP CONTROL FUNCTION FOR HEATING & COOLING, LINKED PTNS CAN BE EXECUTED • PID AUTOMATIC CALCULATION • MICRO COMPUTER MULTI FUNCTION CONTROLLER, MAIN COMPONENTS ’DATA AUTOMATICALLY OUTPUT INCLUDING COMPRESSORS, SOLENOIDS, HEATING UNITS, ETC • ERRORS OF MAIN COMPONENTS APPEAR ON THE LCD PANEL • THE BRIGHTNESS OF THE LCD PANEL CAN BE ADJUSTED • TIME SEQUENCE CONTROL INTERFACE RELAYS HAVE 3 GROUPS WHICH MANAGE THE OUTPUT OF OUTSIDE LOGIC UNITS INCLUDING SIGNAL, MECHANICAL AND POWER, ETC • PROGRAMS AUTO – SAVE FUNCTION IF POWER CUT OFF SUDDENLY • HAVE HOLD & ADV BUTTONS INPROGRAMS • AUTOMATICALLY SET THE HIGH & LOW TEMPERATURE LIMITS AFTER PROGRAMS SET • PASSWORD SET FUNCTION • SD CARD SLOT, 2 GB SD CARD, RS232 OR ETHERNET (RJ45) OPERATING ENVIRONMENT • AMBIENT TEMPERATURE: +25℃ (2) RH ≤85% PROTECTION • ELECTRICITY LEAK PROTECTION • LIGHTNING STRIKE PROTECTION, ZRN LIGHTNING ARRESTER INSIDE THE CONTROLLER • SENSOR DATES TRANSFERRED INSIDE THE MICRO COMPUTER • TEMP. SENSORS TO OPEN CIRCUIT OR SHORT CIRCUIT (+ - OVER) • THE FIRST LEVEL OVER TEMPERATURE PROTECTION • ERROR DETECTED UNITS • THE SECOND LEVEL OVER TEMPERATURE PROTECTION TO ELECTRONIC OVER - TEMP PROTECTION UNIT • THE THIRD LEVEL OVER - TEMPERATURE PROTECTION • COMPRESSOR PROTECTION TO REFRIGERANTS PRESSURE PROTECTION & OVERLOAD PROTECTION. • EXTENDED PROTECTION UNIT TO TWO SUPPLETIVE PORTS • ERROR PROTECTION TO POWER CUT OFF, ERROR REPORTS SHOWN IN LCD PANEL AND AUDIBLE ALARM STARTS • DYNAMIC HIGH AND LOW TEMPERATURE PROTECTION • AMBIENT TEMPERATURE PROTECTION TO THE INNER CHAMBER AND SPECIMENS AUTOMATICALLY RETURN BACK TO AMBIENT TEMPERATURE AFTER THE OPERATION STOP SAFETY PROTECTION • NON-FUSE PROTECTION SWITCH • OVERHEAT ALARM PROTECTION • COMPRESSOR OVERLOAD PROTECTION • PHASE SEQUENCE PROTECTION • MOTOR OVER TO CURRENT PROTECTION Learn More

REFERENCE NUMBER: K-5426 MICRO FIBER OPENERS Learn More

REFERENCE NUMBER: K-3844 COMFORTER (QUILTER) PACKING AND BAGGING MACHINE DIMENSIONS: 1462 X 1060 X 1988mm POWER 500W VOLTAGE 220V 50HZ SINGLE PHASE WEIGHT 300KG USED FOR COMFORTER PACKING & BAGGING EASY TO OPERATION WITH 1 OPERATOR ELECTRICITY KEY PARTS ADOPT SIEMENS BRAND, STABLE & THEIR LOCAL SERVICE WILL SUPPORT YOU CHANGEABLE DIFFERENT DIMENSION PLATE MAIN STRUCUTRE MADE BY COMPUTERIZED LASER CUTTING MACHINE, STABLE & DURABLE CHANGEABLE PRESSING PLATES MEET DIFFERENT NEED. DIFFERENT POWER CONDITION AND SAFE STANDARD CAN BE ORDERED ACCORDING TO THE CLIENT’S LOCAL REQUIREMENT. QUANTITY AVAILABLE: 1 Learn More