Search results for: 'High temperature'

YY-3279 SGT – 600 GAS TURBINE GENERATOR SET, WITH INTEGRAL LOCAL EQUIPMENT ROOM UNIT(S) TO BE SUPPLIED ARE UNUSED, WITH ZERO RUNNING HOURS, NEVER INSTALLED. Learn More

YY-2424 USED NGR REGRANULATION LINE for BOPP FILM, FLUFF, LUMPS, MDO WASTE 900 TO 1000 KG PER H OVERCONSUMPTION: 500 KW OUTPUT: 1000 KGS PER HOUR INTENDED FOR THE FOLLOWING WASTE: OUTPUT; BOPP FILM, FLUFF, LUMPS, MDO WASTE: 900 TO 1000 KG/H; CPP FILM, FLUFF, LUMPS: 900 TO 1000 KG/H; PERFORMANCE IS PROVIDED FOR REFERENCE ONLY. THE CAPACITY OF THE DEVICE DEPENDS ON THE PROPERTIES OF THE MATERIAL, E.G. MOISTURE CONTENT, PRINTING, WEIGHT, MELT INDEX, CONTAMINATION AND DEGREE OF FILTRATION. AVERAGE POWER CONSUMPTION: 500 KW; AVERAGE COOLING WATER DEMAND: 668 L/MIN; AVERAGE FRESH WATER CONSUMPTION: 34 L/H; MAXIMUM COMPRESSED AIR CONSUMPTION: 100 L/MIN. THE VALUES GIVEN ABOVE ARE ONLY REFERENCE VALUES AND MAY DIFFER FROM THE VALUES FINAL VALUES OBTAINED AFTER CALIBRATION OF THE DEVICE. THIS DATA SHOULD NOT BE USED FOR PLANNING. Learn More

YY-3063 USED SOLAR TITAN 250S TURBINE-DRIVEN C51 CENTRIFUGAL COMPRESSORS SETS - USED - TWO (2) T250 TURBINE/C51-COMPRESSOR SETS AVAILABLE. - MANUFACTURED IN 2014 BY SOLAR TURBINES. Learn More

YY-2328 N5 HIGH PERFORMANCE HOT MELT TANK, HOPPER CAPACITY 5 KG DETAILS: HIGH QUALITY "MELT ON DEMAND" BASIC HOT MELT TANKS USED TO MELT AND PUMP A RANGE OF HOT MELT ADHESIVES AT PRECISE TEMPERATURES, FLOW RATES AND PRESSURES THROUGH FLEXIBLE HOT MELT HOSES TO HOT MELT HANDGUNS OR AUTOMATIC HOT MELT GUNS. OPTIONS: MOTOR ENABLE SWITCH TO TURN ON PUMP FROM DYNACHAMP HANDGUN. QUANTITY: 1 Learn More

TT-1112 EXTRUSION LAMINATOR, UP TO 2200mm, ONE SIDED LAMINATING MACHINE (480 VOLTS, 3-PHASE, 60Hz) MAIN PROCESS AND PARAMETERS TECHNOLOGICAL PROCESS MAIN UNWINDING, RECTIFYING, EXTRUDING, COMPOUND CUTTING AND REWINDING. MAIN TECHNICAL PARAMETERS 1. RAW MATERIAL: SUITABLE FOR COATING RESIN LDPE, PP AND OTHER COATING BASE MATERIAL. 2. AUXILIARY BASE MATERIAL: PAPER, NON-WOVEN FABRIC, ALUMINUM FILM, WOVEN CLOTH AND OTHER APPLICABLE MATERIALS MECHANICAL SPEED: 60 TO 150 METERS/MINUTE (ACTUAL SPEED DEPENDS ON FILM MATERIAL, FILM WIDTH AND THICKNESS, ETC.) EFFECTIVE WIDTH OF LAMINATING: 1200 TO 2000mm LAMINATING THICKNESS: 0.008 TO 0.080mm LAMINATING THICKNESS ERROR ±5% TENSION SETTING RANGE: 20 TO 200 KG/FULL WIDTH CONSTANT TENSION MAXIMUM EXTRUSION: 200 KG/HOUR INNER DIAMETER OF BASE MATERIAL ROLL CORE: 76mm MACHINE POWER: 100 KW ACTUAL OPERATING POWER IS 50 KW TO 60 KW CONTROL TYPE OF COMPOUND SPEED AND LAMINATING THICKNESS: PLC COMPUTER, FULLY AUTOMATIC ELECTRICAL CONTROL LAMINATING WITH EMBOSSING: SINGLE-LAYER Learn More

REFERENCE NUMBER: M-5300 (131342BVGT12UF) L UNDER PAD PRODUCTION LINE UNDER PAD PRODUCTION LINE MODEL: 100CD PRODUCTS TO BE PRODUCED: 3 SIZES OF DISPOSABLE UNDER PAD (SIZE: 600x900mm, 600x600mm, 600x400mm) MECHANICAL DRIVING SYSTEM WITH INVERTER CONTROL PRODUCT STRUCTURE: FLUFF +SAP; TOP TISSUE; BOTTOM TISSUE; TOP SHEET; BACK SHEET QUANTITY AVAILABLE: 1 Learn More

TT-6637 CATERPILLAR 3516B HD - NEW, 1820 KW, YEAR 2022 TO 2023, 50Hz/60Hz 1. CATERPILLAR 3516B HD 2. YEAR: 2022 TO 2023 3. VOLTAGE: 10.5KV/50Hz/60Hz 4. POWER: 1820 KW 5. HOURS: ZERO 6. NEW 7. FUEL:DIESEL OIL QUANTITY: 5 Learn More

TT-5991 CATERPILLAR 3516B HD PRIME DIESEL GENERATOR – NEW, 1820 KW, YEAR 2022 AND 2023 CATERPILLAR 3516B HD – NEW YEAR: 2022 AND 2023 HOURS: ZERO 1820 KW FUEL: DIESEL OIL IMMEDIATE DELIVERY QUANTITY: 5 Learn More

YY-2358 DM5 HOT MELT PAIL UNLOADER THE DM5 IS A STATIONARY PAIL MELTER (UNLOADER) THAT COMBINES A HEATED PLATEN, PUMP AND ALL CONTROLS NEEDED TO MELT AND DISPENSE HOT MELT ADHESIVES, SEALANTS, PURS OR COATINGS FROM A STANDARD 5-GALLON STEEL PAIL. THE CONTROLLER PROVIDES ACCURATE, PROPORTIONATE TEMPERATURE CONTROL FOR THE PLATEN, HOSES AND APPLICATORS. A “STANDBY” TEMPERATURE MAY BE PROGRAMMED SO THAT THE TEMPERATURE ZONES CAN BE INDEPENDENTLY MAINTAINED AT A LOWER TEMPERATURE WHEN THE UNIT IS NOT IN ACTIVE USE, ENABLING RAPID RETURN TO NORMAL OPERATION. A VARIETY OF GEAR PUMPS ARE AVAILABLE. THE MELTER CAN BE UTILIZED AS A BULK-TRANSFER UNIT OR AS A STAND-ALONE UNIT. IT CAN SUPPLY ONE OR TWO HAND-HELD APPLICATORS OR OTHER APPLICATORS. QUANTITY: 1 Learn More

T-6968 JENBACHER J626 GS-H102 4400KW 50Hz 10500V-SURPLUS NEW, YEAR 2018 QUANTITY: 2 Learn More