Search results for: 'pro 4 pro'

TT-1112 EXTRUSION LAMINATOR, UP TO 2200mm, ONE SIDED LAMINATING MACHINE (480 VOLTS, 3-PHASE, 60Hz) MAIN PROCESS AND PARAMETERS TECHNOLOGICAL PROCESS MAIN UNWINDING, RECTIFYING, EXTRUDING, COMPOUND CUTTING AND REWINDING. MAIN TECHNICAL PARAMETERS 1. RAW MATERIAL: SUITABLE FOR COATING RESIN LDPE, PP AND OTHER COATING BASE MATERIAL. 2. AUXILIARY BASE MATERIAL: PAPER, NON-WOVEN FABRIC, ALUMINUM FILM, WOVEN CLOTH AND OTHER APPLICABLE MATERIALS MECHANICAL SPEED: 60 TO 150 METERS/MINUTE (ACTUAL SPEED DEPENDS ON FILM MATERIAL, FILM WIDTH AND THICKNESS, ETC.) EFFECTIVE WIDTH OF LAMINATING: 1200 TO 2000mm LAMINATING THICKNESS: 0.008 TO 0.080mm LAMINATING THICKNESS ERROR ±5% TENSION SETTING RANGE: 20 TO 200 KG/FULL WIDTH CONSTANT TENSION MAXIMUM EXTRUSION: 200 KG/HOUR INNER DIAMETER OF BASE MATERIAL ROLL CORE: 76mm MACHINE POWER: 100 KW ACTUAL OPERATING POWER IS 50 KW TO 60 KW CONTROL TYPE OF COMPOUND SPEED AND LAMINATING THICKNESS: PLC COMPUTER, FULLY AUTOMATIC ELECTRICAL CONTROL LAMINATING WITH EMBOSSING: SINGLE-LAYER Learn More

REFERENCE NUMBER: M-5283 (13131CKAKT12U) L ELMARCO NANOSPIDER PRODUCTION LINE NANOSPIDER PRODUCTION LINE NS 4S1000U QUANTITY AVILABLE: 1 Learn More

YY-2894 NEW SIEMENS SGT 400, YEAR 2018 SIEMENS SGT 400 (12.9 MW) GAS TURBINE · 11-STAGE COMPRESSOR, 6 COMBUSTION CHAMBERS, 2-STAGE POWER TURBINE · GAS FUEL SYSTEM · DLE COMBUSTION SYSTEM · HOT-END DRIVE · 2-SHAFT ENGINE · LEFT-HAND EXHAUST · MAIN LUBRICATION PUMP · EQUIVALENT OPERATING HOURS : 0H · TOTAL STARTS : 0 · NEW, NEVER INSTALLED OR COMMISSIONED QUANTITY: 1 Learn More

TT-5031 WORSTED SPINNING AND RE-COMBING INSTALLATION FOR FINE COUNT OF WOOL, YEAR 1983 TO 2006 WORSTED SPINNING AND RE-COMBING INSTALLATION FOR FINE COUNT OF WOOL COMPACT SYSTEM FROM NM.1/40 UP TO NM.1/80 PRODUCTION CAPACITY 3,500 KG PER 24 HOURS Learn More

T-1652 SGT 400 GAS TURBINE, 50Hz, YEAR 2017, 11 KV, 12.9 MW SGT 400 GAS TURBINE TYPE: STANDARD BRAND: SIEMENS CATEGORY: ENGINES/GENERATORS/MOTORS/TRANSMISSIONS SUBCATEGORY: TURBINE IN STOCK: YES CONDITION: EXCELLENT TYPE: UNUSED SGT-400 GAS TURBINE GENERATOR SET, WITH INTEGRAL LOCAL EQUIPMENT ROOM: UNIT(S) TO BE SUPPLIED ARE UNUSED, WITH ZERO RUNNING HOURS, NEVER INSTALLED THESE UNITS HAVE BEEN STORED INDOORS SINCE MANUFACTURE. QUANTITY: 2 Learn More

REFERENCE NUMBER: M-3112 (7701171GT6UF) FROZEN FRENCH FRY PRODUCTION LINE 300KG (NEW) PROCESSING PROCEDURE： POTATO PEELING AND WASHING MACHINE—INSPECTION MACHINE—SLICING MACHINE—HOIST—BLANCHING MACHINE—DRYING MACHINE (OR VIBRATING SCREEN)—FRYING MACHINE (WITH OIL FILTER)—DRYING MACHINE—MIXER (FOR CHIPS)—PACKING MACHINE QUANTITY AVAILABLE: 1 Learn More

TT-7680 SIEMENS SST 400 CONDENSING STEAM TURBINE, YEAR 2011, 50/60Hz, 30 MW SIEMENS SST 400 YEAR 2011 TYPE: SST 400 CONDENSING STEAM TURBINE WITH FOUR BLEEDS AND ONE EXTRACTION TURBOSE OUTPUT: (AT GENERATOR TERMINALS) NORMAL 30 MW MAXIMAL 31.88 MW MINIMAL 4.5 MW QUANTITY: 4 Learn More

C-3985 COMPLETE CFS AQUARIUS BALL LOLLIPOP LINE, YEAR 2004 TO 2006

OFFER 001
COMPLETE CFS AQUARIUS BALL LOLLIPOP LINE
YEAR: 2004 TO 2006

OFFER 002
KLOCKNER HANSEL PROCESSING BATCH ROLLER
YEAR: 2006

OFFER 003
KLOCKNER HANSEL PROCESSING ROPE SIZER
YEAR: 2006

OFFER 004
CFS AQUARIUS B.V. BALL FORMER 1000
YEAR: 2005

OFFER 005
CFS AQUARIUS CONVEYOR BELT
YEAR: 2004

OFFER 006
LOLLIPOP COOLER B
YEAR: 2005

OFFER 007
CFS AQUARIUS B.V. BUNCH WRAPPER 600
YEAR: 2005

QUANTITY: 1 LINE

Learn More

TT-2909 PROBAT 23R ACO ROASTING PLANT, 240 KILO, YEAR REFURBISHED 2018 PROBAT-BURNS ACCLAIMED 23R ACO COFFEE ROASTING PLANT 4-BAG COFFEE ROASTING PLANT PROBAT-BURNS MODEL 23R “ACO” (AUTOMATIC CLEAN OUT) CAPACITY IS REPORTED TO BE 200 TO 540 LBS. (90 TO 240 KG) @ 4-5 BATCHES PER HOUR (NOMINAL). THAT'S UP TO 2,500 LBS. (1,134 KG) PER HOUR THIS MACHINE HAS ONLY RAN 3 HOURS P/DAY FOR LESS THAN 3 YEARS SINCE PUT ONLINE AFTER COMPLETE REFURBISH IN 2018. THIS EQUIPMENT SET IS CURRENTLY DECOMMISSIONED AND DISASSEMBLED SITTING ON PALLETS, READY FOR FREIGHT PREP AND SHIPPING. COMPLETELY REFURBISHED IN 2018, IT HAS BEEN OFFLINE FOR ABOUT 9 MONTHS. IT'S IN EXCELLENT CONDITION, RUNS PERFECTLY. FUELED BY NATURAL GAS, POWERED BY 480 VOLT. THIS 23R ACO HAS MANUAL ROAST CONTROLS. CAN BE UPGRADED TO FULLY AUTOMATED Learn More

L-4639 VERTICAL AND HORIZONTAL CNC OSCILLATING SPONG CUTTING MACHINE

WITH TURN TABLE

MAX. PROCESSING LENGTH: 2200mm

MAX. PROCESSING WIDTH: 2200mm

MAX. PROCESSING HEIGHT: 1500mm

VIBRATION BLADE SPEED: 0 TO 10 METERS PER MINUTE

Learn More