Search results for: 'soft w'

TT-2192 CCI SAMPLE SINGLE END WARPING AND SAMPLE DESK LOOM, WIDTH 900mm, YEAR 2012, DOBBY ITEM 001 CCI EVERGREEN SAMPLE LOOM MAX MECH SPEED 50 ITEM 002 SAMPLE WARPER MINI LUTAN SPEED 100000mm PER MIN Learn More

TT-2153 SIEMENS SGT-800 GAS TURBINE, 54 MW, 11 KV, 50 Hz AND 1500 RPM, FUEL NATURAL GAS, FREQUENCY 50/60 Hz GROSS EFFICIENCY 38.86.0% HEAT RATE9, 256 KJ/KWH UNUSED CONDITION: EXCELLENT (NEW SURPLUS) TURBINES STORED TO SIEMENS RECOMMENDATION. NOTE: THIS IS A PACKAGE DEAL AND REQUIRES BUYER TO PURCHASE ALL 3 UNITS. POI AND POF REQUIRED UPFRONT. QUANTITY: 3 Learn More

J-4722 GE LM6000 PA GAS TURBINE, 42 MW, 50 Hz, DUAL FUEL, 10,500 VOLTS MAKE: GE MODEL: LM6000 PA YEAR: 1993 42 MW 50 Hz DUAL FUEL 10,500 VOLTS CONDITION: USED, 12,000 HOURS QUANTITY: 1 Learn More

YY-2260 AUTOMATIC HIGH SPEED SLITTING REWINDING MACHINE, SLITTING WIDTH 30 TO 1700 mm, WINDING DIAMETER UP TO 1400mm SUITABLE MATERIALS REEL-SHAPED PLASTIC FILMS, LAMINATED FILMS, PAPER, ETC. SPEED: 0 TO 400M/MIN; SLITTING WIDTH: 30 TO 1700mm; UNWINDING DIAMETER: MAXIMUM Ø1400mm; WINDING DIAMETER: Ø610mm; MACHINE WEIGHT: 1800KG; TOTAL MOTOR POWER: 29KW; DIMENSIONS: W 3200 × L 3500 × H 1900 (mm); RETRACTABLE PAPER CORE: 3" (DIAMETER Φ76mm DIAMETER Φ92mm); CORRECTION ACCURACY: ≤ 0.30mm; TENSION SETTING RANGE: 2 ~ 30KG; WINDING MOTOR POWER: 7.5KW X 2; TRACTION MOTOR: 7.5KW; MACHINE COLOR STANDARD WHITE (OR AS REQUIRED). QUANTITY: 1 Learn More

YY-1521COMPUTERIZED SINGLE HEAD QUILTING MACHINE QUANTITY: 1 Learn More

T-8260 ALBRECHT BAUMER IS-M, 40 METERS PER MINUTE, CUT HEIGHT 1300mm, YEAR 1987 MAKE: ALBRECHT BAUMER MODEL: IS-M SPEED: 0 TO 40 METERS PER MINUTE CUTTING HEIGHT: 1300mm KNIFE MEASUREMENTS: 10 x 0.45 x 10350mm POWER SUPPLY: 380 VOLTS, 3-PHASE, 50 Hz POWER REQUIREMENT: 4 KW YEAR: 1987 RIGHT TABLE: 2435mm BUN WIDTH (RIGHT TABLE): 2200mm BUN LENGTH: 2580mm LEFT TABLE: 2435mm BUN WIDTH (LEFT TABLE): 2200mm BUN LENGTH: 2580mm) QUANTITY: 1 Learn More

REFERENCE NUMBER: L-1511
UNIVERSAL TESTING MACHINE
QUANTITY: 1

Learn More

REFERENCE NUMBER: L-4955
BRAND: BENNINGER
MODEL: SIZETEC
TYPE: BB-S/ZT4/4TKD
YEAR: 1994

Learn More

C-3994 BARGEMOUNTED POWER PLANT, CAPACITY 220MW

A. ONCE THROUGH STEAM GENERATOR
B. BARGE
C. CHILLERS
D. AIR COMPRESSOR
E. GAS TURBINE
F. STEAM TURBINE
G. FEEDWATER SYSTEM
H. CLOSED COOLING WATER SYSTEM
I. AUXILIARY COOLING WATER SYSTEM
J. CONDENSATE POLISHING UNIT (CPU)
K. WASTE WATER SYSTEM
L. PLANT ELECTRICAL SYSTEM
M. BLACK START DG SET
N. PLANT CONTROLS AND INSTRUMENTATION
O. PLANT FIRE FIGHTING SYSTEM
P. START UP VACUUM SYSTEM
Q. STEAM TURBINE DEAERATING CONDENSER

QUANTITY: 1 PLANT

Learn More

REFERENCE NUMBER: V-1029 GERBER GT5250 MULTIFOLD LYING AND CUTTING UNIT YEAR 2004 WIDTH 1700-3300mm (130 inches) MULTIFOLD LYING-AND CUTTING UNIT MAKE GERBER, TYPE GT5250, YEAR 2004 CUTTING WIDTHS 1700mm, 2000mm, 2400mm AND 3300mm CUTTING HEIGHT 5.2 CM, CUTTING LENGTHS 170, AND 254 CM (MAXIMUM) CUTTING SPEED 30.5 M/MIN HEAD SPEEDING UP 2.4 M\S, WITH C-200 CONTROL UNIT AND SOFTWARE THE CUTTER WORKED LESS SEE PHOTOGRAPHS, CONDITION VERY GOOD REFERENCE NUMBER: V-1029 GERBER GT5250 MULTIFOLD LYING AND CUTTING UNIT YEAR 2004 WIDTH 1700-3300mm (130 inches) MULTIFOLD LYING-AND CUTTING UNIT MAKE GERBER, TYPE GT5250, YEAR 2004 CUTTING WIDTHS 1700mm, 2000mm, 2400mm AND 3300mm CUTTING HEIGHT 5.2 CM, CUTTING LENGTHS 170, AND 254 CM (MAXIMUM) CUTTING SPEED 30.5 M/MIN HEAD SPEEDING UP 2.4 M\S, WITH C-200 CONTROL UNIT AND SOFTWARE THE CUTTER WORKED LESS SEE PHOTOGRAPHS, CONDITION VERY GOOD TABLE LENGTH 8500mm (28 FEET) MACHINE IS ON THE MILL FLOOR CAN SEE IT RUNNING QUANTITY AVAILABLE: 1 Learn More