Search results for: 'GEA'

REFERENCE NUMBER: G-5659 RAG TEARING MACHINE - NEW IT IS USED TO OPEN THE YARN WASTE, FABRIC WASTE, HELP TO LOOSEN THE FIBER OF THE FABRIC WASTE, YARN WASTE ETC. IT CAN HELP TO PROTECT THE FIBER LENGTH OF THE REGENERATED COTTON ON THE HIGHEST LEVEL . IT INCLUDES WASTE REMOVAL SYSTEM, SO THAT RAW MATERIAL NOT WELL PROCESSED WILL BE SENT BACK AUTOMATICALLY BY THE WASTE REMOVAL SYSTEM. QUANTITY AVAILABLE: 1 Learn More

INVENTORY NUMBER: E-4258 POLYESTER PACKING TAPE MACHINE (FROM RECYCLED PET SCRAP): XDC TSE-65/32 PET PRODUCTION CONDITION: NEW 1. ELECTRICAL VOLTAGE: 380V/3P/50HZ OR AS PER CUSTOMER 2. MATERIAL: PET SCRAP 3. MAX. EXTRUSION OUTPUT: 350KG PER HOUR NOTE：PRODUCTION CAPACITY DEPENDS ON RAW MATERIAL AND OPERATION. 4. SPECIFICATION：WIDTH OF TAPE 9 TO 24 mm, THICKNESS: 0.5 TO 1.2 mm 5. LINE SPEED：80M/MIN 6. CENTER HEIGHT OF EXTRUDER: 1000 mm 7. OPERATION DIRECTION: FROM RIGHT TO LEFT 8. POWER REQUIREMENT: 212KW（APPROX. 127KW AT CONTINUOUS USAGE） 9. COOLING RECYCLE: ≤20℃ ≥0.3MPA ～2T/H 10. AIR CONSUMPTION: 0.4 CUBIC METER PER MINUTE; PRESSURE ＞0.5MPA QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-5243 (YOU MUST LOOK AT THE VIDEO, IT’S AMAZING) AUTOMATIC TRIMMING MACHINE FOR FOAM BLOCKS OR FOAM MATTRESSES, FOUR SIDES DESCRIPTION: PU SLABS CUT FROM FOAM BLOCK BY HORIZONTAL CUTTING UNDERGO PERIMETRICAL STRETCHING, (SOMETIMES A FEW CENTIMETERS STRETCHING). IN ORDER TO ACHIEVE SATISFACTORY SIZES (±1MM EACH SIDE) THE REMOVING OF IRREGULAR EDGES IS REQUIRED. THIS MACHINE TRIMS FOAM SLABS AND ALSO COUPLED SLABS. IT CAN BE PLACED AT THE END OF THE MATTRESS GLUING PLANT (MANUAL OR AUTOMATIC) OR BEYOND THE HORIZONTAL CUTTING MACHINE. THE COUPLED FOAM SHEETS ARE NOT ALIGNED AND NEED TO BE TRIMMED. OFTEN THE COUPLED MATTRESSES ARE TRIMMED ONE BY ONE ALONG THE FOUR SIDES WITH A MANUAL VERTICAL CUTTING MACHINE WASTING A LARGE AMOUNT OF TIME. THIS MACHINE AUTOMATICALLY TRIMS THE FOUR SIDES OF FOAM MATTRESSES WITHOUT ANY HANDLING; THAT MEANS AN ACCURATE TRIM AND SHORT PROCESSING TIME. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-2246 FOAM DRILLING MACHINE-FOR FOAM MATTRESS 2200 X 2200 X 1800mm MODEL F26 LOADING CONVEYOR 2100 X 2100mm UNLOADING CONVEYOR 2100 X 2100mm MAX. DRILLING WIDTH 2100mm MAXIJMUM LENGTH 2100mm MAX. DRILLING HEIGHT 180mm HOLE DIAMETER 6-30mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-8444 PUNCHING MACHINE MODEL FST 11 MACHINE AVAILABLE FOR AUTOMATIC DRILLING IN SHEETS OF PU FOAM, MEMORY FOAM, LATEX, EVA, NEOPRENE. WITH 20mm THICKNESS UP 2 DRILLINGS PER SECOND ARE PERFORMED; E.G.: ONE MOULD FOR 2mm DIAM. HOLES AND 50mm WHEEL BASE OF PUNCH, 7mm X 3.5 CROSSED HOLE PITCH: THE MACHINE WILL PERFORM NO 2310 HOLES EACH DRILLING CYCLE WITH 4620 HOLES PER SECOND IN TOTAL. THAT MEANS THE MACHINE CAN DRILL A FOAM SHEET DIM. 1000X1100mm EACH 20 SECONDS WITH 92400 HOLES IN TOTAL. TWO DRILLING TYPES ARE POSSIBLE: CONTINUOUS DRILLING “A-PERFORM” (NO DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS –SEE TAB. 31A); CONTINUOUS DRILLING “B-PERFORM” (WITH FIXED DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS). THE DISTANCE CAN BE MODIFIED BY OPERATOR). UP TO 150 20mm-THICKNESS MATTRESSES CAN BE PRODUCED IN ONE HOUR; BY INCREASING THE THICKNESS THE PRODUCTION WILL REDUCE. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-8444-A PUNCHING MACHINE MODEL FST 11 FOR LATEX MACHINE AVAILABLE FOR AUTOMATIC DRILLING IN SHEETS OF PU FOAM, MEMORY FOAM, LATEX, EVA, NEOPRENE. WITH 20mm THICKNESS UP 2 DRILLINGS PER SECOND ARE PERFORMED; E.G.: ONE MOULD FOR 2mm DIAM. HOLES AND 50mm WHEEL BASE OF PUNCH, 7mm X 3.5 CROSSED HOLE PITCH: THE MACHINE WILL PERFORM NO 2310 HOLES EACH DRILLING CYCLE WITH 4620 HOLES PER SECOND IN TOTAL. THAT MEANS THE MACHINE CAN DRILL A FOAM SHEET DIM. 1000X1100mm EACH 20 SECONDS WITH 92400 HOLES IN TOTAL. TWO DRILLING TYPES ARE POSSIBLE: CONTINUOUS DRILLING “A-PERFORM” (NO DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS –SEE TAB. 31A); CONTINUOUS DRILLING “B-PERFORM” (WITH FIXED DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS). THE DISTANCE CAN BE MODIFIED BY OPERATOR). UP TO 150 20mm-THICKNESS MATTRESSES CAN BE PRODUCED IN ONE HOUR; BY INCREASING THE THICKNESS THE PRODUCTION WILL REDUCE. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-1441 CONVOLUTER MODEL BF WORKING CUTTING WIDTH: 2000mm (78.7") WORKING CUTTING HEIGHT: 20/180mm (7" MAXIMUM) HEIGHT ADJUSTABLE LOADING ROLLER-TABLE: 1000 X 2000mm (39.3" X 78.7") UNLOADING TABLE: 1000 X 2000mm (39.2" X 78.7") MAXIMUM WAVE HEIGHT: 5/80mm (3.14") BLADE BRAKE MOTOR: 4 KW CUTTING SPEED (MOTOR SPEED VARIATOR WITH ADJUSTABLE SPEED BY MEANS OF HAND-WHEEL): 13m/MIN POWER: 5.5 KW TENSION: 400V 50 HZ WEIGHT: 1800 KGS QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-6332 BOX MIXING TANK FOR FOAM (NEW) WITH AUTOMATIC COMPUTERIZED CHEMICAL FEED QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: A-1243 (0101GHBXX12) A MACHINERY AND EXTRUSION RELATED MACHINES REFERENCE #102: 1 BARMAG EXTRUDER DIA. 90 WITH CONTROL PANEL REFERENCE #103: 4 BARMAG EXTRUDERS 28 MM REFERENCE #104: 1 PLASTICIZERS EXTRUDER 40 MM REFERENCE #105: 1 PLASTICISERS EXTRUDER 20 MM REFERENCE #108: 1 NYLON POLYMER DRYER REFERENCE #110: 50 SAHM WINDERS TRAVERSE 200 MM X CORE 35 MM REFERENCE #111: 32 SAHM WINDERS – TRAVERSE 200MM X CORE 35 MM REFERENCE #113: 31 LEESONA WINDERS – TYPE 969 – TRAVERSE 300 MM REFERENCE #114: 9 SAHM WINDERS TYPE 280 – TRAVERSE 300 MM + PANEL REFERENCE #119: 1 OVEN - BARMAG LONG 3000 MM X ENTRANCE 1400 MM REFERENCE #127: 1 SETS OF GODETS 7 ROLLERS – 1150 MM X 200 MM DIA – 2 HEATED ROLLERS AND 1 CHILLED ROLLER + OIL HEATER - BARMAG REFERENCE #129: 1 SET OF GODETS 3 ROLLERS – 1150 X 200 MM DIA - BARMAG REFERENCE #131: NEW PARTS OF A RECYCLING LINE – DIA 120 MM – NEW SCREW – WITH SPAGHETTI DIE – + DAVID BROWN GEARBOX FOR A 150 HP MOTOR REFERENCE #132: 1 LABORATORIUM LDPE “PLASTICIZERS” – EXTRUDER 20MM REFERENCE #134: 1 SEMI-AUTOMATIC BALING-PRESS, PRESSURE 60 TONS, AUTEFA REFERENCE #134B: 1 HORIZONTAL PRESS REFERENCE #137: 1 NEUMAG STAPLE FIBRE CRIMPER – ENTRANCE 80 MM REFERENCE #139: 1 NEUMAG WITRAS 6008R FOR 8 ENDS – ALMOST NEW, ONLY USED FOR A FEW MONTHS YEAR 2000 REFERENCE #142: OIL HEATERS REFERENCE #143: INOX WATERBATH – WIDTH 1200 MM REFERENCE #144: INOX WATERBATH – WIDTH 750 MM REFERENCE #146: SEVERAL SAHM WINDERS FOR CF YARN REFERENCE #147: SEVERAL BARMAG SPINNZWIRN LFW 25 WINDERS REFERENCE #148: STAPLE FIBER CUTTER – TYPE LUMMUS –WITH 2 CUTTER REELS WITH KNIVES REFERENCE #152: 1 SCREENCHANGER – AUTOSCREEN - WAS FITTED ON A 45 MM EXTRUDER REFERENCE #153: SEVERAL FLAT TAPE DIES – 800 MM WIDTH – REFERENCE #164: 2 FANS WITH MOTORS OF ABOUT 12 KW REFERENCE #165: 1 SPAGHETTI DIE REFERENCE #167: 36 SAHM FLANGE WINDERS – TYPE 211 + PANEL QUANTITY AVAILABLE: 35 Learn More

REFERENCE NUMBER: M-5238 (1313AJWNXX12U) L HFO POWER PLANTS (6MW EACH, TOTAL 24MW) YEAR 2008 – NEW (NEVER USED) HFO POWER PLANTS 6MW EACH TOTALLING 24MW YEAR 2008 WITH 50HZ NEW (NEVER USED) QUANTITY AVAILABLE: 4 Learn More